Behavioral Health
Showing all 38 results
-
AS-S3060ADA AquaSurf® Solid Surface 30×60 Roll-in Shower Base w/Integral Rear Trench Drain
The Willoughby AS-S3060ADA AquaSurf® Solid Surface ADA Roll In Shower Base, with Integral Rear Trench Drain, is a single-user 30 x 60 shower base for use in commercial, healthcare, and other environments. Willoughby AquaSurf® shower bases are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard AS-S3060ADA shower base features include integrally molded underside bracing; sloped, textured floor; integral perimeter flanges, threshold, and curb; heavy gauge stainless steel trench grate; and 2” O.D. no-hub drain. The rear drain is available in Left, Center, or Right configurations. The AS-S3060ADA shower bases can be supplied with optional color-matched, solid surface wall panel components (installation by others) for finishing a complete shower area enclosure. All connections between the outside plumbing and the AS-S3636ADA shower base are made underneath the fixture. -
AS-S3060ADAF AquaSurf® Solid Surface 30×60 Roll-in Shower Base w/Integral Front Trench Drain
The Willoughby AS-S3060ADAF AquaSurf® Solid Surface 30x60 ADA-Compliant Roll-in Shower Base, with Integral Front Trench Drain, is a single-user fixture for use in commercial, healthcare, and other environments. Willoughby AquaSurf® shower bases are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard AS-S3060ADAF shower base features include integrally molded underside bracing; sloped, textured floor; integral perimeter flanges, threshold, and curb; heavy gauge stainless steel trench grate; and 2” O.D. no-hub drain. The front drain is available in Left, Center, or Right configurations. The AS-S3060ADAF shower bases can be supplied with optional color-matched, solid surface wall panel components (installation by others) for finishing a complete shower area enclosure. All connections between the outside plumbing and the AS-S3060ADAF shower base are made underneath the fixture. -
AS-S3636ADAF AquaSurf® Solid Surface 36×36 ADA-Compliant Transfer Shower Base w/Integral Front Trench Drain
The Willoughby AS-S3636ADAF AquaSurf® Solid Surface 36x36 ADA-Compliant Transfer Shower Base (ADA Shower Pan), with Integral Front Trench Drain, is a single-user fixture for use in commercial, healthcare, and other environments. Willoughby AquaSurf® shower bases are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard AS-S3636ADAF shower base features include integrally molded underside bracing; sloped, textured floor; integral perimeter flanges, threshold, and curb; heavy gauge stainless steel trench grate; and 2” O.D. no-hub drain. The front drain is available in Left, Center, or Right configurations. The AS-S3636ADAF shower bases can be supplied with optional color-matched, solid surface wall panel components (installation by others) for finishing a complete shower area enclosure. All connections between the outside plumbing and the AS-S3636ADAF shower base are made underneath the fixture. -
PML-BHF VALVE
The Willoughby PML-BHF Lead-free, Behavioral Healthcare Pneumatic Faucet is a ligature-resistant water control valve for use with plumbing fixtures in security, commercial, and healthcare environments. They are designed to replace existing valves on china and aluminum fixtures without integral bubblers, and can be specified in either Single Temp. (PML1-BHF) or Dual Temp. (PML2-BHF) configuration. Standard PML-BHF valve assemblies are made from components complying with NSF-61, and will typically come with stainless steel push buttons, stainless steel bubbler, pneumatic tubing and fittings, and associated plumbing connections. The valve assembly is designed for operational pressure between 35-70 psi, 90 psi max., and is supplied with an appropriate flex hose (1/2” F.P.T.) to connect to the operational water supply. (Flex hose is supplied standard unless otherwise specified.) Both PML1-BHF and PML1-BHF valve assemblies can be supplied with an optional thermostatic mixing valve. A galvanized mounting plate is provided for secure anchoring of the valve assembly (anchoring hardware by others). -
LRFC Ligature-Resistant Infrared Faucet
The Willoughby LRFC Ligature-Resistant, Infrared Faucet—constructed from cast 304 stainless steel—is recommended for high-use areas where risk accommodations are a concern, such as behavioral healthcare and mental health facilities. These faucets feature a contoured design and IR sensor with preset, elapsed time lockouts to minimize vandalism and, with the 4” center set, are ready for new construction projects or retrofitting existing lavatories. The LRFC comes with all the necessary mounting hardware to install on lavatories and provide a water-tight seal, along with a battery-operated or hard-wired valve and power supply. Additionally, there is a serviceable insert for non-aerated, laminar flow with smart lime cleaning technology that provides additional protection against vandalism. All faucets offer a 35° angle of spray with 16° maximum swivel adjustment and maximum flow rate of 1.5 GPM. -
LRFC-PBH Ligature-Resistant Pneumatic Push Button Faucet
The Willoughby LRFC-PBH Ligature-Resistant, Pneumatic Push Button Faucet—constructed from cast 304 stainless steel—is recommended for high-use areas where risk accommodations are a concern, such as behavioral healthcare and mental health facilities. These faucets feature a contoured design to minimize any potential ligature points and, with the 4” center set, are ready for new construction projects or retrofitting existing lavatories. The LRFC-PBH comes with all the necessary mounting hardware to install on lavatories and provide a water-tight seal. Additionally, there is a serviceable insert for non-aerated, laminar flow with smart lime cleaning technology that provides additional protection against vandalism. All faucets offer a 35° angle of spray with 16° maximum swivel adjustment and maximum flow rate of 1.5 GPM. -
LRFC-PZPB Ligature-Resistant Piezo Electronic Push Button Faucet
The Willoughby LRFC-PZPB Ligature-Resistant, Piezo Electronic Push Button Faucet—constructed from cast 304 stainless steel—is recommended for high-use areas where risk accommodations are a concern, such as behavioral healthcare and mental health facilities. These faucets feature a contoured design to minimize any potential ligature points and, with the 4” center set, are ready for new construction projects or retrofitting existing lavatories. The LRFC-PZPB comes with all the necessary mounting hardware to install on lavatories and provide a water-tight seal. Additionally, there is a serviceable insert for non-aerated, laminar flow with smart lime cleaning technology that provides additional protection against vandalism. All faucets offer a 35° angle of spray with 16° maximum swivel adjustment and maximum flow rate of 1.5 GPM. -
LRBHL-2220 Ligature-resistant Solid Surface, Behavioral Healthcare Lavatory (for Deck Mounted Faucet)
The Willoughby LRBHL-2220 Ligature-resistant Solid Surface Behavioral Healthcare Lavatory (for Deck Mounted Faucet) is a single-user fixture for vandal-resistant behavioral healthcare environments. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. The rounded lavatory has been thoughtfully designed to minimize potential ligature points. Standard LRBHL-2220 fixtures shall be supplied with ligature-resistant drain and tailpiece. Fixtures with optional LRFC faucet shall be furnished with integral checkstop, flexible supply hoses, control valve, and valve power supply. An optional in-line thermostatic mixing valve is available. All connections between the outside plumbing and the LRBHL-2220 behavioral healthcare lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, TAS, UFAS, CBC, and ANSI accessibility guidelines when mounted at the correct, applicable rim height above the finished floor. A removable trap cover attached w/ security screws allows access to all fixture plumbing and mounting points inside. -
LRBHL-2320 Ligature-resistant Solid Surface, Behavioral Healthcare Lavatory
The Willoughby LRBHL-2320 Ligature-resistant Solid Surface Behavioral Healthcare Lavatory is a single-user fixture for vandal-resistant behavioral healthcare environments. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard LRBHL-2320 fixtures come with a contoured lavatory basin; drain assembly; selected valve, control, and plumbing; and inline thermostatic mixing valve; with anchoring through the preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). The rounded lavatory has been thoughtfully designed to minimize potential ligature points. All connections between the outside plumbing and the LRBHL-2320 behavioral healthcare lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached w/ security screws allows access to all fixture plumbing and mounting points inside. -
ASWLDR-1922 Ligature-resistant Stainless Steel Behavioral Healthcare Lavatory
