Commercial Products

Showing 65–88 of 88 results

Stainless Steel Small Profile Handicap-ADA Compliant Front Access Drinking Fountain

The Willoughby DF-1812-FA Stainless Steel Small Profile Handicap-ADA Compliant, Front Access Drinking Fountain is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard DF-1812-FA fixtures come with a rounded rectangular basin, CDB drinking fountain bubbler, PSL1 single temperature non-metering valve, RPT slip-joint P-trap (1-1/2” F.I.P.), with anchoring through the included mounting plate (anchoring hardware by others). The DF-1812-FA drinking fountain can be supplied with optional features including: plumbing, mounting guides, etc. All valves and plumbing will be factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The DF-1812-FA drinking fountain meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor (installation by others).
HB Series Hose Box
The Willoughby HB-Series Hose Box is a recessed, stainless steel utility fixture for use in commercial, healthcare, and other environments requiring vandal-resistant plumbing access. HB-Series hose boxes are fabricated from Type 304 stainless steel, polished to a #4 satin finish. Standard hose boxes will include 1/2” nominal brass fittings, inlet screwdriver stops, 1/2” F.I.P. inlets, and 3/4” M.G.H.T. outlets. HB-Series fixtures are available in Dual or Single Temperature; with or without Door; with or without Vacuum Breaker; and with or without Waste Outlet. All plumbing supply connections are made behind the recessed wall box, with anchoring points for the wall box and the flush-mounted flange located inside the box perimeter (anchoring hardware by others).
Stainless Steel Multi-Person Rear Mounted Washout Trough Urinal
The Willoughby UW-1800 Stainless Steel Multi-Person Rear Mounted Washout Trough Urinal is a multiple-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1800-Series fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 8-point mounting. Several trough lengths are available; see Spec Page for details. The UW-1800-Series urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal.
HBBD Series Hose Box with Wall Flange and Boiler Drain Valve
The Willoughby HBBD-Series Boiler Drain Valve Hose Box is a recessed, stainless steel utility fixture for use in commercial, healthcare, and other environments requiring vandal-resistant drain valve access. HBBD-Series hose boxes are fabricated from Type 304 stainless steel, polished to a #4 satin finish. Standard boiler drain valve boxes will include 1/2” nominal brass boiler drain valves, 2” M.I.P. drain, 1/2” F.I.P. inlets, and 3/4” M.G.H.T. outlets. HBBD-Series fixtures are available in Dual or Single Temperature. All plumbing connections are made behind or within the recessed wall box, with anchoring points for the wall box and the flush-mounted flange located inside the box perimeter (anchoring hardware by others).
SB-1823 Stainless Steel Shampoo Bowl
Willoughby SB-1823 Stainless Steel Barber Shampoo Bowls are single-user commercial fixtures for vandal-resistant commercial use. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard SB-1823 fixtures come with a contoured neck rest, contoured sink bowl, 3-1/2” O.D. basket strainer drain, and wall mounting bracket. The SB-1823 stainless steel shampoo bowl can be supplied with an optional faucet kit (WSB-KIT), which includes a single-handle adjustable faucet, hand-held sprayer, and fixture-mounted vacuum breaker. All connections between the outside plumbing and the fixture are made underneath the vandal-resistant, fixture, with anchoring through the included wall bracket and mounting holes (anchoring hardware and adequate backing by others).
WAF-2200/2201 AquaFount® Corner Mounted Two Station Solid Surface Washfountain
The Willoughby WAF-2200/2201 AquaFount® Corner Mounted Two Station Solid Surface Washfountain is a multi-user solid surface fixture for vandal-resistant commercial use. It can be specified in either Floor Mounted (WAF-2200) or Wall Mounted (WAF-2201) configurations, with an Adult or Juvenile (JR) rim height. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-2200/2201 fixtures come with a contoured multi-user lavatory basin; drain grate assembly; selected valve, controls, and plumbing; and preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). The WAF-2200/2201 washfountain can be supplied with an optional liquid soap dispenser. All connections between the outside plumbing and the WAF-2200/2201 AquaFount® Corner Mounted Washfountain are concealed within the stainless steel pedestal. The fixture does not meet ADA, ANSI, and CBC accessibility guidelines.
WAF-3300/3301 AquaFount® Three Station Solid Surface Washfountain
The Willoughby WAF-3300/3301 AquaFount® Three Station Solid Surface Washfountain is a multi-user solid surface fixture for vandal-resistant commercial use. It can be specified in either Floor Mounted (WAF-3300) or Wall Mounted (WAF-3301) configurations, with an Adult or Juvenile (JR) rim height. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-3300/3301 fixtures come with a contoured multi-user lavatory basin; drain grate assembly; selected valve, controls, and plumbing; and preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). The WAF-3300/3301 washfountain can be supplied with optional liquid soap dispensers. All connections between the outside plumbing and the WAF-3300/3301 AquaFount® washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor.
WAF-4400/4401 AquaFount® Four Station Solid Surface Washfountain
The Willoughby WAF-4400/4401 AquaFount® Four Station Solid Surface Washfountain is a multi-user solid surface fixture for vandal-resistant commercial use. It can be specified in either Floor Mounted (WAF-4400) or Wall Mounted (WAF-4401) configurations, with an Adult or Juvenile (JR) rim height. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-4400/4401 fixtures come with a contoured multi-user lavatory basin; drain grate assembly; selected valve, controls, and plumbing; and preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). The WAF-4400/4401 washfountain can be supplied with optional liquid soap dispensers. All connections between the outside plumbing and the WAF-4400/4401 AquaFount® washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor.
WAF-3603 AquaFount® Three Station Half Round 36″ Solid Surface Washfountain
The Willoughby WAF-3603 AquaFount® Three Station, Half Round, 36” Solid Surface Deep Bowl Washfountain is a multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-3603 fixtures come with a contoured multi-user lavatory basin; drain assembly; selected valve, controls, and plumbing; and preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). It can be specified with an Adult ADA or Junior ADA (JR) rim height. The WAF-3603 washfountain can be supplied with optional liquid soap dispensers and/or wall-mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WAF-3603 AquaFount® washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (excluding FO - Foot Operated valve models).
WWF-3603 Three Station Half Round 36″ Stainless Steel Washfountain
The Willoughby WWF-3603 Three Station, Half Round, 36” Stainless Steel Deep Bowl Washfountain is a multi-user fixture for vandal-resistant commercial use. All WWF-3603 deep bowl washfountain fixtures are fabricated from heavy gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard WWF-3603 fixtures come with an integral, contoured, multi-user basin; drain assembly; selected valve, controls, and plumbing; solid surface head cover; and stainless steel mounting pedestal. It can be specified with an Adult ADA or Junior ADA (JR) rim height, with anchoring through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The WWF-3603 washfountain can be supplied with optional liquid soap dispensers and/or wall mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WWF-3603 washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (excluding FLR Floor Mounted and FO Foot Operated valve models).
WWF-4203/4204 Three and Four Station Half Round 42″ Stainless Steel Washfountain
The Willoughby WWF-4203/4204 Three / Four Station, Half Round, 42” Stainless Steel Deep Bowl Washfountain is a multi-user fixture for vandal-resistant commercial use. All WWF-4203/4204 deep bowl washfountain fixtures are fabricated from heavy gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard WWF-4203/4204 fixtures come with an integral, contoured, multi-user basin; drain assembly; selected valve, controls, and plumbing; solid surface head cover; and stainless steel mounting pedestal. It can be specified in either Three Station (WWF-4203) or Four Station (WWF-4204) configurations, with an Adult ADA or Junior ADA (JR) rim height. Anchoring is through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The WWF-4203/4204 washfountain can be supplied with optional liquid soap dispensers and/or wall mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WWF-4203/4204 washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (excluding FLR Floor Mounted and FO Foot Operated valve models).
WAF-5403/5404 AquaFount® Three / Four Station Half Round 54″ Solid Surface Washfountain
The Willoughby WAF-5403/5404 AquaFount® Three / Four Station, Half Round, 54” Solid Surface Deep Bowl Washfountain is a multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-5403/5404 fixtures come with a contoured multi-user lavatory basin; drain assembly; selected valve, controls, and plumbing; and preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). It can be specified in either Three Station (WAF-5403) or Four Station (WAF-5404) configurations, with an Adult ADA or Junior ADA (JR) rim height. The WAF-5403/5404 washfountain can be supplied with optional liquid soap dispensers and/or wall-mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WAF-5403/5404 AquaFount® washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (excluding FO - Foot Operated valve models).
WWF-5403/5404 Three and Four Station Half Round 54″ Stainless Steel Washfountain
The Willoughby WWF-5403/5404 Three / Four Station, Half Round, 54” Stainless Steel Deep Bowl Washfountain is a multi-user fixture for vandal-resistant commercial use. All WWF-5403/5404 deep bowl washfountain fixtures are fabricated from heavy gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard WWF-5403/5404 fixtures come with an integral, contoured, multi-user basin; drain assembly; selected valve, controls, and plumbing; solid surface head cover; and stainless steel mounting pedestal. It can be specified in either Three Station (WWF-5403) or Four Station (WWF-5404) configurations, with an Adult ADA or Junior ADA (JR) rim height. Anchoring is through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The WWF-5403/5404 commercial hand sink can be supplied with optional liquid soap dispensers and/or wall mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WWF-5403/5404 washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (excluding FLR Floor Mounted and FO Foot Operated valve models).
WAF-3606 AquaFount® Six Station Full Round 36″ Solid Surface Washfountain
The Willoughby WAF-3606 AquaFount® Six Station, Full Round, 36” Solid Surface Deep Bowl Washfountain is a floor-mounted, multi-user, solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-3606 fixtures come with a full-round multi-user lavatory basin; drain assemblies; selected valve, controls, and plumbing; and preassembled stainless steel floor pedestal (anchoring hardware by others). It can be specified with an Adult ADA or Junior ADA (JR) rim height. The WAF-3606 washfountain can be supplied with optional liquid soap dispensers and/or telescoping shroud for fixtures with supplies from above (installed by others). All connections between the outside plumbing and the WAF-3606 AquaFount® washfountain are concealed within the stainless steel head kit and pedestal. The fixture has one station that fully meets all applicable ADA and ANSI accessibility guidelines (excluding FO - Foot Operated valve models); the other five stations will comply with most but not all accessibility guidelines.
WWF-3606 Six Station Full Round 36″ Stainless Steel Washfountain
The Willoughby WWF-3606 Six Station, Full Round, 36” Stainless Steel Deep Bowl Washfountain is a floor mounted, multi-user fixture for vandal-resistant commercial use. All WWF-3606 deep bowl washfountain fixtures are fabricated from heavy gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard WWF-3606 fixtures come with an integral, contoured, multi-user basin; drain assemblies; selected valve, controls, and plumbing; solid surface head cover; and stainless steel floor pedestal (anchoring hardware by others). It can be specified with an Adult ADA or Junior ADA (JR) rim height. The WWF-3606 washfountain can be supplied with optional liquid soap dispensers and/or telescoping shroud for fixtures with supplies from above (installed by others). All connections between the outside plumbing and the WWF-3606 washfountain are concealed within the stainless steel head kit and pedestal. The fixture has one station that fully meets all applicable ADA and ANSI accessibility guidelines (excluding FO Foot Operated valve models); the other five stations will comply with most but not all accessibility guidelines.
WWF-4206 Six Station Full Round 42″ Stainless Steel Washfountain
The Willoughby WWF-4206 Six Station, Full Round, 42” Stainless Steel Deep Bowl Washfountain is a floor mounted, multi-user fixture for vandal-resistant commercial use. All WWF-4206 deep bowl washfountain fixtures are fabricated from heavy gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard WWF-4206 fixtures come with an integral, contoured, multi-user basin; drain assemblies; selected valve, controls, and plumbing; solid surface head cover; and stainless steel floor pedestal (anchoring hardware by others). It can be specified with an Adult ADA or Junior ADA (JR) rim height. The WWF-4206 washfountain can be supplied with optional liquid soap dispensers and/or telescoping shroud for fixtures with supplies from above (installed by others). All connections between the outside plumbing and the WWF-4206 washfountain are concealed within the stainless steel head kit and pedestal. The fixture has two stations that fully meet all applicable ADA and ANSI accessibility guidelines (excluding FO Foot Operated valve models); the other four stations will comply with most but not all accessibility guidelines.
WAF-5406/5408 AquaFount® Six / Eight Station Full Round 54″ Solid Surface Washfountain
The Willoughby WAF-5406/5408 AquaFount® Six / Eight Station, Full Round, 54” Solid Surface Deep Bowl Washfountain is a floor-mounted, multi-user, solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-5406/5408 fixtures come with a full-round multi-user lavatory basin; drain assemblies; selected valve, controls, and plumbing; and preassembled stainless steel floor pedestal (anchoring hardware by others). It can be specified in either Six Station (WAF-5406) or Eight Station (WAF-5408) configurations, with an Adult ADA or Junior ADA (JR) rim height. The WAF-5406/5408 washfountain can be supplied with optional liquid soap dispensers and/or telescoping shroud for fixtures with supplies from above (installed by others). All connections between the outside plumbing and the WAF-5406/5408 AquaFount® washfountain are concealed within the stainless steel head kit and pedestal. The fixture meets all applicable ADA and ANSI accessibility guidelines (excluding FO - Foot Operated valve models).
WSB-1911 AquaSurf® Solid Surface Shampoo Bowl 18″ Wide
The Willoughby WSB-1911 AquaSurf® 18” Solid Surface Shampoo Bowl is a single-user, barbering fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WSB-1911 fixtures come with a contoured sink bowl with integral neck rest, 3-1/2” O.D. basket strainer drain, and wall mounting bracket. The shampoo bowl can be supplied with an optional faucet kit (WSB-KIT), which includes a single-handle adjustable faucet, hand-held sprayer, and fixture-mounted vacuum breaker. All connections between the outside plumbing and the fixture are made underneath the vandal-resistant fixture, with anchoring through the included wall bracket and mounting holes (anchoring hardware and adequate backing by others).
WSB-2111 AquaSurf® Solid Surface Shampoo Bowl 22″ Wide
The Willoughby WSB-2111 AquaSurf® 22” Solid Surface Shampoo Bowl is a single-user, barbering fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WSB-2111 fixtures come with a contoured sink bowl with integral neck rest, 3-1/2” O.D. basket strainer drain, and wall mounting bracket. The shampoo bowl can be supplied with an optional faucet kit (WSB-KIT), which includes a single-handle adjustable faucet, hand-held sprayer, and fixture-mounted vacuum breaker. All connections between the outside plumbing and the fixture are made underneath the vandal-resistant fixture, with anchoring through the included wall bracket and mounting holes (anchoring hardware and adequate backing by others).
WWF-5406/5408 Six and Eight Station Full Round 54″ Stainless Steel Washfountain
The Willoughby WWF-5406/5408 Six / Eight Station, Full Round, 54” Stainless Steel Deep Bowl Washfountain is a floor mounted, multi-user fixture for vandal-resistant commercial use. All WWF-5406/5408 deep bowl washfountain fixtures are fabricated from heavy gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard WWF-5406/5408 fixtures come with an integral, contoured, multi-user basin; drain assemblies; selected valve, controls, and plumbing; solid surface head cover; and stainless steel floor pedestal (anchoring hardware by others). It can be specified in either Six Station (WWF-5406) or Eight Station (WWF-5408) configurations, with an Adult ADA or Junior ADA (JR) rim height. The WWF-5406/5408 washfountain can be supplied with optional liquid soap dispensers and/or telescoping shroud for fixtures with supplies from above (installed by others). All connections between the outside plumbing and the WWF-5406/5408 washfountain are concealed within the stainless steel head kit and pedestal. The fixture meets all applicable ADA and ANSI accessibility guidelines (excluding FO Foot Operated valve models).
Stainless Steel Single Person Rear Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby UW-1317-HEU Stainless Steel Single Person Rear Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard UW-1317-HEU fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, and standard 4-point mounting. The UW-1317-HEU urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear and top (on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. The UW-1317-HEU urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor.
Stainless Steel Single Person Front Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby UW-1317-HEU-FA Stainless Steel Single Person Front Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard UW-1317-HEU-FA fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, with anchoring through the included Z-clip and front mounting flanges (anchoring hardware by others). The UW-1317-HEU-FA urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear and top (on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. A removable access panel attached w/ security screws allows access to all fixture plumbing inside. The UW-1317-HEU-FA urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor.
Stainless Steel Single Person Rear Mounted Ligature-Resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby ASUW-1314-HEU Stainless Steel Single Person Rear Mounted Ligature-Resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard ASUW-1314-HEU fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, and standard 4-point mounting. It has been thoughtfully designed to minimize potential ligature points. The ASUW-1314-HEU urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel urinal. The ASUW-1314-HEU urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor.
Stainless Steel Single Person Front Mounted Ligature-resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby ASUW-1314-HEU-FA Stainless Steel Single Person Front Mounted Ligature-resistant ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard ASUW-1314-HEU-FA fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, with anchoring through the included Z-clip and front mounting flanges (anchoring hardware by others). It has been thoughtfully designed to minimize potential ligature points. The ASUW-1314-HEU-FA urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within ot at the rear of the vandal-resistant, stainless steel urinal. A removable access panel attached w/ security screws allows access to all fixture plumbing inside. The ASUW-1314-HEU-FA urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor.