Shower Heads

Showing all 6 results

APS User Adjustable Vandal Resistant Shower Head

Willoughby model APS User Adjustable, Vandal Resistant Shower Head shall be fixed type, constructed of Type 303 stainless steel, mounted from the rear with no visible fasteners or removable parts, and shall have a 30° angle of spray. The head shall have 3/8" F.I.P. threads on the inlet. Spray pattern is adjustable by the user.
NPS Non-Adjustable Vandal Resistant Shower Head
Willoughby model NPS Non-Adjustable Vandal Resistant Shower Head shall be fixed type, constructed of Type 303 stainless steel, mounted from the rear with no visible fasteners or removable parts, and shall have a 30° angle of spray with an adjustable pattern. The head shall have 3/8" F.I.P. threads on the inlet. The shower head is non-adjustable from the user side. To adjust shower nozzle spray pattern, insert 1/8" Allen wrench through the nozzle orifice when shower is not in use, and turn counterclockwise to widen the spray pattern or clockwise to narrow the spray pattern.
UBJ Universal Ball Joint Shower Head
Willoughby model UBJ Universal Ball Joint Shower Head shall be fixed type, constructed of chrome-plated brass, mounted from the rear with no visible fasteners or removable parts. The head shall have 3/8" F.I.P. threads on the inlet. The shower head spray direction is user adjustable.
LBJ Lockable Ball Joint Shower Head
Willoughby model LBJ Lockable Ball Joint Shower Head shall be fixed type, constructed of chrome-plated brass, mounted from the rear with no visible fasteners or removable parts. The head shall have 3/8" F.I.P. threads on the inlet. The shower head spray direction can be locked in position using the recessed set screw.
CSH Ligature-Resistant Vandal Resistant Shower Head
Willoughby model CSH Ligature-Resistant Vandal Resistant Shower Head shall be fixed type, constructed of Type 303 stainless steel, mounted from the rear with no visible fasteners, and shall have a 30° angle of spray through a Delrin insert, retained by a stainless steel Pin-Torx security screw. The head shall have 3/8" F.I.P. threads on the inlet. The entire unit has a ligature-resistant rounded and tapered design.
LRSH Ligature-Resistant High-Efficiency Shower Head
Willoughby model LRSH Ligature-Resistant, High-Efficiency Shower Head shall be fixed type, with chrome-plated, die-cast construction. The vandal resistant shower head shall be rear mounted with no visible fasteners.The shower head shall have a 30° angle of spray, with 2.0 GPM maximum flow rate at 80psi and 1.5 GPM minimum flow rate at 45psi. The inlet connection shall be threaded for 3/8" F.I.P. The LRSH has a rounded and tapered design to minimize any potential ligature points, and shall meet the requirements of ASME A112.18.1 / CSA B125.1, WaterSense. Shower head shall be for use with automatic compensating valves rated at 1.5 GPM (6 L/minute) minimum or less.