The Willoughby ASWLDR-1922 Ligature-resistant Stainless Steel Behavioral Healthcare Lavatory is a single-user fixture for vandal-resistant behavioral healthcare environments. Willoughby stainless steel lavatory fixtures are all-welded, fabricated from T304 stainless steel, polished to a #4 satin finish. Standard ASWLDR-1922 fixtures come with a round lavatory basin w/ slow drain; selected valve, control, and plumbing; and inline thermostatic mixing valve; with anchoring through the heavy gauge steel backplate (anchoring hardware and adequate backing by others). The rounded lavatory has been thoughtfully designed to minimize potential ligature points. All connections between the outside plumbing and the ASWLDR-1922 behavioral healthcare lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached w/ security screws allows access to all fixture plumbing and mounting points inside. -
ASWLDR-1922-DMF Ligature-resistant Stainless Steel Behavioral Healthcare Lavatory
The Willoughby ASWLDR-1922-DMF Ligature-resistant Stainless Steel Behavioral Healthcare Lavatory is a single-user fixture for vandal-resistant behavioral healthcare environments. Willoughby stainless steel lavatory fixtures are all-welded, fabricated from T304 stainless steel, polished to a #4 satin finish. Standard ASWLDR-1922-DMF fixtures come with a round lavatory basin w/ slow drain; selected valve, control, and plumbing; and inline thermostatic mixing valve; with anchoring through the heavy gauge steel backplate (anchoring hardware and adequate backing by others). The rounded lavatory has been thoughtfully designed to minimize potential ligature points. All connections between the outside plumbing and the ASWLDR-1922-DMF behavioral healthcare lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached w/ security screws allows access to all fixture plumbing and mounting points inside. -
Ligature-resistant, rear mounted, wall outlet, floor mounted, blowout series toilet
The Willoughby ASETW-1490-FM Ligature-resistant, rear mounted, wall outlet, floor mounted, blowout series toilet is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETW-1490-FM fixtures come with an elongated blowout toilet bowl and standard 6-point floor mounting (4 in-wall, 2 in-floor). It has been thoughtfully designed to minimize potential ligature points. The ASETW-1490-FM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures*) of the vandal-resistant, stainless steel toilet. The ASETW-1490-FM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETW-1490-FM with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Stainless Steel Single Person Front Mounted Ligature-resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby ASUW-1314-HEU-FA Stainless Steel Single Person Front Mounted Ligature-resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard ASUW-1314-HEU-FA fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, with anchoring through the included Z-clip and front mounting flanges (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASUW-1314-HEU-FA urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within ot at the rear of the vandal-resistant, stainless steel urinal. A removable access panel attached w/ security screws allows access to all fixture plumbing inside. The ASUW-1314-HEU-FA urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Single Person Rear Mounted Ligature-resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby ASUW-1314-HEU Stainless Steel Single Person Rear Mounted Ligature-resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard ASUW-1314-HEU fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, and standard 4-point mounting. It has been thoughtfully designed to minimize potential ligature points. The ASUW-1314-HEU urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel urinal. The ASUW-1314-HEU urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Ligature-resistant, front mounted, wall outlet, floor mounted, blowout series toilet
The Willoughby ASETW-1490-FM-FA Ligature-resistant, front mounted, wall outlet, floor mounted, blowout series toilet is a single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETW-1490-FM-FA fixtures come with an elongated blowout toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASETW-1490-FM-FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures*) of the vandal-resistant, stainless steel toilet. The ASETW-1490-FM-FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETW-1490-FM-FA with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
ASFVC Ligature-resistant Flush Valve Cover
