Urinals

Showing all 13 results

Stainless Steel Single Person Front Mounted Washout Flush Straddle Urinal

The Willoughby UW-1412-WO-FA Stainless Steel Single Person Front Mounted Washout Flush Straddle Urinal is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1412- WO-FA fixtures come with full perimeter flushing rim, 1-1/2” F.I.P. slip-joint P-trap, removable P-trap enclosure, with anchoring through the front flanges anchoring hardware by others). The UW-1412- WO-FA urinal can be supplied with a variety of optional features including: valves controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal-resistant, stainless steel urinal. The UW-1412- WO-FA urinal fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor.
Stainless Steel Single Person Rear Mounted Washout Flush Straddle Urinal
The Willoughby UW-1412-WO Stainless Steel Single Person Rear Mounted Washout Flush Straddle Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1412- WO fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 4-point mounting. The UW-1412- WO urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. The UW-1412- WO urinal fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor.
Stainless Steel Single Person Rear Mounted Blowout Flush Straddle Urinal
The Willoughby UW-1412-BJ Stainless Steel Single Person Rear Mounted Blowout Flush Straddle Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1412- BJ fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 4-point mounting. The UW-1412-BJ urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. The UW-1412-BJ urinal fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor.
Stainless Steel Single Person Front Mounted Washout Flush Trough Urinal
The Willoughby UW-1814-WO-FA Stainless Steel Single Person Front Mounted Washout Flush Trough Urinal is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1814-WO-FA fixtures come with full perimeter flushing rim, 1-1/2” F.I.P. slip-joint P-trap, removable P-trap enclosure, with anchoring through the included Z-clip and front mounting flanges (anchoring hardware by others). The UW-1814-WO-FA urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal-resistant, stainless steel urinal.
Stainless Steel Single Person Rear Mounted Washout Flush Trough Urinal
The Willoughby UW-1814-WO Stainless Steel Single Person Rear Mounted Washout Flush Trough Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1814-WO fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 4-point mounting. The UW-1814-WO urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal.
Stainless Steel Single Person Rear Mounted Blowout Flush Trough Urinal
The Willoughby UW-1814-BJ Stainless Steel Single Person Rear Mounted Blowout Flush Trough Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1814-BJ fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 4-point mounting. The UW-1814-BJ urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal.
Stainless Steel Multi-Person Front Mounted Washout Trough Urinal
The Willoughby UW-1800-FA Stainless Steel Multi-Person Front Mounted Washout Trough Urinal is a multiple-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1800-FA-Series fixtures come with full-length rear flush chamber, 1-1/2”O.D. x 4”L. drain tailpiece, with anchoring through the included Z-clips and front mounting slots (anchoring hardware by others). Several trough lengths are available; see Spec Page for details. The UW-1800-FA-Series urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and top, left, or right side (depending on inlet location) of the vandal-resistant, stainless steel urinal.
Stainless Steel Multi-Person Rear Mounted Washout Trough Urinal
The Willoughby UW-1800 Stainless Steel Multi-Person Rear Mounted Washout Trough Urinal is a multiple-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1800-Series fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 8-point mounting. Several trough lengths are available; see Spec Page for details. The UW-1800-Series urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal.
Stainless Steel Single Person Floor Mounted Stall Urinal
The Willoughby UF-1438 Stainless Steel Single Person Floor Mounted Stall Urinal is a single-user fixture for use in security environments with or without a mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UF-1438 fixtures come with full perimeter flushing rim, 2” caulk waste connection, flat strainer drain, with anchoring through the front flanges (anchoring hardware by others). The UF-1438 urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal-resistant, stainless steel urinal. The UF-1438 urinal fixture meets all applicable ADA and CBC accessibility guidelines.
Stainless Steel Single Person Rear Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby UW-1317-HEU Stainless Steel Single Person Rear Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard UW-1317-HEU fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, and standard 4-point mounting. The UW-1317-HEU urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear and top (on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. The UW-1317-HEU urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor.
Stainless Steel Single Person Front Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby UW-1317-HEU-FA Stainless Steel Single Person Front Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard UW-1317-HEU-FA fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, with anchoring through the included Z-clip and front mounting flanges (anchoring hardware by others). The UW-1317-HEU-FA urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear and top (on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. A removable access panel attached w/ security screws allows access to all fixture plumbing inside. The UW-1317-HEU-FA urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor.
Stainless Steel Single Person Rear Mounted Ligature-Resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby ASUW-1314-HEU Stainless Steel Single Person Rear Mounted Ligature-Resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard ASUW-1314-HEU fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, and standard 4-point mounting. It has been thoughtfully designed to minimize potential ligature points. The ASUW-1314-HEU urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel urinal. The ASUW-1314-HEU urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor.
Stainless Steel Single Person Front Mounted Ligature-resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby ASUW-1314-HEU-FA Stainless Steel Single Person Front Mounted Ligature-resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard ASUW-1314-HEU-FA fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, with anchoring through the included Z-clip and front mounting flanges (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASUW-1314-HEU-FA urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within ot at the rear of the vandal-resistant, stainless steel urinal. A removable access panel attached w/ security screws allows access to all fixture plumbing inside. The ASUW-1314-HEU-FA urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor.