Lavatories
Showing all 30 results
-
WAW-2333-DMF AquaWave® Three Station Solid Surface Lavatory System for (DMF) Deck Mounted Faucets
The Willoughby WAW-2333-DMF AquaWave® Three Station Solid Surface Lavatory System for Deck Mounted Faucets is a multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAW-2333-DMF fixtures come with a contoured multi-user lavatory basin, drain grate assemblies, pre-assembled stainless steel mounting pedestal, and galvanized steel mounting backplate (anchoring hardware and adequate backing by others). The WAW-2333-DMF lavatory system can be supplied with optional faucet hole drilling, liquid soap dispensers, and/or a wall-mounted stainless steel kick plate (all installed by others). All connections between the outside plumbing and the WAW-2333-DMF AquaWave® Lavatory System are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
LRBHL-2220 Ligature-Resistant Solid Surface, Behavioral Health Lavatory (for Deck Mounted Faucet)
The Willoughby LRBHL-2220 Ligature-Resistant Solid Surface Behavioral Health Lavatory (for Deck Mounted Faucet) is a single-user fixture for vandal-resistant behavioral health environments. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. The rounded lavatory has been thoughtfully designed to minimize potential ligature points. Standard LRBHL-2220 fixtures shall be supplied with ligature-resistant drain and tailpiece. Fixtures with optional LRFC faucet shall be furnished with integral checkstop, flexible supply hoses, control valve, and valve power supply. An optional in-line thermostatic mixing valve is also available. All connections between the outside plumbing and the LRBHL-2220 behavioral health lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, TAS, UFAS, CBC, and ANSI accessibility guidelines when mounted at the correct, applicable rim height above the finished floor. A removable trap cover attached with security screws allows access to all fixture plumbing and mounting points inside. -
LRBCL-2030 Ligature-Resistant Solid Surface, Behavioral Health Corner Lavatory (for Deck Mounted Faucet)
The Willoughby LRBCL-2030 Ligature-Resistant Solid Surface Behavioral Health Corner Lavatory (for Deck Mounted Faucet) is a single-user fixture for vandal-resistant behavioral health environments. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. The rounded lavatory has been thoughtfully designed to minimize potential ligature points. Standard LRBCL-2030 fixtures shall be supplied with ligature-resistant drain and tailpiece. Fixtures with optional LRFC faucet shall be furnished with integral checkstop, flexible supply hoses, control valve, and valve power supply. An optional in-line thermostatic mixing valve is also available. All connections between the outside plumbing and the LRBCL-2030 behavioral health lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, TAS, UFAS, CBC, and ANSI accessibility guidelines when mounted at the correct, applicable rim height above the finished floor. A removable trap cover attached w/ security screws allows access to all fixture plumbing and mounting points inside. -
LRBHL-2320 Ligature-Resistant Solid Surface, Behavioral Health Lavatory
The Willoughby LRBHL-2320 Ligature-Resistant Solid Surface Behavioral Health Lavatory is a single-user fixture for vandal-resistant behavioral health environments. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard LRBHL-2320 fixtures come with a contoured lavatory basin; drain assembly; selected valve, control, and plumbing; and inline thermostatic mixing valve; with anchoring through the pre-assembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). The rounded lavatory has been thoughtfully designed to minimize potential ligature points. All connections between the outside plumbing and the LRBHL-2320 behavioral health lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached with security screws allows access to all fixture plumbing and mounting points inside. -
Stainless Steel Ligature-resistant Rear Mounted Behavioral Lavatory
The Willoughby WBLS-2018-HC Stainless Steel Ligature-resistant Rear Mounted Behavioral Lavatory is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBLS-2018-HC fixtures come with a rectangular-shaped lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The sloped top, angular profile lavatory has been thoughtfully designed to minimize potential ligature points. The WBLS-2018-HC lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The WBLS-2018-HC lavatory fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Ligature-resistant Front Mounted Behavioral Lavatory
The Willoughby WBLS-2018-HC-FA Stainless Steel Ligature-resistant Front Mounted Behavioral Lavatory is a single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBLS-2018- HC-FA fixtures come with an oval-shaped lavatory bowl, 1-1/2” F.I.P. slip-joint P-trap, with anchoring through the back-plate mounting holes (anchoring hardware by others). The sloped top, angular profile lavatory has been thoughtfully designed to minimize potential ligature points. The WBLS-2018- HC-FA lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The WBLS-2018- HC-FA lavatory fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
ASWLDR-1922 Ligature-Resistant Stainless Steel Behavioral Health Lavatory
The Willoughby ASWLDR-1922 Ligature-Resistant Stainless Steel Behavioral Health Lavatory is a single-user fixture for vandal-resistant behavioral health environments. Willoughby stainless steel lavatory fixtures are all-welded, fabricated from T304 stainless steel, polished to a #4 satin finish. Standard ASWLDR-1922 fixtures come with a round lavatory basin with slow drain; selected valve, control, and plumbing; and inline thermostatic mixing valve; with anchoring through the heavy gauge steel backplate (anchoring hardware and adequate backing by others). The rounded lavatory has been thoughtfully designed to minimize potential ligature points. All connections between the outside plumbing and the ASWLDR-1922 behavioral health lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached with security screws allows access to all fixture plumbing and mounting points inside. -
ASWLDR-1922-DMF Ligature-Resistant Stainless Steel Behavioral Health Lavatory
The Willoughby ASWLDR-1922-DMF Ligature-Resistant Stainless Steel Behavioral Health Lavatory is a single-user fixture for vandal-resistant behavioral health environments. Willoughby stainless steel lavatory fixtures are all-welded, fabricated from T304 stainless steel, polished to a #4 satin finish. Standard ASWLDR-1922-DMF fixtures come with a round lavatory basin with slow drain; selected valve, control, and plumbing; and inline thermostatic mixing valve; with anchoring through the heavy gauge steel backplate (anchoring hardware and adequate backing by others). The rounded lavatory has been thoughtfully designed to minimize potential ligature points. All connections between the outside plumbing and the ASWLDR-1922-DMF behavioral health lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached w/ security screws allows access to all fixture plumbing and mounting points inside. -
Stainless Steel 18″ Wide Rear Mounted Ligature-resistant Lavatory
The Willoughby ASHS-1013-06 Stainless Steel 18" Wide Rear Mounted Ligature-resistant Lavatory is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASHS-1013-06 fixtures come with an oval-shaped lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. It has been thoughtfully designed to minimize potential ligature points. The ASHS-1013-06 lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless Steel 18″ Wide Front Mounted Ligature-resistant Lavatory
The Willoughby ASHS-1013-06-FA Stainless Steel 18" Wide Front Mounted Ligature-resistant Lavatory is a single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ASHS-1013-06-FA fixtures come with an oval-shaped lavatory bowl, 1-1/2” F.I.P. slip-joint P-trap, with anchoring through the provided mounting holes (anchoring hardware by others). The ASHS-1013-06-FA lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory-installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable panels attached w/ security screws allow access to all fixture plumbing and mounting points inside. -
BWLDR-1922 Stainless Steel Bariatric Lavatory
The Willoughby BWLDR-1922 Stainless Steel Bariatric Lavatory is a single-user fixture for vandal-resistant bariatric health environments. This wall-mounted bariatric lavatory accommodates bariatric patients and can withstand a static downward force of 650 lbs. at the front edge of the lavatory with no permanent physical damage). The lavatory has a rounded integral sloped backsplash and rounded integral side splashes. The fixture is fabricated from 14-gauge, type 304 stainless steel. The construction is welded with removable a trap enclosure. The fixture exterior, including lavatory deck, basin, and trap enclosure, all have an antimicrobial gloss white powder coat enamel finish. A bare stainless steel lavatory basin with satin finish is optional. All connections between the outside plumbing and the BWLDR-1922 lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached with security screws allows access to all fixture plumbing and mounting points inside. -
15″ Wide Combination Lavatory/Toilet Unit
Willoughby 15" Wide Combination Lavatory/Toilet Unit (1546-Series) is a single-user fixture for use in security environments with either 45-degree or 90-degree mechanical chases. Each of our 15" Wide Combination Lavatory/Toilet Units are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 1546-Series fixtures come with elongated blowout toilet, multi-sided lavatory, and standard 4-point mounting. The 1546-Series combination fixture can be supplied with a variety of optional features including valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless Steel 18″ Wide Rear Mounted Rectangular Cabinet Lavatory
The Willoughby HS-1013-96 Stainless Steel 18" Wide Rear Mounted Rectangular Cabinet Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-96 fixtures come with an oval-shaped lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The HS-1013-96 lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless Steel 18″ Wide Front Mounted Rectangular Cabinet Lavatory
The Willoughby HS-1013-96-FA Stainless Steel 18" Wide Front Mounted Rectangular Cabinet Lavatory is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-96-FA fixtures come with an oval-shaped lavatory bowl, 1-1/2” F.I.P. slip-joint P-trap, with anchoring through the included Z-clip and mounting holes (anchoring hardware by others). The HS-1013-96-FA lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. -
Stainless Steel 18″ Wide Rear Mounted Handicap-ADA Compliant Lavatory
The Willoughby HS-1013-46-HC Stainless Steel 18" Wide Rear Mounted Handicap-ADA Compliant Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-46-HC fixtures come with an oval-shaped lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The HS-1013-46-HC lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The HS-1013-46-HC lavatory fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel 18″ Wide Front Mounted Handicap-ADA Compliant Lavatory
The Willoughby HS-1013-46-HC-FA Stainless Steel 18" Wide Front Mounted Handicap-ADA Compliant Lavatory is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-46-HC- FA fixtures come with an oval-shaped lavatory bowl, 1-1/2” F.I.P. slip-joint P-trap, with anchoring through the included Z-clip and mounting holes (anchoring hardware by others). The HS-1013-46-HC-FA lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The HS-1013-46-HC-FA lavatory fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
BWLDR-1922-DMF Stainless Steel Bariatric Lavatory (for Deck Mounted Faucet)
The Willoughby BWLDR-1922-DMF Stainless Steel Bariatric Lavatory is a single-user fixture for vandal-resistant bariatric health environments. This wall-mounted bariatric lavatory accommodates bariatric patients and can withstand a static downward force of 650 lbs. at the front edge of the lavatory with no permanent physical damage). The lavatory has a rounded integral sloped backsplash and rounded integral side splashes. The fixture is fabricated from 14-gauge, type 304 stainless steel. The construction is welded with removable a trap enclosure. The fixture exterior, including lavatory deck, basin, and trap enclosure, all have an antimicrobial gloss white powder coat enamel finish. A bare stainless steel lavatory basin with satin finish is optional. All connections between the outside plumbing and the BWLDR-1922-DMF lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached with security screws allows access to all fixture plumbing and mounting points inside. -
BHS-3123 ADA-Compliant Solid Surface Bariatric Sink (Lavatory)
The Willoughby BHS-3123 ADA-Compliant Solid Surface Bariatric Sink (Lavatory) is a single-user solid surface sink fixture for use in bariatric healthcare environments. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard BHS-3123 fixtures come with a contoured D-shaped lavatory basin; antimicrobial drain assembly w/ offset tailpiece; 1.5 GPM, 4CC, 8” gooseneck faucet and plumbing; and preassembled stainless steel mounting pedestal w/ solid polymer panel cladding. Standard anchoring is through the preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). The rounded lavatory has been designed to withstand a static edge load of 1,000 lbs. to accommodate bariatric healthcare patients. The BHS-3123 bariatric lavatory can be ordered with a variety of optional features including: alternative faucets, faucet hole drilling, plumbing, etc. All connections between the outside plumbing and the BHS-3123 bariatric healthcare lavatory are concealed within the stainless steel pedestal, with a secure access panel attached w/ security screws allowing access to all fixture plumbing and mounting points inside. The BHS-3123 fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
ES-1015-HC Handicap Stainless Steel Commercial Lavatory
The Willoughby ES-1015- HC Stainless Steel Handicap Commercial Lavatory is a single-user fixture for vandal-resistant commercial use. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ES-1015- HC fixtures come with a rectangular-shaped lavatory bowl, 4” x 1-1/2” O.D. tailpiece, with anchoring through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The ES-1015- HC lavatory can be supplied with a variety of optional features including: faucet hole punching, valves, controls, plumbing, etc. (installed by others). All connections between the outside plumbing and the fixture are made underneath the vandal-resistant, stainless steel fixture. The ES-1015- HC lavatory fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WEL-2311 AquaSurf® Single Station Executive Lavatory
The Willoughby WEL-2311 AquaSurf® Executive Lavatory is a single-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WEL-2311 fixtures come with a rounded rectangular-shaped lavatory bowl, with anchoring through the included heavy gauge, Type 304 stainless steel mounting bracket (anchoring hardware and adequate backing by others). The WEL-2311 lavatory can be supplied with optional faucet hole punching and TE trap enclosure (installed by others). All connections between the outside plumbing and the WEL-2311 Executive Lavatory are made underneath, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
CEL Multi-station Stainless Steel Lavatory
The Willoughby CEL Multi-station Stainless Steel Lavatory is a multi-user fixture for vandal-resistant commercial use. All CEL lavatory fixtures are fabricated from 14 gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard CEL fixtures come with an integral basin/pedestal; drain assembly; selected valve, controls, and plumbing; and stainless steel trap enclosure (shroud). It can be specified in either Two Station (CEL-2817- 2) or Three Station (CEL-4818- 3) configurations, with an Adult ADA or Junior ADA (JR) rim height. Anchoring is through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The CEL lavatory can be supplied with optional DC white powder coat finish. All connections between the outside plumbing and the CEL lavatory are concealed within the stainless steel pedestal. The fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel 18″ Wide Rear Mounted Handicap-ADA Compliant Rectangular Bowl Lavatory
The Willoughby HS-1014-96-HC Stainless Steel 18" Rear Mounted, Handicap-ADA Compliant, Rectangular Bowl, Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1014-96-HC fixtures come with a rectangular-shaped lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The HS-1014-96-HC lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The HS-1014-96-HC lavatory fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel 18″ Wide Front Mounted Handicap-ADA Compliant Rectangular Bowl Lavatory
The Willoughby HS-1014-96-HC-FA Stainless Steel 18" Wide Front Mounted Handicap-ADA Compliant Rectangular Bowl Lavatory is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1014-96-HC-FA fixtures come with a rectangular-shaped lavatory bowl, 1-1/2” F.I.P. slip-joint P-trap, with anchoring through the included Z-clip and mounting holes (anchoring hardware by others). The HS-1014-96-HC-FA lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The HS-1014-96-HC-FA lavatory fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel 15″ Wide Rear Mounted Lavatory
The Willoughby HS-1013-46-15 Stainless Steel 15" Wide Rear Mounted Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-46-15 fixtures come with a multi-sided lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The HS-1013-46-15 lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless Steel 20″ Wide Rear Mounted Rectangular Bowl Lavatory
The Willoughby HS-1015-20 Stainless Steel Wide Rear Mounted Rectangular Bowl Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1015-20 fixtures come with a rectangular-shaped lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The HS-1015-20 lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
WAF-3300/3301 AquaFount® Three Station Solid Surface Washfountain
The Willoughby WAF-3300/3301 AquaFount® Three Station Solid Surface Washfountain is a multi-user solid surface fixture for vandal-resistant commercial use. It can be specified in either Floor Mounted (WAF-3300) or Wall Mounted (WAF-3301) configurations, with an Adult or Juvenile (JR) rim height. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-3300/3301 fixtures come with a contoured multi-user lavatory basin; drain grate assembly; selected valve, controls, and plumbing; and preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). The WAF-3300/3301 washfountain can be supplied with optional liquid soap dispensers. All connections between the outside plumbing and the WAF-3300/3301 AquaFount® washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel 13″ Wide Rear Mounted Corner Lavatory
The Willoughby CS-1013-46 Stainless Steel 13" Rear Mounted Corner Lavatory is a single-user fixture for corner-mounting in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CS-1013-46 fixtures come with a multi-sided lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The CS-1013-46 lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless Steel Rear Mounted China Alternative Lavatory
Willoughby CHS-1013-46 Stainless Steel Rear Mounted, China Alternative Lavatories are bathroom sinks for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CHS-1013- 46 fixtures come with a multi-sided lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The CHS-1013- 46 lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Replacement: Stainless Steel 15″ Wide Rear Mounted Lavatory
The Willoughby HS-1013-46-15-RPF Replacement 15” Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-46-15-RPF fixtures come with an oval-shaped lavatory bowl, EB elbow waste (1-1/2” F.I.P.), and standard 4-point mounting. The HS-1013-46-15-RPF replacement lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Replacement: Stainless Steel 18″ Wide Rear Mounted Rectangular Cabinet Lavatory
The Willoughby HS-1013-96-RPF Stainless Steel Replacement 18” Wide Rear Mounted Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-96-RPF fixtures come with an oval-shaped lavatory bowl, EB elbow waste (1-1/2” F.I.P.), and standard 4-point mounting. The HS-1013-96-RPF replacement lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet.