Stainless Steel

Showing 129–157 of 157 results

Stainless steel, front mounted, wall outlet, floor mounted, siphon jet series toilet

The Willoughby ETWS‐1490‐FM‐FA Stainless steel, front mounted, wall outlet, floor mounted, siphon jet series toilet is a single‐user fixture for use in security environments where a mechanical chase is either non‐existent or difficult to access. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETWS‐1490‐FM‐FA jail toilet fixtures come with an elongated siphon jet toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). The ETWS‐1490‐FM‐FA jail toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETWS‐1490‐FM‐FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option.
GB Series Grab Bars
The Willoughby GB Series of grab bars (models: GB__) are fabricated from Type 304 stainless steel. This accessory is designed to provide a wall-mounted gripping surface for security environments. Grab bars can be specified in several lengths ranging from 18” to 48”, with exposed mounting flanges standard.
Stainless Steel 13″ Wide Rear Mounted Corner Lavatory
The Willoughby CS-1013-46 Stainless Steel 13" Rear Mounted Corner Lavatory is a single-user fixture for corner-mounting in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CS-1013-46 fixtures come with a multi-sided lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The CS-1013-46 lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet.
Stainless steel, rear mounted, wall outlet, wall mounted, blowout series toilet
The Willoughby ETW‐1490‐OF Stainless steel, rear mounted, wall outlet, wall mounted, blowout series toilet is a single‐user fixture for use in security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW‐1490‐OF fixtures come with an elongated blowout toilet bowl and standard 4‐point wall mounting. The ETW‐1490‐OF toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETW‐1490‐OF toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when mounted at the correct finished toilet seat height.
Stainless Steel Rear Mounted China Alternative Lavatory
Willoughby CHS-1013-46 Stainless Steel Rear Mounted, China Alternative Lavatories are bathroom sinks for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CHS-1013- 46 fixtures come with a multi-sided lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The CHS-1013- 46 lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet.
Stainless steel, rear mounted, wall outlet, wall mounted, siphon jet series toilet
Willoughby's ETWS‐1490‐OF Stainless steel, rear mounted, wall outlet, wall mounted, siphon jet series toilet are wall hung toilets designed for an institutional, stainless steel bathroom with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETWS‐1490‐OF fixtures come with an elongated siphon jet toilet bowl and standard 4‐point wall mounting. The ETWS‐1490‐OF toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETWS‐1490‐OF toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when mounted at the correct finished toilet seat height.
Stainless steel, carrier mounted (3-bolt), wall outlet, blowout series toilet
The Willoughby ETW‐1490‐CM Stainless steel, carrier mounted (3-bolt), wall outlet, blowout series toilet is a single user fixture for use in security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW‐1490‐CM fixtures come with an elongated blowout toilet bowl and standard 3‐bolt blowout carrier mounting. The ETW‐1490‐CM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETW‐1490‐CM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when mounted at the correct finished toilet seat height.
FSS Series Folding Shower Seat
The Willoughby FSS-Series Folding Shower Seat is a fabricated heavy-gauge, Type 304 stainless steel accessory, designed to provide wall-mounted seating in showering environments. Typical FSS handicap shower seats will come polished to a #3 stainless steel satin finish, with any needed hardware and wall anchors supplied by others. The seat meets the guidelines for seating in handicapped shower facilities, and can easily be folded up when not in use (seat must be mounted a min. 1” from the wall if used in conjunction with a grab bar above).
Stainless steel, carrier mounted (4-bolt), wall outlet, siphon jet series toilet
The Willoughby ETWS‐1490‐CM Stainless steel, carrier mounted (4-bolt), wall outlet, siphon jet series toilet is a single‐user fixture for use in security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETWS‐1490‐CM fixtures come with an elongated siphon jet toilet bowl and standard 4‐bolt siphon jet carrier mounting. The ETWS‐1490‐CM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETWS‐1490‐CM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when mounted at the correct finished toilet seat height.
Replacement: Stainless Steel 15″ Wide Rear Mounted Lavatory
The Willoughby HS-1013-46-15-RPF Replacement 15” Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-46-15-RPF fixtures come with an oval-shaped lavatory bowl, EB elbow waste (1-1/2” F.I.P.), and standard 4-point mounting. The HS-1013-46-15-RPF replacement lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet.
Replacement: Stainless Steel 18″ Wide Rear Mounted Rectangular Cabinet Lavatory
The Willoughby HS-1013-96-RPF Stainless Steel Replacement 18” Wide Rear Mounted Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-96-RPF fixtures come with an oval-shaped lavatory bowl, EB elbow waste (1-1/2” F.I.P.), and standard 4-point mounting. The HS-1013-96-RPF replacement lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet.
Stainless steel, rear mounted, floor outlet, floor mounted, siphon jet series toilet
The Willoughby ETF-1490-FM Stainless steel, rear mounted, floor outlet, floor mounted, siphon jet series toilet is a single-user fixture designed for security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14-gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETF‐1490‐FM fixtures come with an elongated siphon jet toilet bowl and standard 4‐point floor mounting (2 in‐wall, 2 in‐floor). The ETF-1490-FM stainless steel toilet can be supplied with a a variety of optional features (valves, controls, plumbing, etc.). All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location). This toilet model meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option.
WWF-5406/5408 Six and Eight Station Full Round 54″ Stainless Steel Washfountain
The Willoughby WWF-5406/5408 Six / Eight Station, Full Round, 54” Stainless Steel Deep Bowl Washfountain is a floor mounted, multi-user fixture for vandal-resistant commercial use. All WWF-5406/5408 deep bowl washfountain fixtures are fabricated from heavy gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard WWF-5406/5408 fixtures come with an integral, contoured, multi-user basin; drain assemblies; selected valve, controls, and plumbing; solid surface head cover; and stainless steel floor pedestal (anchoring hardware by others). It can be specified in either Six Station (WWF-5406) or Eight Station (WWF-5408) configurations, with an Adult ADA or Junior ADA (JR) rim height. The WWF-5406/5408 washfountain can be supplied with optional liquid soap dispensers and/or telescoping shroud for fixtures with supplies from above (installed by others). All connections between the outside plumbing and the WWF-5406/5408 washfountain are concealed within the stainless steel head kit and pedestal. The fixture meets all applicable ADA and ANSI accessibility guidelines (excluding FO Foot Operated valve models).
Stainless steel, front mounted, floor outlet, floor mounted, siphon jet series toilet (4-1/4″ Rough-in)
The Willoughby ETF‐1490‐FM‐FA Stainless steel, front mounted, floor outlet, floor mounted, siphon jet series toilet (4-1/4" Rough-in) is a single‐user fixture for use in security environments where a mechanical chase is either non‐existent or difficult to access. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETF‐1490‐FM‐FA fixtures come with an elongated siphon jet toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). The ETF‐1490‐FM‐FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal‐resistant, stainless steel toilet. The ETF‐1490‐FM‐FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option.
Stainless Steel Single Person Rear Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby UW-1317-HEU Stainless Steel Single Person Rear Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard UW-1317-HEU fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, and standard 4-point mounting. The UW-1317-HEU urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear and top (on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. The UW-1317-HEU urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor.
Stainless Steel Single Person Front Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby UW-1317-HEU-FA Stainless Steel Single Person Front Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard UW-1317-HEU-FA fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, with anchoring through the included Z-clip and front mounting flanges (anchoring hardware by others). The UW-1317-HEU-FA urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear and top (on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. A removable access panel attached w/ security screws allows access to all fixture plumbing inside. The UW-1317-HEU-FA urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor.
Stainless Steel Single Person Rear Mounted Ligature-Resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby ASUW-1314-HEU Stainless Steel Single Person Rear Mounted Ligature-Resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard ASUW-1314-HEU fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, and standard 4-point mounting. It has been thoughtfully designed to minimize potential ligature points. The ASUW-1314-HEU urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel urinal. The ASUW-1314-HEU urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor.
Stainless Steel Single Person Front Mounted Ligature-resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby ASUW-1314-HEU-FA Stainless Steel Single Person Front Mounted Ligature-resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard ASUW-1314-HEU-FA fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, with anchoring through the included Z-clip and front mounting flanges (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASUW-1314-HEU-FA urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within ot at the rear of the vandal-resistant, stainless steel urinal. A removable access panel attached w/ security screws allows access to all fixture plumbing inside. The ASUW-1314-HEU-FA urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor.
Replacement: Wall Mounted, Wall Outlet, Combination Lavatory/Toilet Unit for Super Secur A-350
The Willoughby Wall Mounted, Wall Outlet Combination Lavatory/Toilet Unit (ECW-1546-350-RPF) is a single-user replacement fixture for use in security environments with an accessible mechanical chase. Designed as a direct replacement for the discontinued Super Secur A-350. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ECW-1546-350-RPF fixtures come with elongated blowout toilet, multi-sided lavatory, CW2 combined lavatory waste w/ cleanout, GWC gasketed waste connection, and 3-point carrier mounting w/ (2) additional mounting tappings above the lavatory. The ECW-1546-350-RPF replacement combination fixture can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are concealed within the vandal-resistant, stainless steel cabinet.
Replacement: Floor Mounted, Floor Outlet, Combination Lavatory/Toilet Unit for Super Secur A-150F
The Willoughby Floor Mounted, Floor Outlet Combination Lavatory/Toilet Unit (ECF-1546-150-RPF) is a single-user replacement fixture for use in security environments with an accessible mechanical chase. Designed as a direct replacement for the discontinued Super Secur A-150F. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ECF-1546-150-RPF fixtures come with elongated blowout toilet, oval lavatory, CW2 combined lavatory waste w/ cleanout, GWC gasketed waste connection, and 4-point mounting. The ECF-1546- 150-RPF replacement combination fixture can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are concealed within the vandal-resistant, stainless steel cabinet. A removable access panel attached w/ security screws allows access to the gasketed waste connection.
Replacement: Floor Mounted, Wall Outlet, Combination Lavatory/Toilet Unit for Super Secur A-150
The Willoughby Floor Mounted, Wall Outlet Combination Lavatory/Toilet Unit (ECW-1546-150-RPF) is a single-user replacement fixture for use in security environments with an accessible mechanical chase. Designed as a direct replacement for the discontinued Super Secur A-150. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ECW-1546- 150-RPF fixtures come with elongated blowout toilet, oval lavatory, CW2 combined lavatory waste w/ cleanout, GWC gasketed waste connection, and 4-point mounting. The ECW-1546- 150-RPF replacement combination fixture can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are concealed within the vandal-resistant, stainless steel cabinet.
Replacement: Stainless Steel, Front Mounted, Floor Outlet, Floor Mounted, Siphon Jet Series Toilet (10″ Rough-in)
The Willoughby ETF‐1490‐FM‐10-FA Stainless steel, front mounted, floor outlet, floor mounted, siphon jet series toilet (10" Rough-in) is a single‐user fixture for use in security environments where a mechanical chase is either non‐existent or difficult to access. Fixtures are all‐welded, fabricated from 14-gauge, Type 304 stainless steel polished to a #4 satin finish. The toilet can be anchored through the front and floor mounting flanges (anchoring hardware by others). All connections between the water closet and outside plumbing are made at the bottom and rear or top (depending on inlet location). The ETF-1490-FM stainless steel toilet can be supplied with a a variety of optional features (valves, controls, plumbing, etc.). The ETF‐1490‐FM‐10-FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option.
Replacement: Stainless Steel, Front Mounted, Floor Outlet, Floor Mounted, Siphon Jet Series Toilet (12″ Rough-in)
The Willoughby ETF‐1490‐FM‐12-FA Stainless steel, front mounted, floor outlet, floor mounted, siphon jet series toilet (12" Rough-in) is a single‐user fixture for use in security environments where a mechanical chase is either non‐existent or difficult to access. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETF‐1490‐FM‐12-FA fixtures come with an elongated siphon jet toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). The ETF‐1490‐FM‐12-FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal‐resistant, stainless steel toilet. The ETF‐1490‐FM‐12-FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option.
Replacement: Stainless Steel, Floor Outlet, Off-Wall Mounted, Siphon Jet Series Toilet
The Willoughby ETF-1490-OW Stainless steel, floor outlet, off-wall mounted, siphon jet series toilet s a single-user fixture for use in security environments without a mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. This rear flush toilet is anchored through the floor mounting flanges (anchoring hardware by others). The ETW‐1490‐ES toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and top of the vandal‐resistant, stainless steel toilet. This toilet model meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option.
Replacement: Stainless Steel, Wall Outlet, Floor Mounted, Blowout Series Toilet
The Willoughby ETW-1490-FM-RPF Replacement, floor mounted, wall outlet, blowout series toilet is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW-1490-FM-RPF fixtures come with an elongated blowout toilet bowl, GWC gasketed waste connection, and 4-point floor mounting (2 in-wall, 2 in-floor). The ETW-1490-FM-RPF replacement toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet.
Replacement: Stainless Steel, Rear Mounted, Wall Outlet, Floor Mounted, Siphon Jet Series Toilet
The Willoughby ETWS-1490-FM-RPF Replacement, floor mounted, wall outlet, siphon jet series toilet is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETWS-1490-FM-RPF fixtures come with an elongated siphon jet toilet bowl, GWC gasketed waste connection, and 4-point floor mounting (2 in-wall, 2 in-floor). The ETWS-1490-FM-RPF replacement toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet.
Replacement: Stainless Steel, Carrier Mounted (3-bolt), Wall Outlet, Blowout Series Toilet
The Willoughby ETW-1490-CM-RPF Replacement, carrier mounted (3-bolt), wall outlet, blowout series toilet is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW-1490-CM-RPF fixtures come with an elongated blowout toilet bowl, GWC gasketed waste connection, and standard 3-bolt blowout carrier mounting. The ETW-1490-CM-RPF replacement toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet.
Replacement: Stainless Steel, Carrier Mounted (4-bolt), Wall Outlet, Siphon Jet Series Toilet
Willoughby's ETWS-1490-CM-RPF Replacement, carrier mounted (4-bolt), wall outlet, siphon jet series toilet is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETWS-1490-CM-RPF fixtures come with an elongated siphon jet toilet bowl, GWC gasketed waste connection, and standard 4-bolt siphon jet carrier mounting. The ETWS-1490-CM-RPF replacement toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet.
Detox Toilet
The Willoughby FD‐1400 Detox Toilet is a built‐in fixture for use in security environments that would be unsuitable for a conventional‐style toilet. These can include detoxification cells, safety cells, isolation cells, etc. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard FD‐1400 fixtures come with a 14” dia. round blowout toilet bowl and removable 7 gauge top grate (fastened with security screws). Fixture can be configured with or without a 1” welded perimeter flange, depending on installation. The FD‐1400 toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the vandal‐resistant, stainless steel toilet are concealed.