Products
Showing 193–250 of 250 results
-
49″ Wide ADA-Compliant Ligature-Resistant Combination Lavatory/Toilet Unit for 90° Chase Wall
The Willoughby 49" Wide Combination Lavatory/Toilet Unit (4896-Series) is an ADA-compliant, ligature-resistant, single-user fixture for use in security environments with 90-degree mechanical chases. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 4896-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, an integral grab bar with ligature-resistant closure plate, and standard 6-point mounting. It has been thoughtfully designed to minimize potential ligature points. The 4896-Series Combination fixture can be supplied with a variety of optional features including valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The 4896-Series Combination fixture meets all applicable ADA, UFAS, and ANSI accessibility guidelines; a CBC-compliant model 4896 is also available. -
49″ Wide ADA-Compliant Ligature-Resistant Front Access Combination Lavatory/Toilet Unit for 90° Interior Wall
The Willoughby 49" Wide Combination Lavatory/Toilet Unit (4896-FA-Series) is an ADA-compliant, ligature-resistant, front access single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. The fixture is designed for surface mounting on a 90-degree interior wall. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 4896-FA-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, an integral grab bar with ligature-resistant closure plate, and holes for 5-point anchor mounting (hardware provided by others). It has been thoughtfully designed to minimize potential ligature points. 49" Willoughby Combination Units can be supplied with a variety of optional features including valves, controls, plumbing, etc., factory-installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. Removable access panels attached w/ security screws will allow access to all fixture plumbing and mounting points inside. The 4896-FA-Series Combination fixture meets all applicable ADA, UFAS, and ANSI accessibility guidelines; a CBC-compliant model 4896-FA is also available. -
Ligature-Resistant, Rear Mounted, Wall Outlet, Floor Mounted, Blowout Series Toilet
The Willoughby ASETW-1490-FM ligature-resistant, rear mounted, wall outlet, floor mounted, blowout series toilet is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETW-1490-FM fixtures come with an elongated blowout toilet bowl and standard 6-point floor mounting (4 in-wall, 2 in-floor). It has been thoughtfully designed to minimize potential ligature points. The ASETW-1490-FM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures*) of the vandal-resistant, stainless steel toilet. The ASETW-1490-FM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETW-1490-FM with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Ligature-Resistant, Front Mounted, Wall Outlet, Floor Mounted, Blowout Series Toilet
The Willoughby ASETW-1490-FM-FA ligature-resistant, front mounted, wall outlet, floor mounted, blowout series toilet is a single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETW-1490-FM-FA fixtures come with an elongated blowout toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASETW-1490-FM-FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures*) of the vandal-resistant, stainless steel toilet. The ASETW-1490-FM-FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETW-1490-FM-FA with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Ligature-Resistant, Rear Mounted, Wall Outlet, Floor Mounted, Siphon Jet Series Toilet
The Willoughby ASETWS-1490-FM ligature-resistant, rear mounted, wall outlet, floor mounted, siphon jet series toilet is a single-user fixture for use in security or behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETWS-1490-FM fixtures come with an elongated siphon jet toilet bowl and standard 6-point floor mounting (4 in-wall, 2 in-floor). It has been thoughtfully designed to minimize potential ligature points. The ASETWS-1490-FM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures*) of the vandal-resistant, stainless steel toilet. The ASETWS-1490-FM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETWS-1490-FM with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Ligature-Resistant, Front Mounted, Wall Outlet, Floor Mounted, Siphon Jet Series Toilet
The Willoughby ASETWS-1490-FM-FA ligature-resistant, front mounted, wall outlet, floor mounted, siphon jet series toilet is a single-user fixture for use in security or behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETWS-1490- FM-FA fixtures come with an elongated siphon jet toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASETWS-1490- FM-FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures*) of the vandal-resistant, stainless steel toilet. The ASETWS-1490- FM-FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETWS-1490- FM-FA with Top Spud inlet, it is recommended to order an ASFVC- Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Ligature-Resistant, Rear Mounted, Floor Outlet, Floor Mounted, Siphon Jet Series Toilet
The Willoughby ASETF-1490-FM ligature-resistant, rear mounted, floor outlet, floor mounted, siphon jet series toilet is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETF-1490-FM fixtures come with an elongated siphon jet toilet bowl and standard 4-point floor mounting (2 in-wall, 2 in-floor). It has been thoughtfully designed to minimize potential ligature points. The ASETF-1490-FM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location*) of the vandal-resistant, stainless steel toilet. The ASETF-1490-FM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETF-1490-FM with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Ligature-Resistant, Front Mounted, Floor Outlet, Floor Mounted, Siphon Jet Series Toilet
The Willoughby ASETF-1490-FM-FA ligature-resistant, front mounted, floor outlet, floor mounted, siphon jet series toilet is a single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASETF-1490-FM-FA fixtures come with an elongated siphon jet toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASETF-1490-FM-FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location*) of the vandal-resistant, stainless steel toilet. The ASETF-1490-FM-FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. *When specifying an ASETF-1490-FM-FA with Top Spud inlet, it is recommended to order an ASFVC-Series Flush Valve Cover to help maintain the overall ligature-resistance of the fixture. -
Bariatric, Front Mounted, Floor Outlet, Floor Mounted, Siphon Jet Series Toilet (4-3/8″ Rough-in)
The Willoughby BETF-1490-FM-FA bariatric, front mounted, floor outlet, floor mounted, siphon jet series toilet (4-3/8" rough-in) is a single-user fixture for use in bariatric healthcare environments. Willoughby bariatric toilets are all-welded, fabricated from heavy gauge, Type 304 stainless steel, with an antimicrobial white powder coat finish, and bead-blast finish bowl. Standard BETF-1490-FM-FA fixtures come with an elongated siphon jet toilet bowl, integral contoured seat, full-perimeter toilet skirt w/ access panels, and open front bariatric toilet seat w/ hinged lid. Standard anchoring is through the included floor Z-clip and wall mounting flanges (anchoring hardware and adequate backing by others). The BETF-1490-FM-FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal-resistant, stainless steel toilet. The BETF-1490-FM-FA toilet fixture meets all applicable ADA, CBC, and ANSI accessibility guidelines when equipped with the standard bariatric toilet seat (included with toilet, shipped separately). -
Bariatric, Front Mounted, Floor Outlet, Floor Mounted, Siphon Jet Series Toilet (10″ Rough-in)
The Willoughby BETF-1490-FM-FA-10” bariatric, front mounted, floor outlet, floor mounted, siphon jet series toilet (10" rough-in) is a single-user fixture for use in bariatric healthcare environments. Willoughby bariatric toilets are all-welded, fabricated from heavy gauge, Type 304 stainless steel, with an antimicrobial white powder coat finish, and bead-blast finish bowl. Standard BETF-1490-FM-FA-10” fixtures come with an elongated siphon jet toilet bowl w/ 10” floor rough-in, integral contoured seat, full-perimeter toilet skirt w/ access panels, and open front bariatric toilet seat w/ hinged lid. Standard anchoring is through the included floor Z-clip and wall mounting flanges (anchoring hardware and adequate backing by others). The BETF-1490-FM-FA-10” toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal-resistant, stainless steel toilet. The BETF-1490-FM-FA-10” toilet fixture meets all applicable ADA, CBC, and ANSI accessibility guidelines when equipped with the standard bariatric toilet seat (included with toilet, shipped separately). -
Bariatric, Front Mounted, Floor Outlet, Floor Mounted, Siphon Jet Series Toilet (12″ Rough-in)
The Willoughby BETF-1490-FM-FA-12" bariatric, front mounted, floor outlet, floor mounted, siphon jet series toilet (12" rough-in) is a single-user fixture for use in bariatric healthcare environments. Willoughby bariatric toilets are all-welded, fabricated from heavy gauge, Type 304 stainless steel, with an antimicrobial white powder coat finish, and bead-blast finish bowl. Standard BETF-1490-FM-FA-12” fixtures come with an elongated siphon jet toilet bowl w/ 12” floor rough-in, integral contoured seat, full-perimeter toilet skirt w/ access panels, and open front bariatric toilet seat w/ hinged lid. Standard anchoring is through the included floor Z-clip and wall mounting flanges (anchoring hardware and adequate backing by others). The BETF-1490-FM-FA-12” toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal-resistant, stainless steel toilet. The BETF-1490-FM-FA-12” toilet fixture meets all applicable ADA, CBC, and ANSI accessibility guidelines when equipped with the standard bariatric toilet seat (included with toilet, shipped separately). -
Bariatric, Front Mounted, Wall Outlet, Floor Mounted, Blowout Series Toilet
The Willoughby BETW-1490-FM-FA bariatric, front mounted, wall outlet, floor mounted, blowout series toilet is a single-user fixture for use in bariatric healthcare environments. Willoughby bariatric toilets are all-welded, fabricated from heavy gauge, Type 304 stainless steel, with an antimicrobial white powder coat finish, and bead-blast finish bowl. Standard BETW-1490- FM-FA fixtures come with an elongated blowout toilet bowl, integral contoured seat, full-perimeter toilet skirt w/ access panels, and open front bariatric toilet seat w/ hinged lid. Standard anchoring is through the included floor Z-clip and wall mounting flanges (anchoring hardware and adequate backing by others). The BETW-1490- FM-FA floor mount rear discharge toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet. The BETW-1490- FM-FA toilet fixture meets all applicable ADA, CBC, and ANSI accessibility guidelines when equipped with the standard bariatric toilet seat (included with toilet, shipped separately). -
Bariatric, Front Mounted, Wall Outlet, Floor Mounted, Siphon Jet Series Toilet
The Willoughby BETWS-1490-FM-FA bariatric, front mounted, wall outlet, floor mounted, siphon jet series toilet is a single-user stainless steel toilet with a bariatric toilet seat for use in healthcare environments. Willoughby's bariatric toilet is all-welded and fabricated from heavy gauge, Type 304 stainless steel. It features an antimicrobial white powder coat finish and a bead-blast finish bowl. Every standard BETWS-1490-FM-FA stainless toilet comes with an elongated siphon jet toilet bowl, an integral contoured seat, a full-perimeter toilet skirt w/ access panels, and an open front bariatric toilet seat w/ hinged lid. Standard anchoring is through the included floor Z-clip and wall mounting flanges (anchoring hardware and adequate backing by others). The BETWS-1490-FM-FA toilet can be supplied with a variety of optional features including valves, controls, and plumbing. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet. The BETWS-1490-FM-FA toilet fixture meets all applicable ADA, CBC, and ANSI accessibility guidelines when equipped with the standard bariatric toilet seat (included with toilet, shipped separately). -
Stainless steel, compact, wall outlet, wall mounted, blowout series toilet
The Willoughby ETW‐1490‐ES Stainless steel, compact, wall outlet, wall mounted, blowout series toilet is a single‐user ADA toilet (ADA-compatible) fixture for use in security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW‐1490‐ES fixtures come with an elongated blowout toilet bowl and standard 6‐point mounting. The ETW‐1490‐ES toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear of the vandal‐resistant, stainless steel toilet. The ETW‐1490‐ES toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when mounted at the correct finished toilet seat height. -
Stainless steel, wall outlet, floor mounted, blowout series toilet
The Willoughby ETW-1490-FM Stainless steel, rear mounted, wall outlet, floor mounted, blowout series toilet is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW-1490-FM fixtures come with an elongated blowout toilet bowl and standard 6-point floor mounting (4 in-wall, 2 in-floor). The ETW-1490-FM toilet can be supplied with a variety of optional features (valves, controls, plumbing). All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet. The ETW-1490-FM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. Ready to Order? Willoughby is ready to meet all of your security plumbing supply needs. Start your order today by finding a representative in your area. -
Stainless steel, front mounted, wall outlet, floor mounted, blowout series toilet
The Willoughby ETW‐1490‐FM‐FA Stainless steel, front mounted, wall outlet, floor mounted, blowout series toilet is a single‐user fixture for use in security environments where a mechanical chase is either non‐existent or difficult to access. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW‐1490‐FM‐FA fixtures come with an elongated blowout toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). The ETW‐1490‐FM‐FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETW‐1490‐FM‐FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option. -
Stainless steel, rear mounted, wall outlet, floor mounted, siphon jet series toilet
The Willoughby ETWS‐1490‐FM Stainless steel, rear mounted, wall outlet, floor mounted, siphon jet series toilet is a single‐user floor mounted toilet for use in security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETWS‐1490‐FM fixtures come with an elongated siphon jet toilet bowl and standard 6‐point floor mounting (4 in‐wall, 2 in‐floor). The ETWS‐1490‐FM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETWS‐1490‐FM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option. Ready to Order? Willoughby is ready to meet all of your security plumbing supply needs. Start your order today by finding a representative in your area. -
Stainless steel, front mounted, wall outlet, floor mounted, siphon jet series toilet
The Willoughby ETWS‐1490‐FM‐FA Stainless steel, front mounted, wall outlet, floor mounted, siphon jet series toilet is a single‐user fixture for use in security environments where a mechanical chase is either non‐existent or difficult to access. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETWS‐1490‐FM‐FA jail toilet fixtures come with an elongated siphon jet toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). The ETWS‐1490‐FM‐FA jail toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETWS‐1490‐FM‐FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option. Ready to Order? Willoughby is ready to meet all of your security plumbing supply needs. Start your order today by finding a representative in your area. -
GB Series Grab Bars
The Willoughby GB Series of grab bars (models: GB__) are fabricated from Type 304 stainless steel. This accessory is designed to provide a wall-mounted gripping surface for security environments. Grab bars can be specified in several lengths ranging from 18” to 48”, with exposed mounting flanges standard. -
Stainless Steel 13″ Wide Rear Mounted Corner Lavatory
The Willoughby CS-1013-46 Stainless Steel 13" Rear Mounted Corner Lavatory is a single-user fixture for corner-mounting in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CS-1013-46 fixtures come with a multi-sided lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The CS-1013-46 lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless steel, rear mounted, wall outlet, wall mounted, blowout series toilet
The Willoughby ETW‐1490‐OF Stainless steel, rear mounted, wall outlet, wall mounted, blowout series toilet is a single‐user fixture for use in security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW‐1490‐OF fixtures come with an elongated blowout toilet bowl and standard 4‐point wall mounting. The ETW‐1490‐OF toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETW‐1490‐OF toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when mounted at the correct finished toilet seat height. Ready to Order? Willoughby is ready to meet all of your security plumbing supply needs. Start your order today by finding a representative in your area. -
WICS-2222 ADA-Compliant Infection Control Hand Washing Sink
The Willoughby WICS-2222 ADA-Compliant Infection Control Hand Washing Sink is a single-user fixture designed to minimize the spread of infectious diseases in healthcare environments. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WICS-2222 fixtures come with a deep, sloped sink basin with offset drain and high side-splashes; antimicrobial drain and tailpiece assembly; 1.5 GPM, 4CC, 3-1/2” gooseneck faucet and plumbing; and preassembled stainless steel mounting pedestal with one-piece stainless steel trap cover. Standard anchoring is from the front, through the mounting pedestal (anchoring hardware and adequate backing by others). The infection control sink can be ordered with a variety of optional features, including: alternative faucets, faucet hole drilling (for manufacturer-approved faucets), antimicrobial trap, plumbing, etc. All connections between the outside plumbing and the infection control sink are concealed within the stainless steel pedestal, with a secure access panel attached with security screws allowing access to all fixture plumbing and mounting points inside. The WICS-2222 fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor, and the sink design meets or exceeds the requirements of CSA Z8000 (certified to CSA B45, 5-11 / IAPMO Z124-2011 Harmonized Plumbing Standard). -
Stainless Steel Rear Mounted China Alternative Lavatory
Willoughby CHS-1013-46 Stainless Steel Rear Mounted, China Alternative Lavatories are bathroom sinks for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CHS-1013- 46 fixtures come with a multi-sided lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The CHS-1013- 46 lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless steel, rear mounted, wall outlet, wall mounted, siphon jet series toilet
Willoughby's ETWS‐1490‐OF Stainless steel, rear mounted, wall outlet, wall mounted, siphon jet series toilet are wall hung toilets designed for an institutional, stainless steel bathroom with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETWS‐1490‐OF fixtures come with an elongated siphon jet toilet bowl and standard 4‐point wall mounting. The ETWS‐1490‐OF toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETWS‐1490‐OF toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when mounted at the correct finished toilet seat height. Ready to Order? Willoughby is ready to meet all of your security plumbing supply needs. Start your order today by finding a representative in your area. -
Stainless steel, carrier mounted (3-bolt), wall outlet, blowout series toilet
The Willoughby ETW‐1490‐CM Stainless steel, carrier mounted (3-bolt), wall outlet, blowout series toilet is a single user fixture for use in security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW‐1490‐CM fixtures come with an elongated blowout toilet bowl and standard 3‐bolt blowout carrier mounting. The ETW‐1490‐CM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETW‐1490‐CM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when mounted at the correct finished toilet seat height. Ready to Order? Willoughby is ready to meet all of your security plumbing supply needs. Start your order today by finding a representative in your area. -
FSS Series Folding Shower Seat
The Willoughby FSS-Series Folding Shower Seat is a fabricated heavy-gauge, Type 304 stainless steel accessory, designed to provide wall-mounted seating in showering environments. Typical FSS handicap shower seats will come polished to a #3 stainless steel satin finish, with any needed hardware and wall anchors supplied by others. The seat meets the guidelines for seating in handicapped shower facilities, and can easily be folded up when not in use (seat must be mounted a min. 1” from the wall if used in conjunction with a grab bar above). -
Stainless steel, carrier mounted (4-bolt), wall outlet, siphon jet series toilet
The Willoughby ETWS‐1490‐CM Stainless steel, carrier mounted (4-bolt), wall outlet, siphon jet series toilet is a single‐user fixture for use in security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETWS‐1490‐CM fixtures come with an elongated siphon jet toilet bowl and standard 4‐bolt siphon jet carrier mounting. The ETWS‐1490‐CM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETWS‐1490‐CM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when mounted at the correct finished toilet seat height. Ready to Order? Willoughby is ready to meet all of your security plumbing supply needs. Start your order today by finding a representative in your area. -
WSB-1911 AquaSurf® Solid Surface Shampoo Bowl 18″ Wide
The Willoughby WSB-1911 AquaSurf® 18” Solid Surface Shampoo Bowl is a single-user, barbering fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WSB-1911 fixtures come with a contoured sink bowl with integral neck rest, 3-1/2” O.D. basket strainer drain, and wall mounting bracket. The shampoo bowl can be supplied with an optional faucet kit (WSB-KIT), which includes a single-handle adjustable faucet, hand-held sprayer, and fixture-mounted vacuum breaker. All connections between the outside plumbing and the fixture are made underneath the vandal-resistant fixture, with anchoring through the included wall bracket and mounting holes (anchoring hardware and adequate backing by others). -
WSB-2111 AquaSurf® Solid Surface Shampoo Bowl 22″ Wide
The Willoughby WSB-2111 AquaSurf® 22” Solid Surface Shampoo Bowl is a single-user, barbering fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WSB-2111 fixtures come with a contoured sink bowl with integral neck rest, 3-1/2” O.D. basket strainer drain, and wall mounting bracket. The shampoo bowl can be supplied with an optional faucet kit (WSB-KIT), which includes a single-handle adjustable faucet, hand-held sprayer, and fixture-mounted vacuum breaker. All connections between the outside plumbing and the fixture are made underneath the vandal-resistant fixture, with anchoring through the included wall bracket and mounting holes (anchoring hardware and adequate backing by others). -
WSSS-ADA Series ADA-Compliant Surgical Scrub Sink
The Willoughby WSSS-ADA Surgical Scrub Sink is a compact, single- or multi-user, stainless steel ADA compliant sink for use in healthcare environments. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, except for the bead-blast finish bowl. Standard WSSS-ADA fixtures come with an angled rectangular-shaped bowl; infrared sensor actuated water valves; inline thermostatic mixing valves; laminar flow gooseneck faucets; machined stainless steel drain assembly; and 1-1/2” F.I.P. slip-joint P-trap. Scrub sinks can be specified in One- (WSSS-ADA -1), Two- (WSSS-ADA -2), or Three-Station (WSSS-ADA -3) configurations. Anchoring is through the included Z-clips and mounting holes, with mounting carriers available as an option (anchoring hardware and adequate backing by others). All connections between the outside plumbing and the WSSS-ADA fixture are made within the stainless steel cabinet, with secure access panels allowing qualified maintenance personnel access to the mechanical equipment. The fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Replacement: Stainless Steel 15″ Wide Rear Mounted Lavatory
The Willoughby HS-1013-46-15-RPF Replacement 15” Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-46-15-RPF fixtures come with an oval-shaped lavatory bowl, EB elbow waste (1-1/2” F.I.P.), and standard 4-point mounting. The HS-1013-46-15-RPF replacement lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Replacement: Stainless Steel 18″ Wide Rear Mounted Rectangular Cabinet Lavatory
The Willoughby HS-1013-96-RPF Stainless Steel Replacement 18” Wide Rear Mounted Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-96-RPF fixtures come with an oval-shaped lavatory bowl, EB elbow waste (1-1/2” F.I.P.), and standard 4-point mounting. The HS-1013-96-RPF replacement lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless steel, rear mounted, floor outlet, floor mounted, siphon jet series toilet
The Willoughby ETF-1490-FM Stainless steel, rear mounted, floor outlet, floor mounted, siphon jet series toilet is a single-user fixture designed for security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14-gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETF‐1490‐FM fixtures come with an elongated siphon jet toilet bowl and standard 4‐point floor mounting (2 in‐wall, 2 in‐floor). The ETF-1490-FM stainless steel toilet can be supplied with a a variety of optional features (valves, controls, plumbing, etc.). All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location). This toilet model meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option. Ready to Order? Willoughby is ready to meet all of your security plumbing supply needs. Start your order today by finding a representative in your area. -
WWF-5406/5408 Six and Eight Station Full Round 54″ Stainless Steel Washfountain
The Willoughby WWF-5406/5408 Six / Eight Station, Full Round, 54” Stainless Steel Deep Bowl Washfountain is a floor mounted, multi-user fixture for vandal-resistant commercial use. All WWF-5406/5408 deep bowl washfountain fixtures are fabricated from heavy gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard WWF-5406/5408 fixtures come with an integral, contoured, multi-user basin; drain assemblies; selected valve, controls, and plumbing; solid surface head cover; and stainless steel floor pedestal (anchoring hardware by others). It can be specified in either Six Station (WWF-5406) or Eight Station (WWF-5408) configurations, with an Adult ADA or Junior ADA (JR) rim height. The WWF-5406/5408 washfountain can be supplied with optional liquid soap dispensers and/or telescoping shroud for fixtures with supplies from above (installed by others). All connections between the outside plumbing and the WWF-5406/5408 washfountain are concealed within the stainless steel head kit and pedestal. The fixture meets all applicable ADA and ANSI accessibility guidelines (excluding FO Foot Operated valve models). -
Stainless steel, front mounted, floor outlet, floor mounted, siphon jet series toilet (4-1/4″ Rough-in)
The Willoughby ETF‐1490‐FM‐FA Stainless steel, front mounted, floor outlet, floor mounted, siphon jet series toilet (4-1/4" Rough-in) is a single‐user fixture for use in security environments where a mechanical chase is either non‐existent or difficult to access. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETF‐1490‐FM‐FA fixtures come with an elongated siphon jet toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). The ETF‐1490‐FM‐FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal‐resistant, stainless steel toilet. The ETF‐1490‐FM‐FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option. -
Stainless Steel Single Person Rear Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby UW-1317-HEU Stainless Steel Single Person Rear Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard UW-1317-HEU fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, and standard 4-point mounting. The UW-1317-HEU urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear and top (on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. The UW-1317-HEU urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Single Person Front Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby UW-1317-HEU-FA Stainless Steel Single Person Front Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard UW-1317-HEU-FA fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, with anchoring through the included Z-clip and front mounting flanges (anchoring hardware by others). The UW-1317-HEU-FA urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear and top (on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. A removable access panel attached w/ security screws allows access to all fixture plumbing inside. The UW-1317-HEU-FA urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Single Person Rear Mounted Ligature-resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby ASUW-1314-HEU Stainless Steel Single Person Rear Mounted Ligature-resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard ASUW-1314-HEU fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, and standard 4-point mounting. It has been thoughtfully designed to minimize potential ligature points. The ASUW-1314-HEU urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel urinal. The ASUW-1314-HEU urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Single Person Front Mounted Ligature-resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby ASUW-1314-HEU-FA Stainless Steel Single Person Front Mounted Ligature-resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard ASUW-1314-HEU-FA fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, with anchoring through the included Z-clip and front mounting flanges (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASUW-1314-HEU-FA urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within ot at the rear of the vandal-resistant, stainless steel urinal. A removable access panel attached w/ security screws allows access to all fixture plumbing inside. The ASUW-1314-HEU-FA urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WH-1700 Series Swivel Toilet Patient Care Unit
The Willoughby WH-1700 Series Swivel Toilet Patient Care Unit is a single-user fixture for use in healthcare environments not requiring dedicated water closet fixtures. Standard WH-1700 fixtures come with a modular Type 304 stainless steel cabinet w/ solid polymer doors and panels; AquaSurf® solid surface countertop and lavatory bowl; cabinet-mounted toilet tissue holder; concealed, side-mounted bedpan washer; elongated, siphon jet, swivel toilet; and laminar flow, gooseneck faucet w/ plumbing. Standard mounting is through the floor and the front of the preassembled stainless steel cabinet backplate (anchoring hardware and adequate backing by others). Wall and floor rough-in templates are included with each fixture order. The WH-1700 swivel toilet PCU can be ordered with a variety of optional features including: contrasting color options, alternative faucets and healthcare washers, code-variance- specific plumbing, etc. All connections between the outside plumbing and the WH-1700 swivel toilet PCU are concealed within the stainless steel cabinet, with solid polymer hinged cabinet doors allowing access to the fixture plumbing and accessories within. -
WH-1750 Series Swivel Toilet Patient Care Unit
The Willoughby WH-1750 Series Swivel Medical Toilet (w/ Medical Toilet Seat) is a single-user fixture for use in healthcare environments not requiring dedicated water closet fixtures. Standard WH-1750 fixtures come with a modular Type 304 stainless steel cabinet w/ solid polymer doors and panels; AquaSurf® solid surface countertop and lavatory bowl; cabinet-mounted toilet tissue holder; elongated, siphon jet, swivel toilet; and laminar flow, gooseneck faucet w/ plumbing. Standard mounting is through the floor and the front of the preassembled stainless steel cabinet backplate (anchoring hardware and adequate backing by others). Wall and floor rough-in templates are included with each fixture order. The WH-1750 swivel toilet PCU can be ordered with a variety of optional features including: contrasting color options, alternative faucets and healthcare washers, code-variance- specific plumbing, etc. All connections between the outside plumbing and the WH-1750 swivel toilet PCU are concealed within the stainless steel cabinet, with solid polymer hinged cabinet doors allowing access to the fixture plumbing and accessories within. -
WH-1900 Series Patient Care Unit
The Willoughby WH-1900 Series Patient Care Unit is a single-user fixture for use in healthcare environments with or without dedicated bathroom water closets. Standard WH-1900 fixtures come with a modular Type 304 stainless steel cabinet w/ solid polymer doors and panels; AquaSurf® solid surface countertop and lavatory bowl; cabinet-mounted toilet tissue holder; concealed, side-mounted bedpan washer; elongated siphon jet toilet; and laminar flow gooseneck faucet w/ plumbing. Standard mounting is through the floor and the front of the preassembled stainless steel cabinet backplate (anchoring hardware and adequate backing by others). Wall and floor rough-in templates are included with each fixture order. The WH-1900 patient care unit can be ordered with a variety of optional features including: contrasting color options, alternative faucets, bedpan and dialysis accessories, code-variance- specific plumbing, etc. All connections between the outside plumbing and the WH-1900 patient care unit are concealed within the stainless steel cabinet, with solid polymer hinged cabinet doors allowing access to the fixture plumbing and accessories within. -
WH-1950 Series Patient Care Unit
The Willoughby WH-1950 Series Patient Care Unit is a single-user fixture for use in healthcare environments with or without dedicated bathroom water closets. Standard WH-1950 fixtures come with a modular Type 304 stainless steel cabinet w/ solid polymer doors and panels; AquaSurf® solid surface countertop and lavatory bowl; cabinet-mounted toilet tissue holder; elongated siphon jet toilet; and laminar flow gooseneck faucet w/ plumbing. Standard mounting is through the floor and the front of the preassembled stainless steel cabinet backplate (anchoring hardware and adequate backing by others). Wall and floor rough-in templates are included with each fixture order. The WH-1950 patient care unit can be ordered with a variety of optional features including: contrasting color options, alternative faucets, bedpan and dialysis accessories, code-variance- specific plumbing, etc. All connections between the outside plumbing and the WH-1950 patient care unit are concealed within the stainless steel cabinet, with solid polymer hinged cabinet doors allowing access to the fixture plumbing and accessories within. -
WH-2100 Patient Care Unit
The Willoughby WH-2100 Series Patient Care Unit is a single-user fixture for use in healthcare environments with or without dedicated bathroom water closets. Standard WH-2100 fixtures come with a modular Type 304 stainless steel cabinet w/ solid polymer doors and panels; elongated AquaSurf® solid surface countertop and oval lavatory bowl; cabinet-mounted toilet tissue holder; integral handicap grab bar; concealed, side-mounted bedpan washer; elongated siphon jet toilet; and laminar flow gooseneck faucet w/ plumbing. Standard mounting is through the floor and the front of the wall mounted, preassembled, stainless steel cabinet (anchoring hardware and adequate backing by others). Wall and floor rough-in templates are included with each fixture order. The WH-2100 patient care unit can be ordered with a variety of optional features including: lengthened cabinet (WH-2101 prefix) contrasting color options, alternative faucets, bedpan and dialysis accessories, code-variance- specific plumbing, etc. All connections between the outside plumbing and the WH-2100 patient care unit are concealed within the stainless steel cabinet, with solid polymer hinged cabinet doors allowing access to the fixture plumbing and accessories within. -
WH-2400 Series Handicap-ADA Compliant Patient Care Unit
The Willoughby WH-2400 Series Handicap ADA-Compliant Patient Care Unit is a single-user fixture for use in healthcare environments with or without dedicated bathroom water closets. Standard WH-2400 fixtures come with a modular, ADA-Compliant, Type 304 stainless steel cabinet w/ solid polymer doors and panels; elongated AquaSurf® solid surface countertop and oval lavatory bowl; cabinet-mounted toilet tissue holder; integral handicap-ADA grab bar; concealed, side-mounted bedpan washer; elongated siphon jet toilet; and laminar flow gooseneck faucet w/ plumbing. Standard mounting is through the floor and the front of the wall mounted, preassembled, stainless steel cabinet (anchoring hardware and adequate backing by others). Wall and floor rough-in templates are included with each fixture order. The WH-2400 ADA-compliant patient care unit can be ordered with a variety of optional features including: contrasting color options, alternative faucets, bedpan and dialysis accessories, code-variance- specific plumbing, etc. All connections between the outside plumbing and the WH-2400 ADA-compliant patient care unit are concealed within the stainless steel cabinet, with solid polymer hinged cabinet doors and security panels allowing access to the fixture plumbing and accessories within. -
WH-2800 Patient Care Unit
The Willoughby WH-2800 Series Patient Care Unit is a single-user fixture for use in healthcare environments with or without dedicated bathroom water closets. Standard WH-2800 fixtures come with a modular, compact, Type 304 stainless steel cabinet w/ solid polymer doors and panels; AquaSurf® solid surface countertop and lavatory bowl; cabinet-mounted toilet tissue holder; elongated siphon jet toilet; and laminar flow gooseneck faucet w/ plumbing. Standard mounting is through the floor and the front of the preassembled stainless steel cabinet backplate (anchoring hardware and adequate backing by others). Wall and floor rough-in templates are included with each fixture order. The WH-2800 patient care unit can be ordered with a variety of optional features including: contrasting color options, alternative faucets, bedpan and dialysis accessories, code-variance- specific plumbing, etc. All connections between the outside plumbing and the WH-2800 patient care unit are concealed within the stainless steel cabinet, with solid polymer hinged cabinet doors allowing access to the fixture plumbing and accessories within. -
Replacement: Wall Mounted, Wall Outlet, Combination Lavatory/Toilet Unit for Super Secur A-350
The Willoughby Wall Mounted, Wall Outlet Combination Lavatory/Toilet Unit (ECW-1546-350-RPF) is a single-user replacement fixture for use in security environments with an accessible mechanical chase. Designed as a direct replacement for the discontinued Super Secur A-350. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ECW-1546-350-RPF fixtures come with elongated blowout toilet, multi-sided lavatory, CW2 combined lavatory waste w/ cleanout, GWC gasketed waste connection, and 3-point carrier mounting w/ (2) additional mounting tappings above the lavatory. The ECW-1546-350-RPF replacement combination fixture can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are concealed within the vandal-resistant, stainless steel cabinet. -
Replacement: Floor Mounted, Floor Outlet, Combination Lavatory/Toilet Unit for Super Secur A-150F
The Willoughby Floor Mounted, Floor Outlet Combination Lavatory/Toilet Unit (ECF-1546-150-RPF) is a single-user replacement fixture for use in security environments with an accessible mechanical chase. Designed as a direct replacement for the discontinued Super Secur A-150F. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ECF-1546-150-RPF fixtures come with elongated blowout toilet, oval lavatory, CW2 combined lavatory waste w/ cleanout, GWC gasketed waste connection, and 4-point mounting. The ECF-1546- 150-RPF replacement combination fixture can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are concealed within the vandal-resistant, stainless steel cabinet. A removable access panel attached w/ security screws allows access to the gasketed waste connection. -
Replacement: Floor Mounted, Wall Outlet, Combination Lavatory/Toilet Unit for Super Secur A-150
The Willoughby Floor Mounted, Wall Outlet Combination Lavatory/Toilet Unit (ECW-1546-150-RPF) is a single-user replacement fixture for use in security environments with an accessible mechanical chase. Designed as a direct replacement for the discontinued Super Secur A-150. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ECW-1546- 150-RPF fixtures come with elongated blowout toilet, oval lavatory, CW2 combined lavatory waste w/ cleanout, GWC gasketed waste connection, and 4-point mounting. The ECW-1546- 150-RPF replacement combination fixture can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are concealed within the vandal-resistant, stainless steel cabinet. -
Replacement: Stainless Steel, Front Mounted, Floor Outlet, Floor Mounted, Siphon Jet Series Toilet (10″ Rough-in)
The Willoughby ETF‐1490‐FM‐10-FA Stainless steel, front mounted, floor outlet, floor mounted, siphon jet series toilet (10" Rough-in) is a single‐user fixture for use in security environments where a mechanical chase is either non‐existent or difficult to access. Fixtures are all‐welded, fabricated from 14-gauge, Type 304 stainless steel polished to a #4 satin finish. The toilet can be anchored through the front and floor mounting flanges (anchoring hardware by others). All connections between the water closet and outside plumbing are made at the bottom and rear or top (depending on inlet location). The ETF-1490-FM stainless steel toilet can be supplied with a a variety of optional features (valves, controls, plumbing, etc.). The ETF‐1490‐FM‐10-FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option. -
Replacement: Stainless Steel, Front Mounted, Floor Outlet, Floor Mounted, Siphon Jet Series Toilet (12″ Rough-in)
The Willoughby ETF‐1490‐FM‐12-FA Stainless steel, front mounted, floor outlet, floor mounted, siphon jet series toilet (12" Rough-in) is a single‐user fixture for use in security environments where a mechanical chase is either non‐existent or difficult to access. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETF‐1490‐FM‐12-FA fixtures come with an elongated siphon jet toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). The ETF‐1490‐FM‐12-FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal‐resistant, stainless steel toilet. The ETF‐1490‐FM‐12-FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option. -
Replacement: Stainless Steel, Floor Outlet, Off-Wall Mounted, Siphon Jet Series Toilet
The Willoughby ETF-1490-OW Stainless steel, floor outlet, off-wall mounted, siphon jet series toilet s a single-user fixture for use in security environments without a mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. This rear flush toilet is anchored through the floor mounting flanges (anchoring hardware by others). The ETW‐1490‐ES toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and top of the vandal‐resistant, stainless steel toilet. This toilet model meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option. -
Replacement: Stainless Steel, Wall Outlet, Floor Mounted, Blowout Series Toilet
The Willoughby ETW-1490-FM-RPF Replacement, floor mounted, wall outlet, blowout series toilet is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW-1490-FM-RPF fixtures come with an elongated blowout toilet bowl, GWC gasketed waste connection, and 4-point floor mounting (2 in-wall, 2 in-floor). The ETW-1490-FM-RPF replacement toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet. -
Replacement: Stainless Steel, Rear Mounted, Wall Outlet, Floor Mounted, Siphon Jet Series Toilet
The Willoughby ETWS-1490-FM-RPF Replacement, floor mounted, wall outlet, siphon jet series toilet is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETWS-1490-FM-RPF fixtures come with an elongated siphon jet toilet bowl, GWC gasketed waste connection, and 4-point floor mounting (2 in-wall, 2 in-floor). The ETWS-1490-FM-RPF replacement toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet. -
Replacement: Stainless Steel, Carrier Mounted (3-bolt), Wall Outlet, Blowout Series Toilet
The Willoughby ETW-1490-CM-RPF Replacement, carrier mounted (3-bolt), wall outlet, blowout series toilet is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW-1490-CM-RPF fixtures come with an elongated blowout toilet bowl, GWC gasketed waste connection, and standard 3-bolt blowout carrier mounting. The ETW-1490-CM-RPF replacement toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet. -
Replacement: Stainless Steel, Carrier Mounted (4-bolt), Wall Outlet, Siphon Jet Series Toilet
Willoughby's ETWS-1490-CM-RPF Replacement, carrier mounted (4-bolt), wall outlet, siphon jet series toilet is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETWS-1490-CM-RPF fixtures come with an elongated siphon jet toilet bowl, GWC gasketed waste connection, and standard 4-bolt siphon jet carrier mounting. The ETWS-1490-CM-RPF replacement toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet. -
Detox Toilet
The Willoughby FD‐1400 Detox Toilet is a built‐in fixture for use in security environments that would be unsuitable for a conventional‐style toilet. These can include detoxification cells, safety cells, isolation cells, etc. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard FD‐1400 fixtures come with a 14” dia. round blowout toilet bowl and removable 7 gauge top grate (fastened with security screws). Fixture can be configured with or without a 1” welded perimeter flange, depending on installation. The FD‐1400 toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the vandal‐resistant, stainless steel toilet are concealed. -
Stainless Steel Multi-User Waterless Trough Urinal
The Willoughby WWU-1500 Stainless Steel Multi-User Waterless Trough Urinal is a multi-user fixture for use in security environments where water supplies are not available or desired. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WWU-1500 Series fixtures come with 1-1/2”O.D. x 2”L. drain tailpiece, with anchoring through front mounting holes (anchoring hardware by others). Several trough lengths are available; see Spec Page for details. The WWU-1500-Series urinal can be supplied with an optional, 14 gauge stainless steel backsplash.