Ligature-Resistant
Showing 1–64 of 67 results
-
LRBHL-2220 Ligature-Resistant Solid Surface, Behavioral Health Lavatory (for Deck Mounted Faucet)
The Willoughby LRBHL-2220 Ligature-Resistant Solid Surface Behavioral Health Lavatory (for Deck Mounted Faucet) is a single-user fixture for vandal-resistant behavioral health environments. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. The rounded lavatory has been thoughtfully designed to minimize potential ligature points. Standard LRBHL-2220 fixtures shall be supplied with ligature-resistant drain and tailpiece. Fixtures with optional LRFC faucet shall be furnished with integral checkstop, flexible supply hoses, control valve, and valve power supply. An optional in-line thermostatic mixing valve is also available. All connections between the outside plumbing and the LRBHL-2220 behavioral health lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, TAS, UFAS, CBC, and ANSI accessibility guidelines when mounted at the correct, applicable rim height above the finished floor. A removable trap cover attached with security screws allows access to all fixture plumbing and mounting points inside. -
LRBCL-2030 Ligature-Resistant Solid Surface, Behavioral Health Corner Lavatory (for Deck Mounted Faucet)
The Willoughby LRBCL-2030 Ligature-Resistant Solid Surface Behavioral Health Corner Lavatory (for Deck Mounted Faucet) is a single-user fixture for vandal-resistant behavioral health environments. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. The rounded lavatory has been thoughtfully designed to minimize potential ligature points. Standard LRBCL-2030 fixtures shall be supplied with ligature-resistant drain and tailpiece. Fixtures with optional LRFC faucet shall be furnished with integral checkstop, flexible supply hoses, control valve, and valve power supply. An optional in-line thermostatic mixing valve is also available. All connections between the outside plumbing and the LRBCL-2030 behavioral health lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, TAS, UFAS, CBC, and ANSI accessibility guidelines when mounted at the correct, applicable rim height above the finished floor. A removable trap cover attached w/ security screws allows access to all fixture plumbing and mounting points inside. -
LRBHL-2320 Ligature-Resistant Solid Surface, Behavioral Health Lavatory
The Willoughby LRBHL-2320 Ligature-Resistant Solid Surface Behavioral Health Lavatory is a single-user fixture for vandal-resistant behavioral health environments. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard LRBHL-2320 fixtures come with a contoured lavatory basin; drain assembly; selected valve, control, and plumbing; and inline thermostatic mixing valve; with anchoring through the pre-assembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). The rounded lavatory has been thoughtfully designed to minimize potential ligature points. All connections between the outside plumbing and the LRBHL-2320 behavioral health lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached with security screws allows access to all fixture plumbing and mounting points inside. -
Stainless Steel Ligature-resistant Rear Mounted Behavioral Lavatory
The Willoughby WBLS-2018-HC Stainless Steel Ligature-resistant Rear Mounted Behavioral Lavatory is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBLS-2018-HC fixtures come with a rectangular-shaped lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The sloped top, angular profile lavatory has been thoughtfully designed to minimize potential ligature points. The WBLS-2018-HC lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The WBLS-2018-HC lavatory fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Ligature-resistant Front Mounted Behavioral Lavatory
The Willoughby WBLS-2018-HC-FA Stainless Steel Ligature-resistant Front Mounted Behavioral Lavatory is a single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBLS-2018- HC-FA fixtures come with an oval-shaped lavatory bowl, 1-1/2” F.I.P. slip-joint P-trap, with anchoring through the back-plate mounting holes (anchoring hardware by others). The sloped top, angular profile lavatory has been thoughtfully designed to minimize potential ligature points. The WBLS-2018- HC-FA lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The WBLS-2018- HC-FA lavatory fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
ASWLDR-1922 Ligature-Resistant Stainless Steel Behavioral Health Lavatory
The Willoughby ASWLDR-1922 Ligature-Resistant Stainless Steel Behavioral Health Lavatory is a single-user fixture for vandal-resistant behavioral health environments. Willoughby stainless steel lavatory fixtures are all-welded, fabricated from T304 stainless steel, polished to a #4 satin finish. Standard ASWLDR-1922 fixtures come with a round lavatory basin with slow drain; selected valve, control, and plumbing; and inline thermostatic mixing valve; with anchoring through the heavy gauge steel backplate (anchoring hardware and adequate backing by others). The rounded lavatory has been thoughtfully designed to minimize potential ligature points. All connections between the outside plumbing and the ASWLDR-1922 behavioral health lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached with security screws allows access to all fixture plumbing and mounting points inside. -
ASWLDR-1922-DMF Ligature-Resistant Stainless Steel Behavioral Health Lavatory
The Willoughby ASWLDR-1922-DMF Ligature-Resistant Stainless Steel Behavioral Health Lavatory is a single-user fixture for vandal-resistant behavioral health environments. Willoughby stainless steel lavatory fixtures are all-welded, fabricated from T304 stainless steel, polished to a #4 satin finish. Standard ASWLDR-1922-DMF fixtures come with a round lavatory basin with slow drain; selected valve, control, and plumbing; and inline thermostatic mixing valve; with anchoring through the heavy gauge steel backplate (anchoring hardware and adequate backing by others). The rounded lavatory has been thoughtfully designed to minimize potential ligature points. All connections between the outside plumbing and the ASWLDR-1922-DMF behavioral health lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached w/ security screws allows access to all fixture plumbing and mounting points inside. -
