Security Products
Showing 65–128 of 128 results
-
LBJ Lockable Ball Joint Shower Head
Willoughby model LBJ Lockable Ball Joint Shower Head shall be fixed type, constructed of chrome-plated brass, mounted from the rear with no visible fasteners or removable parts. The head shall have 3/8" F.I.P. threads on the inlet. The shower head spray direction can be locked in position using the recessed set screw. -
18″ Wide Front Access Combination Lavatory/Toilet Unit
The Willoughby 18" Wide Combination Lavatory/Toilet Unit (1846-FA-Series) is a front access single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. The fixture is designed for surface mounting on either a 45-degree or 90-degree interior wall. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 1846-FA-Series fixtures come with elongated blowout toilet, oval lavatory, and holes for 6-point anchor mounting (hardware provided by others). The 1846-FA-Series Combination fixture can be supplied with a variety of optional features including valves, controls, plumbing, etc., factory-installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. Removable access panels attached w/ security screws will allow access to all fixture plumbing and mounting points inside. -
Stainless Steel 18″ Wide Front Mounted Handicap-ADA Compliant Rectangular Bowl Lavatory
The Willoughby HS-1014-96-HC-FA Stainless Steel 18" Wide Front Mounted Handicap-ADA Compliant Rectangular Bowl Lavatory is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1014-96-HC-FA fixtures come with a rectangular-shaped lavatory bowl, 1-1/2” F.I.P. slip-joint P-trap, with anchoring through the included Z-clip and mounting holes (anchoring hardware by others). The HS-1014-96-HC-FA lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The HS-1014-96-HC-FA lavatory fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
US/KS-3660-HC-FA ADA-Compliant Front Access Roll-In Cabinet Shower
The Willoughby US/KS-3660-HC-FA Roll-In Front Access Cabinet ADA Compliant Shower is a single-user fixture with a handicap shower base, intended for use in security environments where a mechanical chase is either non-existent or difficult to access. Unitized “US” fixtures are all-welded, fabricated from 14 gauge and 11 gauge, Type 304 stainless steel polished to a #4 satin finish, with slip-resistant glass-bead- blast finish floor; fixtures are also available in Knockdown “KS” configuration (non-welded). Standard US/KS-3660- HC-FA Handicap Cabinet Showers come with an integral ICD inside caulk drain (2”), removable strainer, GB24 horizontal 24” grab bar, GB30 horizontal 30” grab bar, GB24V vertical 24” grab bar, and FSS fold-up shower seat. The US/KS-3660- HC-FA Roll-In Front Access Handicap Cabinet Shower can be supplied with a variety of optional features including: valves, controls, plumbing, exterior finish, etc. All connections between the outside plumbing and the fixture are made behind the vandal-resistant, stainless steel shower panel. Removable shower panel attached w/ security screws allows access to all the fixture plumbing within. The US/KS-3660- HC-FA Roll-In Front Access Handicap Cabinet Shower meets all applicable ADA, UFAS, and ANSI accessibility guidelines when equipped with shower valve controls mounted on the Back Wall of the fixture, adjacent to the FSS fold-up shower seat. -
Stainless Steel 15″ Wide Rear Mounted Lavatory
The Willoughby HS-1013-46-15 Stainless Steel 15" Wide Rear Mounted Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-46-15 fixtures come with a multi-sided lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The HS-1013-46-15 lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless Steel Single Person Rear Mounted Blowout Flush Straddle Urinal
The Willoughby UW-1412-BJ Stainless Steel Single Person Rear Mounted Blowout Flush Straddle Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1412- BJ fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 4-point mounting. The UW-1412-BJ urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. The UW-1412-BJ urinal fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Single Person Front Mounted Washout Flush Trough Urinal
The Willoughby UW-1814-WO-FA Stainless Steel Single Person Front Mounted Washout Flush Trough Urinal is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1814-WO-FA fixtures come with full perimeter flushing rim, 1-1/2” F.I.P. slip-joint P-trap, removable P-trap enclosure, with anchoring through the included Z-clip and front mounting flanges (anchoring hardware by others). The UW-1814-WO-FA urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal-resistant, stainless steel urinal. -
18″ Wide Ligature-Resistant Combination Lavatory/Toilet Unit
The Willoughby 18" Wide Combination Lavatory/Toilet Unit (1806-Series) is a ligature-resistant single-user fixture for use in security and behavioral environments with either 45-degree or 90-degree mechanical chases. These combis are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 1806-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, and standard 4-point mounting. It has been thoughtfully designed to minimize potential ligature points. Our Ligature-Resistant Combination Unit can be supplied with a variety of optional features including valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
18″ Wide Ligature-Resistant Front Access Combination Lavatory/Toilet Unit
The Willoughby 18" Wide Combination Lavatory/Toilet Unit (1806-FA-Series) is a ligature-resistant front access single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. The fixture is designed for surface mounting on either a 45-degree or 90-degree interior wall. This combi is all-welded and fabricated from 14 gauge, T304 stainless steel polished to a #4 satin finish. Standard 1806-FA-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, and holes for 6-point anchor mounting (hardware provided by others). It has been thoughtfully designed to minimize potential ligature points. The 18" Ligature-Resistant Combination Unit can be supplied with a variety of optional features including valves, controls, plumbing, etc., factory-installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. Removable access panels attached w/ security screws will allow access to all fixture plumbing and mounting points inside. -
20″ Wide Combination Lavatory/Toilet Unit with Offset Toilet Bowl
The Willoughby 20" Wide Combination Lavatory/Toilet Unit (2096-Series) is a single-user fixture with an offset toilet bowl for use in security environments, typically with 90-degree mechanical chases. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 2096-Series fixtures come with offset blowout elongated toilet, oval lavatory sink, and standard 4-point mounting. The 2096-Series Combination fixture can be supplied with a variety of optional features including valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
20″ Wide Combination Lavatory/Toilet Unit with Angled Toilet Bowl
The Willoughby 20" Wide Combination Lavatory/Toilet Unit (2046-Series) is a single-user fixture with an angled toilet bowl for use in security environments, typically with 45-degree mechanical chases. Our combis are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 2046-Series fixtures come with angled elongated blowout toilet, oval lavatory, and standard 4-point mounting. Our 20" Wide Combination Unit can be supplied with a variety of optional features including valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless Steel Single Person Rear Mounted Washout Flush Trough Urinal
The Willoughby UW-1814-WO Stainless Steel Single Person Rear Mounted Washout Flush Trough Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1814-WO fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 4-point mounting. The UW-1814-WO urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. -
Stainless Steel Single Person Rear Mounted Blowout Flush Trough Urinal
The Willoughby UW-1814-BJ Stainless Steel Single Person Rear Mounted Blowout Flush Trough Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1814-BJ fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 4-point mounting. The UW-1814-BJ urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. -
Stainless Steel Multi-Person Front Mounted Washout Trough Urinal
The Willoughby UW-1800-FA Stainless Steel Multi-Person Front Mounted Washout Trough Urinal is a multiple-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1800-FA-Series fixtures come with full-length rear flush chamber, 1-1/2”O.D. x 4”L. drain tailpiece, with anchoring through the included Z-clips and front mounting slots (anchoring hardware by others). Several trough lengths are available; see Spec Page for details. The UW-1800-FA-Series urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and top, left, or right side (depending on inlet location) of the vandal-resistant, stainless steel urinal. -
WBIS Series Rear Mounted Built-In Shower
The Willoughby WBIS Rear Mounted Built-in Shower is a single-user fixture for use in security environments with an accessible mechanical chase. Shower plates are fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBIS fixtures come with an NPS shower head (stainless steel), 2 component shower plates (stainless steel shower wall panels), and standard 4-point mounting. The WBIS built-in shower can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear of the vandal-resistant, stainless steel plates. The WBIS can be installed to conform to most ADA requirements (installation by others). -
SB-Series Stainless Steel Shower Base
The Willoughby SB-Series Stainless Steel Shower Base is a single-user fixture for use in security environments. Fixtures are all-welded, fabricated from 14 gauge and 11 gauge, Type 304 stainless steel polished to a #4 satin finish, with slip-resistant glass-bead- blast finish floor. Standard SB-Series fixtures come with an integral EBD elbow waste (2” F.I.P.), strainer drain, and tiling flange. The SB-Series shower base can be supplied with a variety of optional features including: size, drain type, chase orientation, and exterior finish. All connections between the outside plumbing and the fixture are made within the vandal-resistant, stainless steel fixture. -
Stainless Steel Small Profile Handicap-ADA Compliant Front Access Drinking Fountain
The Willoughby DF-1812-FA Stainless Steel Small Profile Handicap-ADA Compliant, Front Access Drinking Fountain is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard DF-1812-FA fixtures come with a rounded rectangular basin, CDB drinking fountain bubbler, PSL1 single temperature non-metering valve, RPT slip-joint P-trap (1-1/2” F.I.P.), with anchoring through the included mounting plate (anchoring hardware by others). The DF-1812-FA drinking fountain can be supplied with optional features including: plumbing, mounting guides, etc. All valves and plumbing will be factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The DF-1812-FA drinking fountain meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor (installation by others). -
Stainless Steel 20″ Wide Rear Mounted Rectangular Bowl Lavatory
The Willoughby HS-1015-20 Stainless Steel Wide Rear Mounted Rectangular Bowl Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1015-20 fixtures come with a rectangular-shaped lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The HS-1015-20 lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
WRS-FA Series Front Mounted Recessed Shower Panel
The Willoughby WRS-FA Front Mounted, Recessed Shower Panel is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixture panels are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WRS-FA fixtures come with an NPS shower head and 18 gauge galvanized steel mounting frame (shipped separately). The WRS-FA shower panel can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within the vandal-resistant, stainless steel panel. Removable face panel attached w/ security screws allows access to all fixture plumbing and mounting points within. -
FMR1 Framed Security Mirror Rear Mounted
The Willoughby FMR1 Framed Security Mirror is a fabricated 16 gauge, Type 304 stainless steel accessory, designed to provide a simple, vandal-resistant alternative to traditional mirrors in a security environment. The FMR1 framed mirrors will come with a #8 non-directional mirror finish, full mounting frame w/ ½” fiberboard mirror backing, and mounting hardware for walls up to 8” thick. FMR1 security mirrors will require a chase for installation. -
Stainless Steel Multi-Person Rear Mounted Washout Trough Urinal
The Willoughby UW-1800 Stainless Steel Multi-Person Rear Mounted Washout Trough Urinal is a multiple-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1800-Series fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 8-point mounting. Several trough lengths are available; see Spec Page for details. The UW-1800-Series urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. -
Stainless Steel Rear Mounted Service Sink
The Willoughby Stainless Steel Rear Mounted Service Sink is a utility fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard SS fixtures come with a 10” deep rectangular sink bowl, 2” F.I.P. elbow waste, fast drain with air vent, and standard 6-point mounting for Off-Floor fixtures or 8-point mounting for On-Floor fixtures. The SS service sink can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless Steel Front Mounted Service Sink
The Willoughby SS-FA Stainless Steel Front Mounted Service Sink is a utility fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard SS-FA fixtures come with a 10” deep rectangular sink bowl, 1-1/2” F.I.P. slip-joint P-trap, fast drain with an air vent, with anchoring through the included Z-clip and mounting holes (anchoring hardware by others). The SS-FA service sink can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable access panels attached w/ security screws allow access to all fixture plumbing and mounting points inside. -
Piezo Switch
-
RTH Series Tissue Holder
The Willoughby RTH line of Recessed Toilet Tissue Holders (models: RTH1, RTH2) are die-formed 14 gauge, Type 304 stainless steel accessories, designed to accommodate a standard roll of toilet tissue. When the RTH tissue holder is stocked with a standard-size toilet tissue roll, it becomes nearly impossible to conceal any contraband behind the roll without the roll protruding out for the correctional officers to see. All mounting hardware or stainless steel security screws are typically provided with the tissue holder, with any needed wall anchors supplied by others. -
Stainless Steel Single Person Floor Mounted Stall Urinal
The Willoughby UF-1438 Stainless Steel Single Person Floor Mounted Stall Urinal is a single-user fixture for use in security environments with or without a mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UF-1438 fixtures come with full perimeter flushing rim, 2” caulk waste connection, flat strainer drain, with anchoring through the front flanges (anchoring hardware by others). The UF-1438 urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal-resistant, stainless steel urinal. The UF-1438 urinal fixture meets all applicable ADA and CBC accessibility guidelines. -
ASRTH Series Ligature-Resistant Tissue Holder
The Willoughby ASRTH Recessed Toilet Roll Holder (models: ASRTH1, ASRTH2, and ASRTH3) is a die-formed 14 gauge, Type 304 stainless steel accessory, designed to accommodate a standard roll of toilet tissue. When the ASRTH tissue holder is stocked with a standard-size toilet tissue roll, it becomes nearly impossible to conceal any contraband within the accessory. All mounting hardware or stainless steel security screws are typically provided supplied with the tissue holder, with any needed wall anchors supplied by others. The ASRTH tissue holder is ligature-resistant. -
RSD Wall Mounted Recessed Soap Dish
The Willoughby RSD line of Recessed Soap Dishes (models: RSD1 and RSD2) are die-formed 16 gauge, Type 304 stainless steel accessories, designed to accommodate a single bar of soap. All mounting hardware or stainless steel security screws are typically provided with the soap dish, with any needed wall anchors supplied by others. RSD soap dishes have wide-radius corners to help reduce residue build-up. -
RS Series Recessed Shelf
The Willoughby RS line of Recessed Shelves (models: RS1 and RS2) are all-welded 16 gauge, Type 304 stainless steel accessories, designed to provide a simple, vandal-resistant storage space. All mounting hardware or stainless steel security screws are typically provided with the recessed shelves, with any needed wall anchors supplied by others. RS recessed shelves can be specified in either rear-mounted or front-mounted configurations. -
26″ Wide Combination Lavatory/Toilet Unit with Offset Toilet Bowl
The Willoughby 26" Wide Combination Lavatory/Toilet Unit (2696-Series) is a single-user fixture with an offset toilet bowl for use in security environments, typically with 90-degree mechanical chases. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 2696-Series fixtures come with offset elongated blowout toilet, oval lavatory, and standard 4-point mounting. The 2696-Series Combination fixture can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
37″ Wide ADA-Compliant Combination Lavatory/Toilet Unit for 90° Chase Wall
The Willoughby 37" Wide Combination Lavatory/Toilet Unit (3696-Series) is an ADA-compliant single-user fixture for use in security environments with 90-degree mechanical chases. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 3696-Series fixtures come with elongated blowout toilet, oval lavatory, and standard 6-point mounting. The 3696-Series Combination fixture can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The 3696-Series Combination fixture meets all applicable ADA, UFAS, and ANSI accessibility guidelines; a CBC-compliant model 3696 is also available. ADA Compliance requires the addition of a Grab Bar (GB4296); sold separately, field installed. -
37″ Wide ADA-Compliant Front Access Combination Lavatory/Toilet Unit for 90° Interior Wall
The Willoughby 37" Wide Combination Lavatory/Toilet Unit (3696-FA-Series) is an ADA-compliant front access single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. The fixture is designed for surface mounting on a 90-degree interior wall. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 3696-FA-Series fixtures come with elongated blowout toilet, oval lavatory, and holes for 5-point anchor mounting (hardware provided by others). This 37" Wide Combination Unit fixture can be supplied with a variety of optional features including valves, controls, plumbing, etc., factory-installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. Removable access panels attached w/ security screws will allow access to all fixture plumbing and mounting points inside. The 3696-FA-Series Combination fixture meets all applicable ADA, UFAS, and ANSI accessibility guidelines; a CBC-compliant model 3696-FA is also available. ADA Compliance requires the addition of a Grab Bar (GB4296); sold separately, field installed. -
49″ Wide ADA-Compliant Ligature-Resistant Combination Lavatory/Toilet Unit for 90° Chase Wall
The Willoughby 49" Wide Combination Lavatory/Toilet Unit (4896-Series) is an ADA-compliant, ligature-resistant, single-user fixture for use in security environments with 90-degree mechanical chases. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 4896-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, an integral grab bar with ligature-resistant closure plate, and standard 6-point mounting. It has been thoughtfully designed to minimize potential ligature points. The 4896-Series Combination fixture can be supplied with a variety of optional features including valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The 4896-Series Combination fixture meets all applicable ADA, UFAS, and ANSI accessibility guidelines; a CBC-compliant model 4896 is also available. -
49″ Wide ADA-Compliant Ligature-Resistant Front Access Combination Lavatory/Toilet Unit for 90° Interior Wall
The Willoughby 49" Wide Combination Lavatory/Toilet Unit (4896-FA-Series) is an ADA-compliant, ligature-resistant, front access single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. The fixture is designed for surface mounting on a 90-degree interior wall. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 4896-FA-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, an integral grab bar with ligature-resistant closure plate, and holes for 5-point anchor mounting (hardware provided by others). It has been thoughtfully designed to minimize potential ligature points. 49" Willoughby Combination Units can be supplied with a variety of optional features including valves, controls, plumbing, etc., factory-installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. Removable access panels attached w/ security screws will allow access to all fixture plumbing and mounting points inside. The 4896-FA-Series Combination fixture meets all applicable ADA, UFAS, and ANSI accessibility guidelines; a CBC-compliant model 4896-FA is also available. -
Stainless steel, compact, wall outlet, wall mounted, blowout series toilet
The Willoughby ETW‐1490‐ES Stainless steel, compact, wall outlet, wall mounted, blowout series toilet is a single‐user ADA toilet (ADA-compatible) fixture for use in security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW‐1490‐ES fixtures come with an elongated blowout toilet bowl and standard 6‐point mounting. The ETW‐1490‐ES toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear of the vandal‐resistant, stainless steel toilet. The ETW‐1490‐ES toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when mounted at the correct finished toilet seat height. -
Stainless steel, wall outlet, floor mounted, blowout series toilet
The Willoughby ETW-1490-FM Stainless steel, rear mounted, wall outlet, floor mounted, blowout series toilet is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW-1490-FM fixtures come with an elongated blowout toilet bowl and standard 6-point floor mounting (4 in-wall, 2 in-floor). The ETW-1490-FM toilet can be supplied with a variety of optional features (valves, controls, plumbing). All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet. The ETW-1490-FM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap-ADA Compliant) option. -
Stainless steel, front mounted, wall outlet, floor mounted, blowout series toilet
The Willoughby ETW‐1490‐FM‐FA Stainless steel, front mounted, wall outlet, floor mounted, blowout series toilet is a single‐user fixture for use in security environments where a mechanical chase is either non‐existent or difficult to access. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW‐1490‐FM‐FA fixtures come with an elongated blowout toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). The ETW‐1490‐FM‐FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETW‐1490‐FM‐FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option. -
Stainless steel, rear mounted, wall outlet, floor mounted, siphon jet series toilet
The Willoughby ETWS‐1490‐FM Stainless steel, rear mounted, wall outlet, floor mounted, siphon jet series toilet is a single‐user floor mounted toilet for use in security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETWS‐1490‐FM fixtures come with an elongated siphon jet toilet bowl and standard 6‐point floor mounting (4 in‐wall, 2 in‐floor). The ETWS‐1490‐FM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETWS‐1490‐FM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option. -
Stainless steel, front mounted, wall outlet, floor mounted, siphon jet series toilet
The Willoughby ETWS‐1490‐FM‐FA Stainless steel, front mounted, wall outlet, floor mounted, siphon jet series toilet is a single‐user fixture for use in security environments where a mechanical chase is either non‐existent or difficult to access. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETWS‐1490‐FM‐FA jail toilet fixtures come with an elongated siphon jet toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). The ETWS‐1490‐FM‐FA jail toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETWS‐1490‐FM‐FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option. -
GB Series Grab Bars
The Willoughby GB Series of grab bars (models: GB__) are fabricated from Type 304 stainless steel. This accessory is designed to provide a wall-mounted gripping surface for security environments. Grab bars can be specified in several lengths ranging from 18” to 48”, with exposed mounting flanges standard. -
Stainless Steel 13″ Wide Rear Mounted Corner Lavatory
The Willoughby CS-1013-46 Stainless Steel 13" Rear Mounted Corner Lavatory is a single-user fixture for corner-mounting in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CS-1013-46 fixtures come with a multi-sided lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The CS-1013-46 lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless steel, rear mounted, wall outlet, wall mounted, blowout series toilet
The Willoughby ETW‐1490‐OF Stainless steel, rear mounted, wall outlet, wall mounted, blowout series toilet is a single‐user fixture for use in security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW‐1490‐OF fixtures come with an elongated blowout toilet bowl and standard 4‐point wall mounting. The ETW‐1490‐OF toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETW‐1490‐OF toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when mounted at the correct finished toilet seat height. -
Stainless Steel Rear Mounted China Alternative Lavatory
Willoughby CHS-1013-46 Stainless Steel Rear Mounted, China Alternative Lavatories are bathroom sinks for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CHS-1013- 46 fixtures come with a multi-sided lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The CHS-1013- 46 lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless steel, rear mounted, wall outlet, wall mounted, siphon jet series toilet
Willoughby's ETWS‐1490‐OF Stainless steel, rear mounted, wall outlet, wall mounted, siphon jet series toilet are wall hung toilets designed for an institutional, stainless steel bathroom with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETWS‐1490‐OF fixtures come with an elongated siphon jet toilet bowl and standard 4‐point wall mounting. The ETWS‐1490‐OF toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETWS‐1490‐OF toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when mounted at the correct finished toilet seat height. -
Stainless steel, carrier mounted (3-bolt), wall outlet, blowout series toilet
The Willoughby ETW‐1490‐CM Stainless steel, carrier mounted (3-bolt), wall outlet, blowout series toilet is a single user fixture for use in security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW‐1490‐CM fixtures come with an elongated blowout toilet bowl and standard 3‐bolt blowout carrier mounting. The ETW‐1490‐CM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETW‐1490‐CM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when mounted at the correct finished toilet seat height. -
FSS Series Folding Shower Seat
The Willoughby FSS-Series Folding Shower Seat is a fabricated heavy-gauge, Type 304 stainless steel accessory, designed to provide wall-mounted seating in showering environments. Typical FSS handicap shower seats will come polished to a #3 stainless steel satin finish, with any needed hardware and wall anchors supplied by others. The seat meets the guidelines for seating in handicapped shower facilities, and can easily be folded up when not in use (seat must be mounted a min. 1” from the wall if used in conjunction with a grab bar above). -
Stainless steel, carrier mounted (4-bolt), wall outlet, siphon jet series toilet
The Willoughby ETWS‐1490‐CM Stainless steel, carrier mounted (4-bolt), wall outlet, siphon jet series toilet is a single‐user fixture for use in security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETWS‐1490‐CM fixtures come with an elongated siphon jet toilet bowl and standard 4‐bolt siphon jet carrier mounting. The ETWS‐1490‐CM toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal‐resistant, stainless steel toilet. The ETWS‐1490‐CM toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when mounted at the correct finished toilet seat height. -
Replacement: Stainless Steel 15″ Wide Rear Mounted Lavatory
The Willoughby HS-1013-46-15-RPF Replacement 15” Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-46-15-RPF fixtures come with an oval-shaped lavatory bowl, EB elbow waste (1-1/2” F.I.P.), and standard 4-point mounting. The HS-1013-46-15-RPF replacement lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Replacement: Stainless Steel 18″ Wide Rear Mounted Rectangular Cabinet Lavatory
The Willoughby HS-1013-96-RPF Stainless Steel Replacement 18” Wide Rear Mounted Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-96-RPF fixtures come with an oval-shaped lavatory bowl, EB elbow waste (1-1/2” F.I.P.), and standard 4-point mounting. The HS-1013-96-RPF replacement lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless steel, rear mounted, floor outlet, floor mounted, siphon jet series toilet
The Willoughby ETF-1490-FM Stainless steel, rear mounted, floor outlet, floor mounted, siphon jet series toilet is a single-user fixture designed for security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14-gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETF‐1490‐FM fixtures come with an elongated siphon jet toilet bowl and standard 4‐point floor mounting (2 in‐wall, 2 in‐floor). The ETF-1490-FM stainless steel toilet can be supplied with a a variety of optional features (valves, controls, plumbing, etc.). All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location). This toilet model meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option. -
Stainless steel, front mounted, floor outlet, floor mounted, siphon jet series toilet (4-1/4″ Rough-in)
The Willoughby ETF‐1490‐FM‐FA Stainless steel, front mounted, floor outlet, floor mounted, siphon jet series toilet (4-1/4" Rough-in) is a single‐user fixture for use in security environments where a mechanical chase is either non‐existent or difficult to access. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETF‐1490‐FM‐FA fixtures come with an elongated siphon jet toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). The ETF‐1490‐FM‐FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal‐resistant, stainless steel toilet. The ETF‐1490‐FM‐FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option. -
Stainless Steel Single Person Rear Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby UW-1317-HEU Stainless Steel Single Person Rear Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard UW-1317-HEU fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, and standard 4-point mounting. The UW-1317-HEU urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear and top (on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. The UW-1317-HEU urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Single Person Front Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal
The Willoughby UW-1317-HEU-FA Stainless Steel Single Person Front Mounted ADA-Compliant Contoured Washout Flush High Efficiency Urinal is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, with contoured interior and exterior surfaces. Standard UW-1317-HEU-FA fixtures come with machined stainless steel flush nozzle, 1-1/2” F.I.P. slip-joint P-trap, 3/4” N.P.T. male flush inlet, with anchoring through the included Z-clip and front mounting flanges (anchoring hardware by others). The UW-1317-HEU-FA urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear and top (on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. A removable access panel attached w/ security screws allows access to all fixture plumbing inside. The UW-1317-HEU-FA urinal fixture meets all applicable ADA, CBC, ANSI, and UFAS accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Replacement: Wall Mounted, Wall Outlet, Combination Lavatory/Toilet Unit for Super Secur A-350
The Willoughby Wall Mounted, Wall Outlet Combination Lavatory/Toilet Unit (ECW-1546-350-RPF) is a single-user replacement fixture for use in security environments with an accessible mechanical chase. Designed as a direct replacement for the discontinued Super Secur A-350. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ECW-1546-350-RPF fixtures come with elongated blowout toilet, multi-sided lavatory, CW2 combined lavatory waste w/ cleanout, GWC gasketed waste connection, and 3-point carrier mounting w/ (2) additional mounting tappings above the lavatory. The ECW-1546-350-RPF replacement combination fixture can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are concealed within the vandal-resistant, stainless steel cabinet. -
Replacement: Floor Mounted, Floor Outlet, Combination Lavatory/Toilet Unit for Super Secur A-150F
The Willoughby Floor Mounted, Floor Outlet Combination Lavatory/Toilet Unit (ECF-1546-150-RPF) is a single-user replacement fixture for use in security environments with an accessible mechanical chase. Designed as a direct replacement for the discontinued Super Secur A-150F. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ECF-1546-150-RPF fixtures come with elongated blowout toilet, oval lavatory, CW2 combined lavatory waste w/ cleanout, GWC gasketed waste connection, and 4-point mounting. The ECF-1546- 150-RPF replacement combination fixture can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are concealed within the vandal-resistant, stainless steel cabinet. A removable access panel attached w/ security screws allows access to the gasketed waste connection. -
Replacement: Floor Mounted, Wall Outlet, Combination Lavatory/Toilet Unit for Super Secur A-150
The Willoughby Floor Mounted, Wall Outlet Combination Lavatory/Toilet Unit (ECW-1546-150-RPF) is a single-user replacement fixture for use in security environments with an accessible mechanical chase. Designed as a direct replacement for the discontinued Super Secur A-150. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ECW-1546- 150-RPF fixtures come with elongated blowout toilet, oval lavatory, CW2 combined lavatory waste w/ cleanout, GWC gasketed waste connection, and 4-point mounting. The ECW-1546- 150-RPF replacement combination fixture can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are concealed within the vandal-resistant, stainless steel cabinet. -
Replacement: Stainless Steel, Front Mounted, Floor Outlet, Floor Mounted, Siphon Jet Series Toilet (10″ Rough-in)
The Willoughby ETF‐1490‐FM‐10-FA Stainless steel, front mounted, floor outlet, floor mounted, siphon jet series toilet (10" Rough-in) is a single‐user fixture for use in security environments where a mechanical chase is either non‐existent or difficult to access. Fixtures are all‐welded, fabricated from 14-gauge, Type 304 stainless steel polished to a #4 satin finish. The toilet can be anchored through the front and floor mounting flanges (anchoring hardware by others). All connections between the water closet and outside plumbing are made at the bottom and rear or top (depending on inlet location). The ETF-1490-FM stainless steel toilet can be supplied with a a variety of optional features (valves, controls, plumbing, etc.). The ETF‐1490‐FM‐10-FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option. -
Replacement: Stainless Steel, Front Mounted, Floor Outlet, Floor Mounted, Siphon Jet Series Toilet (12″ Rough-in)
The Willoughby ETF‐1490‐FM‐12-FA Stainless steel, front mounted, floor outlet, floor mounted, siphon jet series toilet (12" Rough-in) is a single‐user fixture for use in security environments where a mechanical chase is either non‐existent or difficult to access. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETF‐1490‐FM‐12-FA fixtures come with an elongated siphon jet toilet bowl with anchoring through the front and through the floor mounting flanges (anchoring hardware by others). The ETF‐1490‐FM‐12-FA toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal‐resistant, stainless steel toilet. The ETF‐1490‐FM‐12-FA toilet fixture meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option. -
Replacement: Stainless Steel, Floor Outlet, Off-Wall Mounted, Siphon Jet Series Toilet
The Willoughby ETF-1490-OW Stainless steel, floor outlet, off-wall mounted, siphon jet series toilet s a single-user fixture for use in security environments without a mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. This rear flush toilet is anchored through the floor mounting flanges (anchoring hardware by others). The ETW‐1490‐ES toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and top of the vandal‐resistant, stainless steel toilet. This toilet model meets all applicable ADA, CBC, UFAS, and ANSI accessibility guidelines when ordered with the “HC” (18” Seat Height, Handicap‐ADA Compliant) option. -
Replacement: Stainless Steel, Wall Outlet, Floor Mounted, Blowout Series Toilet
The Willoughby ETW-1490-FM-RPF Replacement, floor mounted, wall outlet, blowout series toilet is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW-1490-FM-RPF fixtures come with an elongated blowout toilet bowl, GWC gasketed waste connection, and 4-point floor mounting (2 in-wall, 2 in-floor). The ETW-1490-FM-RPF replacement toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet. -
Replacement: Stainless Steel, Rear Mounted, Wall Outlet, Floor Mounted, Siphon Jet Series Toilet
The Willoughby ETWS-1490-FM-RPF Replacement, floor mounted, wall outlet, siphon jet series toilet is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETWS-1490-FM-RPF fixtures come with an elongated siphon jet toilet bowl, GWC gasketed waste connection, and 4-point floor mounting (2 in-wall, 2 in-floor). The ETWS-1490-FM-RPF replacement toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet. -
Replacement: Stainless Steel, Carrier Mounted (3-bolt), Wall Outlet, Blowout Series Toilet
The Willoughby ETW-1490-CM-RPF Replacement, carrier mounted (3-bolt), wall outlet, blowout series toilet is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETW-1490-CM-RPF fixtures come with an elongated blowout toilet bowl, GWC gasketed waste connection, and standard 3-bolt blowout carrier mounting. The ETW-1490-CM-RPF replacement toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet. -
Replacement: Stainless Steel, Carrier Mounted (4-bolt), Wall Outlet, Siphon Jet Series Toilet
Willoughby's ETWS-1490-CM-RPF Replacement, carrier mounted (4-bolt), wall outlet, siphon jet series toilet is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ETWS-1490-CM-RPF fixtures come with an elongated siphon jet toilet bowl, GWC gasketed waste connection, and standard 4-bolt siphon jet carrier mounting. The ETWS-1490-CM-RPF replacement toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel toilet. -
Detox Toilet
The Willoughby FD‐1400 Detox Toilet is a built‐in fixture for use in security environments that would be unsuitable for a conventional‐style toilet. These can include detoxification cells, safety cells, isolation cells, etc. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard FD‐1400 fixtures come with a 14” dia. round blowout toilet bowl and removable 7 gauge top grate (fastened with security screws). Fixture can be configured with or without a 1” welded perimeter flange, depending on installation. The FD‐1400 toilet can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the vandal‐resistant, stainless steel toilet are concealed.