The Willoughby ASFVC Ligature-resistant Flush Valve Cover is a fabricated 14 gauge, Type 304 stainless steel accessory, designed to conceal exposed top spud toilet plumbing. Stainless steel security screws are typically provided supplied with the sloped-top ASFVC cover, with any needed wall anchors supplied by others. The ASFVC flush valve cover can be specified with any size flush valve actuator hole, and the cover can come in standard #4 stainless steel finish or DC white powder coat finish. -
ASFVCADA Ligature-resistant ADA Compliant Flush Valve Cover
The Willoughby ASFVCADA Ligature-resistant ADA-compliant Flush Valve Cover is a fabricated 14 gauge, Type 304 stainless steel accessory, designed to conceal exposed top spud toilet plumbing while meeting ADA requirements for clear space around toilet compartment grab bars (sold and installed separately). Stainless steel security screws are typically provided supplied with the sloped-top ASFVCADA cover, with any needed wall anchors supplied by others. The flush valve actuator can be mounted on either the left-front or right-front of the cover, with an included hole-cover plate to cover the unused push button hole. The ASFVCADA flush valve cover can be specified with any size flush valve actuator hole, and the cover can come in standard #4 stainless steel finish or DC white powder coat finish. -
18″ Wide Ligature-Resistant Combination Lavatory/Toilet Units
Willoughby 18" Wide Ligature-Resistant Combination Lavatory/Toilet Unit, Series 1806, is a single-user fixture for use in security and behavioral environments with either 45-degree or 90-degree mechanical chases. These combis are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 1806-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, and standard 4-point mounting. It has been thoughtfully designed to minimize potential ligature points. Our Ligature-Resistant Combination Unit can be supplied with a variety of optional features including valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Ligature-resistant, rear mounted, wall outlet, floor mounted, siphon jet series toilet
The Willoughby ASETWS-1490-FM Ligature-resistant, rear mounted, wall outlet, floor mounted, siphon jet series toilet is a single-user fixture for use in security or behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETWS-1490-FM fixtures come with an elongated siphon jet toilet bowl and standard 6-point floor mounting (4 in-wall, 2 in-floor). It has been thoughtfully designed to minimize potential ligature points. The ASETWS-1490-FM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures*) of the vandal-resistant, stainless steel toilet. The ASETWS-1490-FM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETWS-1490-FM with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
18″ Wide Ligature-Resistant Front Access Combination Lavatory/Toilet Unit
Our 18" Ligature-Resistant Combination Unit (1806-FA-Series) is a single-user front access combination lavatory and toilet unit for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. The fixture is designed for surface mounting on either a 45-degree or 90-degree interior wall. This combi is all-welded and fabricated from 14 gauge, T304 stainless steel polished to a #4 satin finish. Standard 1806-FA-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, and holes for 6-point anchor mounting (hardware provided by others). It has been thoughtfully designed to minimize potential ligature points. The 18" Ligature-Resistant Combination Unit can be supplied with a variety of optional features including valves, controls, plumbing, etc., factory-installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. Removable access panels attached w/ security screws will allow access to all fixture plumbing and mounting points inside. -
Ligature-resistant, front mounted, wall outlet, floor mounted, siphon jet series toilet
The Willoughby ASETWS-1490-FM-FA Ligature-resistant, front mounted, wall outlet, floor mounted, siphon jet series toilet is a single-user fixture for use in security or behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETWS-1490- FM-FA fixtures come with an elongated siphon jet toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASETWS-1490- FM-FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures*) of the vandal-resistant, stainless steel toilet. The ASETWS-1490- FM-FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETWS-1490- FM-FA with Top Spud inlet, it is recommended to order an ASFVC- Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
BWLDR-1922 Ligature-resistant Stainless Steel Behavioral Healthcare Bariatric Lavatory
The Willoughby BWLDR-1922 Ligature-resistant Stainless Steel Behavioral Healthcare Bariatric Lavatory is a single-user fixture for vandal-resistant behavioral healthcare environments. This wall-mounted bariatric lavatory accommodates bariatric patients and can withstand a static downward force of 650 lbs. at the front edge of the lavatory with no permanent physical damage). The lavatory has a rounded integral sloped backsplash and rounded integral ligature-resistant side splashes. The fixture is fabricated from 14-gauge, type 304 stainless steel. The construction is welded with removable a trap enclosure. The fixture exterior, including lavatory deck, basin, and trap enclosure, all have an antimicrobial gloss white powder coat enamel finish. A bare stainless steel lavatory basin with satin finish is optional. All connections between the outside plumbing and the BWLDR-1922 behavioral healthcare lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached with security screws allows access to all fixture plumbing and mounting points inside. -
BWLDR-1922-DMF Ligature-resistant Stainless Steel Behavioral Healthcare Bariatric Lavatory
The Willoughby BWLDR-1922-DMF Ligature-resistant Stainless Steel Behavioral Healthcare Bariatric Lavatory is a single-user fixture for vandal-resistant behavioral healthcare environments. This wall-mounted bariatric lavatory accommodates bariatric patients and can withstand a static downward force of 650 lbs. at the front edge of the lavatory with no permanent physical damage). The lavatory has a rounded integral sloped backsplash and rounded integral ligature-resistant side splashes. The fixture is fabricated from 14-gauge, type 304 stainless steel. The construction is welded with removable a trap enclosure. The fixture exterior, including lavatory deck, basin, and trap enclosure, all have an antimicrobial gloss white powder coat enamel finish. A bare stainless steel lavatory basin with satin finish is optional. All connections between the outside plumbing and the BWLDR-1922-DMF behavioral healthcare lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached with security screws allows access to all fixture plumbing and mounting points inside. -
Ligature-resistant, rear mounted, floor outlet, floor mounted, siphon jet series toilet
The Willoughby ASETF-1490-FM Ligature-resistant, rear mounted, floor outlet, floor mounted, siphon jet series toilet is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETF-1490-FM fixtures come with an elongated siphon jet toilet bowl and standard 4-point floor mounting (2 in-wall, 2 in-floor). It has been thoughtfully designed to minimize potential ligature points. The ASETF-1490-FM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location*) of the vandal-resistant, stainless steel toilet. The ASETF-1490-FM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETF-1490-FM with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Stainless Steel Ligature-resistant Rear Mounted Behavioral Drinking Fountain
The Willoughby WBDF-1519-HC Stainless Steel Ligature-resistant, Rear Mounted, Behavioral Drinking Fountain is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBDF-1519- HC fixtures come with a rounded rectangular basin, DMBH ligature-resistant bubbler, Slow drain, EB elbow waste (1-1/2” F.I.P.), and standard 4-point mounting. The sloped top, angular profile drinking fountain has been thoughtfully designed to minimize potential ligature points. The WBDF-1519-HC drinking fountain can be supplied with optional features including: plumbing, mounting guides, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The WBDF-1519- HC drinking fountain fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (installation by others). -
Ligature-resistant, front mounted, floor outlet, floor mounted, siphon jet series toilet
The Willoughby ASETF-1490-FM-FA Ligature-resistant, front mounted, floor outlet, floor mounted, siphon jet series toilet is a single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETF-1490-FM-FA fixtures come with an elongated siphon jet toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASETF-1490-FM-FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location*) of the vandal-resistant, stainless steel toilet. The ASETF-1490-FM-FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETF-1490-FM-FA with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Stainless Steel Ligature-resistant Front Mounted Behavioral Drinking Fountain
The Willoughby WBDF-1519-HC-FA Stainless Steel Ligature-resistant, Front Mounted, Behavioral Drinking Fountain is a single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBDF-1519-HC-FA fixtures come with a rounded rectangular basin, DMBH ligature-resistant bubbler, Slow drain, RPT slip-joint P-trap (1-1/2” F.I.P.), with anchoring through the included mounting plate (anchoring hardware by others).The sloped top, angular profile drinking fountain has been thoughtfully designed to minimize potential ligature points. The WBDF-1519-HC-FA drinking fountain can be supplied with optional features including: plumbing, mounting guides, etc. All valves and plumbing will be factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The WBDF-1519-HC-FA drinking fountain fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (installation by others). -
Stainless Steel Ligature-resistant Rear Mounted 18″ Wide Drinking Fountain
The Willoughby ASDF-1013-06 Stainless Steel Ligature-resistant, Rear Mounted, 18” Wide Drinking Fountain is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASDF-1013-06 fixtures come with an oval-shaped basin, DMBH ligature-resistant drinking fountain bubbler, PSL1 single temperature non-metering valve, EB elbow waste (1-1/2” F.I.P.), and standard 4-point mounting. It has been thoughtfully designed to minimize potential ligature points. The ASDF-1013-06 drinking fountain can be supplied with optional features including: plumbing, mounting guides, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless Steel Ligature-resistant Front Mounted 18″ Wide Drinking Fountain
The Willoughby ASDF-1013-06-FA Stainless Steel Ligature-resistant, Front Mounted, 18” Wide Drinking Fountain is a single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASDF-1013-06-FA fixtures come with an oval-shaped basin, DMBH ligature-resistant drinking fountain bubbler, PSL1 single temperature non-metering valve, RPT slip-joint P-trap (1-1/2” F.I.P.), with anchoring through mounting holes (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASDF-1013-06-FA drinking fountain can be supplied with optional features including: plumbing, mounting guides, etc. All valves and plumbing will be factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable access panels attached w/ security screws allow access to all fixture plumbing and mounting points inside. -
ASUFVC Ligature-resistant Urinal Flush Valve Cover
The Willoughby ASUFVC Ligature-resistant Urinal Flush Valve (Urinal Valve) Cover is a fabricated 14 gauge, Type 304 stainless steel accessory, designed to conceal exposed top spud urinal plumbing. Stainless steel security screws are typically provided supplied with the sloped-top- and-bottom ASUFVC cover, with any needed wall anchors supplied by others. The ASUFVC urinal flush valve cover can be specified with any size flush valve actuator hole, and the cover can come in standard #4 stainless steel finish or DC white powder coat finish. -
49″ Wide Handicap-ADA Combination Lavatory/Toilet Units for use on 90 degree chase wall
Willoughby 49" ADA Combination Unit is a 4896-Series 49" Wide Handicap-ADA Combination Lavatory/Toilet Unit for use on a 90-degree chase wall is an ADA-compliant single-user fixture for use in security and behavioral environments with 90-degree mechanical chases. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 4896-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, an integral grab bar with ligature-resistant closure plate, and standard 6-point mounting. It has been thoughtfully designed to minimize potential ligature points. The 4896-Series Combination fixture can be supplied with a variety of optional features including valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The 4896-Series Combination fixture meets all applicable ADA, UFAS, and ANSI accessibility guidelines; a CBC-compliant model 4896 is also available. -
Stainless Steel 18″ Wide Rear Mounted Ligature-resistant Lavatory
The Willoughby ASHS-1013-06 Stainless Steel 18" Wide Rear Mounted Ligature-resistant Lavatory is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASHS-1013-06 fixtures come with an oval-shaped lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. It has been thoughtfully designed to minimize potential ligature points. The ASHS-1013-06 lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
49″ Wide Handicap-ADA Front Access Combination Lavatory/Toilet Units for use on 90 degree wall
Willoughby 49" Willoughby Combination Unit (4896-FA-Series) is a Handicap-ADA Front Access Combination Lavatory/Toilet Unit for use on a 90-degree wall. This combi is an ADA-compliant single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. The fixture is designed for surface mounting on a 90-degree interior wall. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 4896-FA-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, an integral grab bar with ligature-resistant closure plate, and holes for 5-point anchor mounting (hardware provided by others). It has been thoughtfully designed to minimize potential ligature points. 49" Willoughby Combination Units can be supplied with a variety of optional features including valves, controls, plumbing, etc., factory-installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. Removable access panels attached w/ security screws will allow access to all fixture plumbing and mounting points inside. The 4896-FA-Series Combination fixture meets all applicable ADA, UFAS, and ANSI accessibility guidelines; a CBC-compliant model 4896-FA is also available. -
Stainless Steel 18″ Wide Front Mounted Ligature-resistant Lavatory
The Willoughby ASHS-1013-06-FA Stainless Steel 18" Wide Front Mounted Ligature-resistant Lavatory is a single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASHS-1013-06-FA fixtures come with an oval-shaped lavatory bowl, 1-1/2” F.I.P. slip-joint P-trap, with anchoring through the provided mounting holes (anchoring hardware by others). The ASHS-1013-06-FA lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory-installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable panels attached w/ security screws allow access to all fixture plumbing and mounting points inside. -
ASRTH Series Ligature-Resistant Tissue Holder
The Willoughby ASRTH Recessed Toilet Roll Holder (models: ASRTH1, ASRTH2, and ASRTH3) is a die-formed 14 gauge, Type 304 stainless steel accessory, designed to accommodate a standard roll of toilet tissue. When the ASRTH tissue holder is stocked with a standard-size toilet tissue roll, it becomes nearly impossible to conceal any contraband within the accessory. All mounting hardware or stainless steel security screws are typically provided supplied with the tissue holder, with any needed wall anchors supplied by others. The ASRTH tissue holder is ligature-resistant. -
Stainless Steel Ligature-resistant Rear Mounted Behavioral Lavatory
The Willoughby WBLS-2018-HC Stainless Steel Ligature-resistant Rear Mounted Behavioral Lavatory is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBLS-2018-HC fixtures come with a rectangular-shaped lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The sloped top, angular profile lavatory has been thoughtfully designed to minimize potential ligature points. The WBLS-2018-HC lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The WBLS-2018-HC lavatory fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Ligature-resistant Front Mounted Behavioral Lavatory
The Willoughby WBLS-2018-HC-FA Stainless Steel Ligature-resistant Front Mounted Behavioral Lavatory is a single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBLS-2018- HC-FA fixtures come with an oval-shaped lavatory bowl, 1-1/2” F.I.P. slip-joint P-trap, with anchoring through the back-plate mounting holes (anchoring hardware by others). The sloped top, angular profile lavatory has been thoughtfully designed to minimize potential ligature points. The WBLS-2018- HC-FA lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The WBLS-2018- HC-FA lavatory fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WSSS-ADA Series ADA-Compliant Surgical Scrub Sink
The Willoughby WSSS-ADA Surgical Scrub Sink is a compact, single- or multi-user, stainless steel ADA compliant sink for use in healthcare environments. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, except for the bead-blast finish bowl. Standard WSSS-ADA fixtures come with an angled rectangular-shaped bowl; infrared sensor actuated water valves; inline thermostatic mixing valves; laminar flow gooseneck faucets; machined stainless steel drain assembly; and 1-1/2” F.I.P. slip-joint P-trap. Scrub sinks can be specified in One- (WSSS-ADA -1), Two- (WSSS-ADA -2), or Three-Station (WSSS-ADA -3) configurations. Anchoring is through the included Z-clips and mounting holes, with mounting carriers available as an option (anchoring hardware and adequate backing by others). All connections between the outside plumbing and the WSSS-ADA fixture are made within the stainless steel cabinet, with secure access panels allowing qualified maintenance personnel access to the mechanical equipment. The fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor.