Sinks

Showing all 13 results

CES-912 Commercial Hand Sink

Willoughby CES-912 Commercial Hand Sink Units are single-user, stainless steel fixtures for vandal-resistant commercial use. These commercial stainless sink fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CES-912 fixtures come with a rectangular-shaped lavatory bowl, 1-1/2” M.I.P. basket drain, and 4CC faucet holes (faucet by others). All connections between the outside plumbing and the fixture are made underneath the vandal-resistant, stainless steel fixture, with anchoring through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others).
CWMES Series Multiple Station Hand Sink
The Willoughby CWMES-Series Multiple Station Hand Sink is a multi-user, stainless steel fixture for vandal-resistant commercial use. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CWMES-Series fixtures come with a long rectangular-shaped sink bowl, 1-1/2” M.I.P. basket drain, and faucet holes for 2-4 separate stations (verify dimensions, faucets by others). All connections between the outside plumbing and the fixture are made underneath or at the rear of the vandal-resistant, stainless steel fixture, with anchoring through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others).
CWWS Commercial Wall Sink
The Willoughby CWWS-Series Commercial Wall Sink is a multi-user, stainless steel fixture for vandal-resistant commercial use. Fixtures are all-welded, fabricated from 14 gauge and 12 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CWWS-Series fixtures come with a long rectangular-shaped sink bowl, 1-1/2” O.D.support legs, flat strainer drain w/ 4” x 1-1/2” O.D. tailpiece, and faucet holes for 2-5 separate stations (verify dimensions, faucets by others). All connections between the outside plumbing and the fixture are made underneath the vandal-resistant, stainless steel fixture, with anchoring through the included Z-clip and flange mounting holes (anchoring hardware and adequate backing by others).
CWIS Island Sink
Willoughby CWIS-Series Commercial Stainless Steel Sinks are multi-user, stainless steel island sink fixtures for vandal-resistant commercial use. Fixtures are all-welded, fabricated from 14 gauge and 12 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CWIS-Series fixtures come with a long rectangular sink bowl, rectangular faucet head assembly, 1-1/2” O.D. support legs, beehive strainer drain w/ 4” x 2” O.D. tailpiece, and faucet holes for 6 or 8 separate stations (verify dimensions, faucets by others). All connections between the outside plumbing and the CWIS fixture are made underneath the free-standing, vandal-resistant, stainless steel fixture, with anchoring through the support leg flange mounting holes (anchoring hardware by others).
CSS-2419 Commercial Service Sink
The Willoughby CSS-2419 Commercial Service Sink is a single-user, stainless steel fixture for vandal-resistant commercial use. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CSS-2419 fixtures come with a rectangular-shaped deep sink bowl, 1-1/2” M.I.P. basket drain, and faucet holes (verify dimensions, faucet by others). All connections between the outside plumbing and the fixture are made underneath or at the rear of the vandal-resistant, stainless steel fixture, with anchoring through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The CSS-2419 commercial service sink is manufactured to ASME A112.19.3 / CSA B45.4 standards.
CWMS Series Commercial Mop Sink
The Willoughby CWMS Commercial Mop Sink is a stainless steel utility fixture for vandal-resistant commercial use. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CWMS fixtures come with a rectangular-shaped sink bowl (specify dimensions) and a 3” O.D. caulk drain with removable strainer. All plumbing connections and mounting points are underneath the CWMS mop sink (anchoring hardware by others).
CWSSS Series Commercial Surgical Scrub Sink
The Willoughby CWSSS Commercial Surgical Scrub Sink is a single- or multi-user stainless steel fixture for use in healthcare environments. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish, except for the bead-blast finish bowl. Standard CWSSS fixtures come with a deep rectangular-shaped bowl; knee-activated, positive on/off water valves; panel-mounted temperature / pressure-balancing mixing valves; laminar flow gooseneck faucets; machined stainless steel drain assembly; and 1-1/2” F.I.P. slip-joint P-trap. Scrub sinks can be specified in One- (CWSSS-1), Two- (CWSSS-2), or Three-Station (CWSSS-3) configurations. Anchoring is through the included Z-clips and mounting holes, with mounting carriers or floor-mounting bases as available options (anchoring hardware and adequate backing by others). The CWSSS scrub sink can be supplied with a variety of optional features including: alternate valves and controls, mounting carriers/bases, soap dispensers, etc. All connections between the outside plumbing and the CWSSS fixture are made within the stainless steel cabinet, with secure access panels allowing qualified maintenance personnel access to the mechanical equipment.
EWSSS Series Economy Surgical Scrub Sink