Stainless Steel 18″ Wide Rear Mounted Ligature-resistant Lavatory
The Willoughby ASHS-1013-06 Stainless Steel 18" Wide Rear Mounted Ligature-resistant Lavatory is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASHS-1013-06 fixtures come with an oval-shaped lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. It has been thoughtfully designed to minimize potential ligature points. The ASHS-1013-06 lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless Steel 18″ Wide Front Mounted Ligature-resistant Lavatory
The Willoughby ASHS-1013-06-FA Stainless Steel 18" Wide Front Mounted Ligature-resistant Lavatory is a single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASHS-1013-06-FA fixtures come with an oval-shaped lavatory bowl, 1-1/2” F.I.P. slip-joint P-trap, with anchoring through the provided mounting holes (anchoring hardware by others). The ASHS-1013-06-FA lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory-installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable panels attached w/ security screws allow access to all fixture plumbing and mounting points inside. -
LRFC Ligature-Resistant Infrared Faucet
The Willoughby LRFC Ligature-Resistant, Infrared Faucet—constructed from cast 304 stainless steel—is recommended for high-use areas where risk accommodations are a concern, such as behavioral and mental health facilities. These faucets feature a contoured design and IR sensor with preset, elapsed time lockouts to minimize vandalism and, with the 4” center set, are ready for new construction projects or retrofitting existing lavatories. The LRFC comes with all the necessary mounting hardware to install on lavatories and provide a water-tight seal, along with a battery-operated or hard-wired valve and power supply. Additionally, there is a serviceable insert—with a spray pattern flow and smart lime cleaning technology—that provides additional protection against vandalism. All faucets offer a 35° angle of spray with a 16° maximum swivel adjustment and a maximum flow rate of 0.5 GPM. -
LRFC-PBH Ligature-Resistant Pneumatic Push Button Faucet
The Willoughby LRFC-PBH Ligature-Resistant, Pneumatic Push Button Faucet—constructed from cast 304 stainless steel—is recommended for high-use areas where risk accommodations are a concern, such as behavioral and mental health facilities. These faucets feature a contoured design to minimize any potential ligature points and, with the 4” center set, are ready for new construction projects or retrofitting existing lavatories. The LRFC-PBH comes with all the necessary mounting hardware to install on lavatories and provide a water-tight seal. Additionally, there is a serviceable insert—with a spray pattern flow and smart lime cleaning technology—that provides additional protection against vandalism. All faucets offer a 35° angle of spray with a 16° maximum swivel adjustment and a maximum flow rate of 0.5 GPM. -
LRFC-PZPB Ligature-Resistant Piezo Electronic Push Button Faucet
The Willoughby LRFC-PZPB Ligature-Resistant, Piezo Electronic Push Button Faucet—constructed from cast 304 stainless steel—is recommended for high-use areas where risk accommodations are a concern, such as behavioral and mental health facilities. These faucets feature a contoured design to minimize any potential ligature points and, with the 4” center set, are ready for new construction projects or retrofitting existing lavatories. The LRFC-PZPB comes with all the necessary mounting hardware to install on lavatories and provide a water-tight seal. Additionally, there is a serviceable insert—with a spray pattern flow and smart lime cleaning technology—that provides additional protection against vandalism. All faucets offer a 35° angle of spray with a 16° maximum swivel adjustment and a maximum flow rate of 0.5 GPM. -
PML-BHF Valve
The Willoughby PML-BHF Lead-Free, Behavioral Health Pneumatic Faucet is a ligature-resistant water control valve for use with plumbing fixtures in security, commercial, and healthcare environments. They are designed to replace existing valves on china and aluminum fixtures without integral bubblers, and can be specified in either Single Temp. (PML1-BHF) or Dual Temp. (PML2-BHF) configuration. Standard PML-BHF valve assemblies are made from components complying with NSF-61, and will typically come with stainless steel push buttons, stainless steel bubbler, pneumatic tubing and fittings, and associated plumbing connections. The valve assembly is designed for operational pressure between 35-70 psi, recommended with a max. operation temperature of 110° Fahrenheit, and supplied with an appropriate flex hose (1/2” F.P.T.) to connect to the operational water supply. Flex hose is supplied standard unless otherwise specified. Both PML1-BHF and PML1-BHF valve assemblies can be supplied with an optional thermostatic mixing valve. A galvanized mounting plate is provided for secure anchoring of the valve assembly (anchoring hardware by others). -
DVLR Ligature-Resistant Diverter Valve
The Willoughby DVLR Ligature-Resistant Diverter Valve Assembly is for use with plumbing fixtures in security, commercial, and healthcare environments. Standard DVLR valve assemblies are chrome-plated, die-cast construction. The valve assembly is designed for operational pressure between 35-70 psi, and the inlet connection is 3/8” P.T.C. and the outlet connections is 3/8” P.T.C. -
TPLR Ligature-Resistant Mixing Valve
The Willoughby TPLR Ligature-Resistant, Temperature and Pressure Mixing Valve Assembly is a self-contained mixing valve for use with plumbing fixtures in security, commercial, and healthcare environments. Standard TPLR valve assemblies are chrome-plated, die-cast construction. The valve assembly is designed for operational pressure between 35-70 psi (90 psi max.), and the inlet connection is 3/8” M.P.T. and the outlet connection is 3/8” M.P.T. -
WBIS-FA Series Front Mounted Built-In Shower
The Willoughby WBIS-FA Front Mounted Built-in Shower is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixture panels are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBIS-FA fixtures come with one selected shower head and one selected valve assembly, with anchoring through the component shower plates (2 plates included, anchoring and adequate backing by others). The WBIS-FA built-in shower can be supplied with a variety of optional features including: valves, controls, plumbing, in-wall accessories, etc. All connections between the outside plumbing and the fixture are made behind the vandal-resistant, stainless steel plates. The WBIS-FA built-in shower components can be installed to meet most ADA accessibility guidelines when mounted at the correct applicable heights above the finished floor (installation by others). -
WBIS-FA-ADA Series ADA-Compliant Front Mounted Built-In Shower
The Willoughby WBIS-FA-ADA Compliant, Front Mounted, Built-in Shower is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Willoughby front mounted shower plates are fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBIS-FA-ADA fixtures come with two selected shower head and one selected valve assembly, with anchoring through the component shower plates (2-3 plates included, anchoring and adequate backing by others). The WBIS-FA-ADA built-in shower can be supplied with a variety of optional features including: valves, controls, plumbing, in-wall accessories, etc. All connections between the outside plumbing and the fixture are made behind the vandal-resistant, stainless steel plates. The WBIS-FA-ADA built-in shower fixture meets all ADA accessibility guidelines when all components are mounted at the correct applicable heights above the finished floor (installation by others). -
WBS Series Ligature-Resistant Surface-Mounted Behavioral Wall Shower
The Willoughby WBS Ligature-Resistant Surface-Mounted Wall Shower is a single-user fixture for use in behavioral health environments with or without an accessible mechanical chase. Sloped-top WBS shower fixtures are fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBS fixtures come with a selected shower head and valve assembly, with anchoring through the included Z-clip and mounting flange (anchoring hardware and adequate backing by others). The WBS shower can be supplied with a variety of optional features including: valves, controls, plumbing, etc., all factory-installed within the shower fixture (unless noted). All connections between the outside plumbing and the fixture are made within the vandal-resistant, stainless steel cabinet. -
WBS-HCA Series Ligature-Resistant Handicap Accessible Surface-Mounted Behavioral Wall Shower
The Willoughby WBS-HCA Ligature-Resistant, Handicap Accessible, Surface-Mounted Wall Shower is a single-user fixture for use in commercial environments without an accessible mechanical chase. Sloped-top WBS-HCA shower fixtures are fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBS-HCA fixtures come with (2) selected shower heads and valve assembly, with anchoring through the included Z-clip and mounting flange (anchoring hardware and adequate backing by others). The WBS-HCA shower can be supplied with a variety of optional features including: valves, controls, plumbing, etc., all factory-installed within the shower fixture (unless noted). All connections between the outside plumbing and the fixture are made within the vandal-resistant, stainless steel cabinet. -
WBS-HCA-WH Series Ligature-Resistant Handicap Accessible Wide Housing Surface-Mounted Behavioral Wall Shower
The Willoughby WBS-HCA-WH Ligature-resistant, Wide Housing, Handicap Accessible, Surface-Mounted Wall Shower is a single-user fixture for use in commercial environments without an accessible mechanical chase. Sloped-top WBS-HCA-WH shower fixtures are fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBS-HCA-WH fixtures come with (2) selected shower heads and valve assembly, with anchoring through the included Z-clip and mounting flange (anchoring hardware and adequate backing by others). The WBS-HCA-WH shower can be supplied with a variety of optional features including: valves, controls, plumbing, etc., all factory-installed within the shower fixture (unless noted). All connections between the outside plumbing and the fixture are made within the vandal-resistant, stainless steel cabinet. -
WBS-ADA-WH Series Ligature-Resistant ADA-Compliant Wide Housing Surface-Mounted Behavioral Wall Shower
The Willoughby WBS-ADA-WH Ligature-Resistant, Wide Housing, ADA-Compliant, Surface-Mounted Wall Shower is a single-user fixture for use in commercial environments without an accessible mechanical chase. Sloped-top WBS-ADA-WH shower fixtures are fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBS-ADA-WH fixtures come with (2) selected shower heads and valve assembly, with anchoring through the included Z-clip and mounting flange (anchoring hardware and adequate backing by others). The WBS-ADA-WH shower can be supplied with a variety of optional features including: valves, controls, plumbing, etc., all factory-installed within the shower fixture (unless noted). All connections between the outside plumbing and the fixture are made within the vandal-resistant, stainless steel cabinet. -
AS-S3060ADA AquaSurf® Solid Surface 30×60 ADA-Compliant Roll-in Shower Base with Integral Rear Trench Drain
The Willoughby AS-S3060ADA AquaSurf® Solid Surface 30x60 ADA-Compliant Roll-in Shower Base, with Integral Rear Trench Drain, is a single-user fixture for use in commercial, healthcare, and other environments. Willoughby AquaSurf® shower bases are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard AS-S3060ADA shower base features include integrally molded underside bracing; sloped, textured floor; integral perimeter flanges, threshold, and curb; heavy gauge stainless steel trench grate; and 2” O.D. no-hub drain. The rear drain is available in Left, Center, or Right configurations. The AS-S3060ADA shower bases can be supplied with optional color-matched, solid surface wall panel components (installation by others) for finishing a complete shower area enclosure. All connections between the outside plumbing and the AS-S3636ADA shower base are made underneath the fixture. -
AS-S3060ADAF AquaSurf® Solid Surface 30×60 ADA-Compliant Roll-in Shower Base with Integral Front Trench Drain
The Willoughby AS-S3060ADAF AquaSurf® Solid Surface 30x60 ADA-Compliant Roll-in Shower Base, with Integral Front Trench Drain, is a single-user fixture for use in commercial, healthcare, and other environments. Willoughby AquaSurf® shower bases are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard AS-S3060ADAF shower base features include integrally molded underside bracing; sloped, textured floor; integral perimeter flanges, threshold, and curb; heavy gauge stainless steel trench grate; and 2” O.D. no-hub drain. The front drain is available in Left, Center, or Right configurations. The AS-S3060ADAF shower bases can be supplied with optional color-matched, solid surface wall panel components (installation by others) for finishing a complete shower area enclosure. All connections between the outside plumbing and the AS-S3060ADAF shower base are made underneath the fixture. -
AS-S3636ADA AquaSurf® Solid Surface 36×36 ADA-Compliant Transfer Shower Base with Integral Rear Trench Drain
The Willoughby AS-S3636ADA AquaSurf® Solid Surface 36x36 ADA-Compliant Transfer Shower Base, with Integral Rear Trench Drain, is a single-user fixture for use in commercial, healthcare, and other environments. Willoughby AquaSurf® shower bases are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard AS-S3636ADA shower base features include integrally molded underside bracing; sloped, textured floor; integral perimeter flanges, threshold, and curb; heavy gauge stainless steel trench grate; and 2” O.D. no-hub drain. The rear drain is available in Left, Center, or Right configurations. The AS-S3636ADA shower bases can be supplied with optional color-matched, solid surface wall panel components (installation by others) for finishing a complete shower area enclosure. All connections between the outside plumbing and the AS-S3636ADA shower base are made underneath the fixture. -
AS-S3636ADAF AquaSurf® Solid Surface 36×36 ADA-Compliant Transfer Shower Base with Integral Front Trench Drain
The Willoughby AS-S3636ADAF AquaSurf® Solid Surface 36x36 ADA-Compliant Transfer Shower Base, with Integral Front Trench Drain, is a single-user fixture for use in commercial, healthcare, and other environments. Willoughby AquaSurf® shower bases are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard AS-S3636ADAF shower base features include integrally molded underside bracing; sloped, textured floor; integral perimeter flanges, threshold, and curb; heavy gauge stainless steel trench grate; and 2” O.D. no-hub drain. The front drain is available in Left, Center, or Right configurations. The AS-S3636ADAF shower bases can be supplied with optional color-matched, solid surface wall panel components (installation by others) for finishing a complete shower area enclosure. All connections between the outside plumbing and the AS-S3636ADAF shower base are made underneath the fixture. -
AS-S36NEO/AS-S42NEO AquaSurf® Solid Surface Corner Shower Base (Angular)
The Willoughby AS-Series AquaSurf® Solid Surface Corner Shower Base is a single-user fixture for use in commercial, healthcare, and other environments. Willoughby AquaSurf® shower bases are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard AS-Series corner shower bases feature integrally molded underside bracing; sloped, textured floor; integral perimeter flanges and threshold; and corner-oriented, 2” O.D. no-hub drain assembly. The AS-Series shower bases can be ordered in 36” x 36” Neo-Angle style (AS-S36NEO), 42” x 42” Neo-Angle style (AS-S42NEO), or 36” x 36” Round style (AS-S36RND). AS-Series shower bases can be supplied with optional color-matched, solid surface wall panel components (installation by others) for finishing a complete shower area enclosure. All connections between the outside plumbing and the AS-Series shower base are made underneath the fixture. -
15″ Wide Ligature-Resistant Combination Lavatory/Toilet Unit
The Willoughby 15" Wide Combination Lavatory/Toilet Unit (1506-Series) is a ligature-resistant single-user fixture for use in security and behavioral environments with either 45-degree or 90-degree mechanical chases. These combis are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 1506-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, and standard 4-point mounting. It has been thoughtfully designed to minimize potential ligature points. Our Ligature-Resistant Combination Unit can be supplied with a variety of optional features including valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
AS-S36RND AquaSurf® Solid Surface Corner Shower Base (Round)
The Willoughby AS-Series AquaSurf® Solid Surface Corner Shower Base is a single-user fixture for use in commercial, healthcare, and other environments. Willoughby AquaSurf® shower bases are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard AS-Series corner shower bases feature integrally molded underside bracing; sloped, textured floor; integral perimeter flanges and threshold; and corner-oriented, 2” O.D. no-hub drain assembly. The AS-Series shower bases can be ordered in 36” x 36” Neo-Angle style (AS-S36NEO), 42” x 42” Neo-Angle style (AS-S42NEO), or 36” x 36” Round style (AS-S36RND). AS-Series shower bases can be supplied with optional color-matched, solid surface wall panel components (installation by others) for finishing a complete shower area enclosure. All connections between the outside plumbing and the AS-Series shower base are made underneath the fixture. -
AS-S3636/3648/3660 AquaSurf® Solid Surface Curbed Shower Base (Square & Rectangular)
The Willoughby AS-Series AquaSurf® Solid Surface Square/Rectangular Shower Base is a single-user fixture for use in commercial, healthcare, and other environments. Willoughby AquaSurf® shower bases are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard AS-Series shower bases feature integrally molded underside bracing; sloped, textured floor; integral perimeter flanges and threshold; and centered, 2” O.D. no-hub drain assembly. The AS-Series shower bases can be ordered in 36” x 36” (AS-S3636), 36” x 48” (AS-S3648), or 36” x 60” (AS-S3660)—all with square or rectangular profiles. AS-Series shower bases can be supplied with optional color-matched, solid surface wall panel components (installation by others) for finishing a complete shower area enclosure. All connections between the outside plumbing and the AS-Series shower base are made underneath the fixture. -
CSH Ligature-Resistant Vandal Resistant Shower Head
Willoughby model CSH Ligature-Resistant Vandal Resistant Shower Head shall be fixed type, constructed of Type 303 stainless steel, mounted from the rear with no visible fasteners, and shall have a 30° angle of spray through a Delrin insert, retained by a stainless steel Pin-Torx security screw. The head shall have 3/8" F.I.P. threads on the inlet. The entire unit has a ligature-resistant rounded and tapered design. -
LRSH Ligature-Resistant High-Efficiency Shower Head
Willoughby model LRSH Ligature-Resistant, High-Efficiency Shower Head shall be fixed type, with chrome-plated, die-cast construction. The vandal-resistant shower head shall be rear-mounted with no visible fasteners. The shower head shall have a 30° angle of spray with a standard 1.5 GPM flow rate, WaterSense-labeled insert. Optional 2.0 GPM flow rate, WaterSense-labeled insert—as well as a 14° swivel angle head and front mounted plate—available. The inlet connection shall be threaded for 3/8″ F.I.P. The LRSH has a rounded and tapered design to minimize any potential ligature points and shall meet the requirements of cNSF®us ASME A112.18.1 / CSA B125.1 U.P. -
LRCMSH Ligature-Resistant Ceiling Mounted Shower Head
Willoughby model LRCMSH Ligature-Resistant Ceiling Mounted Shower Head shall be fixed type, constructed of Type 303 stainless steel, and be mounted on a removable, vandal-resistant plate. The vandal-resistant shower head shall have a 30° angle of spray, with a standard 1.5 GPM flow rate or an optional 2.0 GPM flow rate. The entire unit has a ligature-resistant rounded, tapered design and utilizes a WaterSense-labeled insert. -
LRFX Ligature-Resistant Quick Disconnect Hand-Held Shower
Willoughby model LRFX Ligature-Resistant Quick Disconnect with Hand-Held Shower shall be fixed type, with a chrome-plated, die-cast construction base and a ligature-resistant quick disconnect hand-held shower head. The shower head shall be rear-mounted with no visible fasteners. The inlet connection shall be threaded for 3/8″ F.I.P. The LRFX features a 1/4 turn quick disconnect with positive shut-off to stop water flow when the shower head and hose are disconnected. The LRFX base is rounded and tapered to minimize any potential ligature points. The shower head is designed to be disconnected from the base and removed from the shower stall when not in use. -
LRFD Ligature-Resistant Floor Drain with Round Strainer
The Ligature-Resistant, Round Floor Drain (model: LRFD-__-RD-__-__) is fabricated using 7 gauge, Type 304 stainless steel strainers and utilizing an industry standard cast iron drain body. The LRFD Series is designed to provide the solution for in-floor drain applications while maintaining ligature-resistance in security and behavioral environments. -
LRFD Ligature-Resistant Floor Drain with Square Strainer
The Ligature-Resistant, Square Floor Drain (model: LRFD-__-SQ-__-__) is fabricated using 7 gauge, Type 304 stainless steel strainers and utilizing an industry standard cast iron drain body. The LRFD Series is designed to provide the solution for in-floor drain applications while maintaining ligature-resistance in security and behavioral environments. -
LRTD Series Ligature-Resistant Recessed Trench Floor Drain
The LRTD Series Ligature-Resistant Recessed Trench Floor Drain is fabricated using 14 gauge stainless steel, with a 14 gauge ligature-resistant drain cover polished to a satin finish. The LRTD Series is designed to provide the solution for in-floor drain applications while maintaining ligature-resistance in security and behavioral environments. -
Stainless Steel Rear-Mounted Heavy-Duty Ligature-Resistant Bottle Filler
The Willoughby WBF-1RM Series stainless steel rear-mounted heavy-duty quick-fill bottle filler provides convenience and helps to reduce the waste from plastic water bottles in institutional and behavioral areas where vandalism or aggressive use is a concern. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. The filler spout shall be activated by a recessed mounted solid stainless steel pushbutton assembly which controls a lead-free, self-closing valve. Pushbutton operation shall require less than 5 lbs. of force. Flow controls (1.0 GPM) are used to ensure adequate flow without being wasteful. Model WBF-1RM bottle filler shall be lead-free and in compliance with ANSI/NSF 61, Section 9 requirements. -
Stainless Steel Recessed Front Mounted Heavy-Duty Ligature-Resistant Bottle Filler
The Willoughby WBF-1RFM Series stainless steel recessed front mounted heavy-duty quick-fill bottle filler provides convenience and helps to reduce the waste from plastic water bottles in institutional and behavioral areas where vandalism or aggressive use is a concern. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish with a removable bottom panel. The filler spout shall be activated by a recessed mounted solid stainless steel pushbutton assembly which controls a lead-free, self-closing valve. Pushbutton operation shall require less than 5 lbs. of force. Flow controls (1.0 GPM) are used to ensure adequate flow without being wasteful. Model WBF-1RFM bottle filler shall be lead-free and in compliance with ANSI/NSF 61, Section 9 requirements. -
Stainless Steel Surface-Mounted Heavy-Duty Ligature-Resistant Bottle Filler
The Willoughby WBF-1SM Series Stainless Steel surface-mounted heavy-duty quick-fill bottle filler provides convenience and helps to reduce the waste from plastic water bottles in institutional and behavioral areas where vandalism or aggressive use is a concern. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish with a removable bottom panel. The filler spout shall be activated by a recessed mounted solid stainless steel pushbutton assembly which controls a lead-free, self-closing valve. Pushbutton operation shall require less than 5 lbs. of force. Flow controls (1.0 GPM) are used to ensure adequate flow without being wasteful. Model WBF-1SM bottle filler shall be lead-free and in compliance with ANSI/NSF 61, Section 9 requirements. -
Stainless Steel Ligature-resistant Rear Mounted Behavioral Drinking Fountain
The Willoughby WBDF-1519-HC Stainless Steel Ligature-resistant, Rear Mounted, Behavioral Drinking Fountain is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBDF-1519- HC fixtures come with a rounded rectangular basin, DMBH ligature-resistant bubbler, Slow drain, EB elbow waste (1-1/2” F.I.P.), and standard 4-point mounting. The sloped top, angular profile drinking fountain has been thoughtfully designed to minimize potential ligature points. The WBDF-1519-HC drinking fountain can be supplied with optional features including: plumbing, mounting guides, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The WBDF-1519- HC drinking fountain fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (installation by others). -
Stainless Steel Ligature-resistant Front Mounted Behavioral Drinking Fountain
The Willoughby WBDF-1519-HC-FA Stainless Steel Ligature-resistant, Front Mounted, Behavioral Drinking Fountain is a single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBDF-1519-HC-FA fixtures come with a rounded rectangular basin, DMBH ligature-resistant bubbler, Slow drain, RPT slip-joint P-trap (1-1/2” F.I.P.), with anchoring through the included mounting plate (anchoring hardware by others).The sloped top, angular profile drinking fountain has been thoughtfully designed to minimize potential ligature points. The WBDF-1519-HC-FA drinking fountain can be supplied with optional features including: plumbing, mounting guides, etc. All valves and plumbing will be factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The WBDF-1519-HC-FA drinking fountain fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (installation by others). -
Stainless Steel Ligature-resistant Rear Mounted 18″ Wide Drinking Fountain
The Willoughby ASDF-1013-06 Stainless Steel Ligature-resistant, Rear Mounted, 18” Wide Drinking Fountain is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASDF-1013-06 fixtures come with an oval-shaped basin, DMBH ligature-resistant drinking fountain bubbler, PSL1 single temperature non-metering valve, EB elbow waste (1-1/2” F.I.P.), and standard 4-point mounting. It has been thoughtfully designed to minimize potential ligature points. The ASDF-1013-06 drinking fountain can be supplied with optional features including: plumbing, mounting guides, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless Steel Ligature-resistant Front Mounted 18″ Wide Drinking Fountain
The Willoughby ASDF-1013-06-FA Stainless Steel Ligature-resistant, Front Mounted, 18” Wide Drinking Fountain is a single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASDF-1013-06-FA fixtures come with an oval-shaped basin, DMBH ligature-resistant drinking fountain bubbler, PSL1 single temperature non-metering valve, RPT slip-joint P-trap (1-1/2” F.I.P.), with anchoring through mounting holes (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASDF-1013-06-FA drinking fountain can be supplied with optional features including: plumbing, mounting guides, etc. All valves and plumbing will be factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable access panels attached w/ security screws allow access to all fixture plumbing and mounting points inside. -
ASFVC Ligature-Resistant Flush Valve Cover
The Willoughby ASFVC Ligature-Resistant Flush Valve Cover is a fabricated 14 gauge, Type 304 stainless steel accessory, designed to conceal exposed top spud toilet plumbing. Stainless steel security screws are typically provided supplied with the sloped-top ASFVC cover, with any needed wall anchors supplied by others. The ASFVC flush valve cover can be specified with any size flush valve actuator hole, and the cover can come in standard #4 stainless steel finish or DC white powder coat finish. -
ASFVC-ADA Ligature-Resistant ADA Compliant Flush Valve Cover
The Willoughby ASFVC-ADA Ligature-Resistant ADA-compliant Flush Valve Cover is a fabricated 14 gauge, Type 304 stainless steel accessory, designed to conceal exposed top spud toilet plumbing while meeting ADA requirements for clear space around toilet compartment grab bars (sold and installed separately). Stainless steel security screws are typically provided supplied with the sloped-top ASFVC-ADA cover, with any needed wall anchors supplied by others. The flush valve actuator can be mounted on either the left-front or right-front of the cover, with an included hole-cover plate to cover the unused push button hole. The ASFVC-ADA flush valve cover can be specified with any size flush valve actuator hole, and the cover can come in standard #4 stainless steel finish or DC white powder coat finish. -
LRFVC-ADA Ligature-Resistant ADA Compliant Flush Valve Cover
The Willoughby LRFVC-ADA Ligature-Resistant ADA-compliant Flush Valve Cover is a fabricated 14 gauge, Type 304 stainless steel accessory, designed to conceal exposed top spud toilet plumbing while meeting ADA requirements for clear space around toilet compartment grab bars (sold and installed separately). Stainless steel security screws are typically provided supplied with the sloped-top LRFVC-ADA cover, with any needed wall anchors supplied by others. The flush valve actuator can be mounted on either the left-front or right-front of the cover, with an included hole-cover plate to cover the unused push button hole. The LRFVC-ADA flush valve cover can be specified with any size flush valve actuator hole, and the cover can come in standard #4 stainless steel finish or DC white powder coat finish. -
ASUFVC Ligature-Resistant Urinal Flush Valve Cover
The Willoughby ASUFVC Ligature-Resistant Urinal Flush Valve (Urinal Valve) Cover is a fabricated 14 gauge, Type 304 stainless steel accessory, designed to conceal exposed top spud urinal plumbing. Stainless steel security screws are typically provided supplied with the sloped-top- and-bottom ASUFVC cover, with any needed wall anchors supplied by others. The ASUFVC urinal flush valve cover can be specified with any size flush valve actuator hole, and the cover can come in standard #4 stainless steel finish or DC white powder coat finish. -
ASGB Series Ligature-Resistant Grab Bars
The Willoughby ASGB Series of ligature-resistant grab bars (models: ASGB__) are fabricated from Type 304 stainless steel. This accessory is designed to provide a wall-mounted gripping surface while maintaining ligature-resistance in security and behavioral environments. Grab bars can be specified in several lengths ranging from 18” to 48”, with exposed mounting flanges standard. -
LRGB Series Ligature-Resistant Grab Bars
The Willoughby LRGB Series of ligature-resistant, ADA compliant grab bars (models: LRGB-__-ADA) are fabricated from Type 304 stainless steel. This accessory is designed to provide a wall-mounted gripping surface while maintaining ligature-resistance in security and behavioral environments. Grab bars can be specified in several lengths ranging from 18” to 48”. -
Stainless Steel Ligature-Resistant Towel Hooks
The Willoughby LRTH line of Ligature-Resistant Release Towel Hooks (models: LRTH1 and LRTH4) are fabricated Type 304 stainless steel accessories, designed to provide a ligature-resistant wall-mounted towel holder. The LRTH ligature-resistant towel hooks support light clothing and towels, but will not support heavier objects and will release under pressure. Stainless steel security screws are typically provided supplied with the sloped top LRTH hooks, with any needed wall anchors supplied by others. LRTH ligature-resistant release towel hooks can be specified as either 1-hook (LRTH1) or 4-hook (LRTH4). -
Ligature-Resistant Release Towel Hook with Integral Shelf
The Willoughby LRTH4S line of Ligature-resistant Release Towel Hook w/Integral Shelves (models LRTH4S and LRTH4S-FA) feature Type 304 stainless steel hooks and a vandal-resistant design. The release towel hooks on the LRTH4S shelves will support light clothing and towels, but will not support excessively heavy objects. All mounting hardware or stainless steel security screws are typically provided with LRTH4S shelves, with any needed wall anchors supplied by others. LRTH4S release towel hook shelves can be specified in either rear-mounted (LRTH4S) or front-mounted (LRTH4S-FA) configurations. -
MR Series Front Access Security Mirror
The Willoughby MR line of Front Access Security Mirrors (models: MR1 and MR2) are die-formed 16 gauge, Type 304 stainless steel accessories, designed to provide a simple, vandal-resistant alternative to traditional mirrors in a security environment. All MR security mirrors will come with a #8 non-directional mirror finish and stainless steel security screws, with any needed wall anchors supplied by others. MR security mirrors can be specified with an optional EM embedded wall mounting plate. -
18″ Wide Ligature-Resistant Combination Lavatory/Toilet Unit
The Willoughby 18" Wide Combination Lavatory/Toilet Unit (1806-Series) is a ligature-resistant single-user fixture for use in security and behavioral environments with either 45-degree or 90-degree mechanical chases. These combis are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 1806-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, and standard 4-point mounting. It has been thoughtfully designed to minimize potential ligature points. Our Ligature-Resistant Combination Unit can be supplied with a variety of optional features including valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
18″ Wide Ligature-Resistant Front Access Combination Lavatory/Toilet Unit
The Willoughby 18" Wide Combination Lavatory/Toilet Unit (1806-FA-Series) is a ligature-resistant front access single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. The fixture is designed for surface mounting on either a 45-degree or 90-degree interior wall. This combi is all-welded and fabricated from 14 gauge, T304 stainless steel polished to a #4 satin finish. Standard 1806-FA-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, and holes for 6-point anchor mounting (hardware provided by others). It has been thoughtfully designed to minimize potential ligature points. The 18" Ligature-Resistant Combination Unit can be supplied with a variety of optional features including valves, controls, plumbing, etc., factory-installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. Removable access panels attached w/ security screws will allow access to all fixture plumbing and mounting points inside. -
ASRTH Series Ligature-Resistant Tissue Holder
The Willoughby ASRTH Recessed Toilet Roll Holder (models: ASRTH1, ASRTH2, and ASRTH3) is a die-formed 14 gauge, Type 304 stainless steel accessory, designed to accommodate a standard roll of toilet tissue. When the ASRTH tissue holder is stocked with a standard-size toilet tissue roll, it becomes nearly impossible to conceal any contraband within the accessory. All mounting hardware or stainless steel security screws are typically provided supplied with the tissue holder, with any needed wall anchors supplied by others. The ASRTH tissue holder is ligature-resistant. -
RSD Wall Mounted Recessed Soap Dish
The Willoughby RSD line of Recessed Soap Dishes (models: RSD1 and RSD2) are die-formed 16 gauge, Type 304 stainless steel accessories, designed to accommodate a single bar of soap. All mounting hardware or stainless steel security screws are typically provided with the soap dish, with any needed wall anchors supplied by others. RSD soap dishes have wide-radius corners to help reduce residue build-up. -
RS Series Recessed Shelf
The Willoughby RS line of Recessed Shelves (models: RS1 and RS2) are all-welded 16 gauge, Type 304 stainless steel accessories, designed to provide a simple, vandal-resistant storage space. All mounting hardware or stainless steel security screws are typically provided with the recessed shelves, with any needed wall anchors supplied by others. RS recessed shelves can be specified in either rear-mounted or front-mounted configurations. -
49″ Wide ADA-Compliant Ligature-Resistant Combination Lavatory/Toilet Unit for 90° Chase Wall
The Willoughby 49" Wide Combination Lavatory/Toilet Unit (4896-Series) is an ADA-compliant, ligature-resistant, single-user fixture for use in security environments with 90-degree mechanical chases. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 4896-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, an integral grab bar with ligature-resistant closure plate, and standard 6-point mounting. It has been thoughtfully designed to minimize potential ligature points. The 4896-Series Combination fixture can be supplied with a variety of optional features including valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The 4896-Series Combination fixture meets all applicable ADA, UFAS, and ANSI accessibility guidelines; a CBC-compliant model 4896 is also available. -
49″ Wide ADA-Compliant Ligature-Resistant Front Access Combination Lavatory/Toilet Unit for 90° Interior Wall
The Willoughby 49" Wide Combination Lavatory/Toilet Unit (4896-FA-Series) is an ADA-compliant, ligature-resistant, front access single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. The fixture is designed for surface mounting on a 90-degree interior wall. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 4896-FA-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, an integral grab bar with ligature-resistant closure plate, and holes for 5-point anchor mounting (hardware provided by others). It has been thoughtfully designed to minimize potential ligature points. 49" Willoughby Combination Units can be supplied with a variety of optional features including valves, controls, plumbing, etc., factory-installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. Removable access panels attached w/ security screws will allow access to all fixture plumbing and mounting points inside. The 4896-FA-Series Combination fixture meets all applicable ADA, UFAS, and ANSI accessibility guidelines; a CBC-compliant model 4896-FA is also available. -
Ligature-Resistant, Rear Mounted, Wall Outlet, Floor Mounted, Blowout Series Toilet
The Willoughby ASETW-1490-FM ligature-resistant, rear mounted, wall outlet, floor mounted, blowout series toilet is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETW-1490-FM fixtures come with an elongated blowout toilet bowl and standard 6-point floor mounting (4 in-wall, 2 in-floor). It has been thoughtfully designed to minimize potential ligature points. The ASETW-1490-FM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures*) of the vandal-resistant, stainless steel toilet. The ASETW-1490-FM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETW-1490-FM with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Ligature-Resistant, Front Mounted, Wall Outlet, Floor Mounted, Blowout Series Toilet
The Willoughby ASETW-1490-FM-FA ligature-resistant, front mounted, wall outlet, floor mounted, blowout series toilet is a single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETW-1490-FM-FA fixtures come with an elongated blowout toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASETW-1490-FM-FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures*) of the vandal-resistant, stainless steel toilet. The ASETW-1490-FM-FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETW-1490-FM-FA with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Ligature-Resistant, Rear Mounted, Wall Outlet, Floor Mounted, Siphon Jet Series Toilet
The Willoughby ASETWS-1490-FM ligature-resistant, rear mounted, wall outlet, floor mounted, siphon jet series toilet is a single-user fixture for use in security or behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETWS-1490-FM fixtures come with an elongated siphon jet toilet bowl and standard 6-point floor mounting (4 in-wall, 2 in-floor). It has been thoughtfully designed to minimize potential ligature points. The ASETWS-1490-FM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures*) of the vandal-resistant, stainless steel toilet. The ASETWS-1490-FM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETWS-1490-FM with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Ligature-Resistant, Front Mounted, Wall Outlet, Floor Mounted, Siphon Jet Series Toilet
The Willoughby ASETWS-1490-FM-FA ligature-resistant, front mounted, wall outlet, floor mounted, siphon jet series toilet is a single-user fixture for use in security or behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETWS-1490-FM-FA fixtures come with an elongated siphon jet toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASETWS-1490-FM-FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures*) of the vandal-resistant, stainless steel toilet. The ASETWS-1490-FM-FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETWS-1490-FM-FA with Top Spud inlet, it is recommended to order an ASFVC- Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Ligature-Resistant, Rear Mounted, Floor Outlet, Floor Mounted, Siphon Jet Series Toilet
The Willoughby ASETF-1490-FM ligature-resistant, rear mounted, floor outlet, floor mounted, siphon jet series toilet is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETF-1490-FM fixtures come with an elongated siphon jet toilet bowl and standard 4-point floor mounting (2 in-wall, 2 in-floor). It has been thoughtfully designed to minimize potential ligature points. The ASETF-1490-FM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location*) of the vandal-resistant, stainless steel toilet. The ASETF-1490-FM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETF-1490-FM with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture.