The Willoughby EWSSS Economy Surgical Scrub Sink is a compact, single- or multi-user, stainless steel fixture for use in healthcare environments. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, except for the bead-blast finish bowl. Standard EWSSS fixtures come with a deep rectangular-shaped bowl; knee-activated, positive on/off water valves; inline thermostatic mixing valves; laminar flow gooseneck faucets; machined stainless steel drain assembly; and 1-1/2” F.I.P. slip-joint P-trap. Scrub sinks can be specified in One- (EWSSS-1), Two- (EWSSS-2), or Three-Station (EWSSS-3) configurations. Anchoring is through the included Z-clips and mounting holes, with mounting carriers or floor-mounting bases as available options (anchoring hardware and adequate backing by others). The EWSSS scrub sink can be supplied with a variety of optional features including: alternate valves and controls, mounting carriers/bases, soap dispensers, etc. All connections between the outside plumbing and the EWSSS fixture are made within the stainless steel cabinet, with secure access panels allowing qualified maintenance personnel access to the mechanical equipment.
Stainless Steel Rear Mounted Service Sink
The Willoughby Stainless Steel Rear Mounted Service Sink is a utility fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard SS fixtures come with a 10” deep rectangular sink bowl, 2” F.I.P. elbow waste, fast drain with air vent, and standard 6-point mounting for Off-Floor fixtures or 8-point mounting for On-Floor fixtures. The SS service sink can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet.
Stainless Steel Front Mounted Service Sink
The Willoughby SS-FA Stainless Steel Front Mounted Service Sink is a utility fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard SS-FA fixtures come with a 10” deep rectangular sink bowl, 1-1/2” F.I.P. slip-joint P-trap, fast drain with an air vent, with anchoring through the included Z-clip and mounting holes (anchoring hardware by others). The SS-FA service sink can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable access panels attached w/ security screws allow access to all fixture plumbing and mounting points inside.
WAF-3300/3301 AquaFount® Three Station Solid Surface Washfountain
The Willoughby WAF-3300/3301 AquaFount® Three Station Solid Surface Washfountain is a multi-user solid surface fixture for vandal-resistant commercial use. It can be specified in either Floor Mounted (WAF-3300) or Wall Mounted (WAF-3301) configurations, with an Adult or Juvenile (JR) rim height. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-3300/3301 fixtures come with a contoured multi-user lavatory basin; drain grate assembly; selected valve, controls, and plumbing; and preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). The WAF-3300/3301 washfountain can be supplied with optional liquid soap dispensers. All connections between the outside plumbing and the WAF-3300/3301 AquaFount® washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor.
WICS-2222 ADA-Compliant Infection Control Hand Washing Sink
The Willoughby WICS-2222 ADA-Compliant Infection Control Hand Washing Sink is a single-user fixture designed to minimize the spread of infectious diseases in healthcare environments. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WICS-2222 fixtures come with a deep, sloped sink basin with offset drain and high side-splashes; antimicrobial drain and tailpiece assembly; 1.5 GPM, 4CC, 3-1/2” gooseneck faucet and plumbing; and preassembled stainless steel mounting pedestal with one-piece stainless steel trap cover. Standard anchoring is from the front, through the mounting pedestal (anchoring hardware and adequate backing by others). The infection control sink can be ordered with a variety of optional features, including: alternative faucets, faucet hole drilling (for manufacturer-approved faucets), antimicrobial trap, plumbing, etc. All connections between the outside plumbing and the infection control sink are concealed within the stainless steel pedestal, with a secure access panel attached with security screws allowing access to all fixture plumbing and mounting points inside. The WICS-2222 fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor, and the sink design meets or exceeds the requirements of CSA Z8000 (certified to CSA B45, 5-11 / IAPMO Z124-2011 Harmonized Plumbing Standard).
WSSS-ADA Series ADA-Compliant Surgical Scrub Sink
The Willoughby WSSS-ADA Surgical Scrub Sink is a compact, single- or multi-user, stainless steel ADA compliant sink for use in healthcare environments. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, except for the bead-blast finish bowl. Standard WSSS-ADA fixtures come with an angled rectangular-shaped bowl; infrared sensor actuated water valves; inline thermostatic mixing valves; laminar flow gooseneck faucets; machined stainless steel drain assembly; and 1-1/2” F.I.P. slip-joint P-trap. Scrub sinks can be specified in One- (WSSS-ADA -1), Two- (WSSS-ADA -2), or Three-Station (WSSS-ADA -3) configurations. Anchoring is through the included Z-clips and mounting holes, with mounting carriers available as an option (anchoring hardware and adequate backing by others). All connections between the outside plumbing and the WSSS-ADA fixture are made within the stainless steel cabinet, with secure access panels allowing qualified maintenance personnel access to the mechanical equipment. The fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor.