ADA Compliant
Showing 1–64 of 110 results
-
WELS-2230 Envy Series Single Station Solid Surface Lavatory System
The Willoughby WELS-2230 Envy Series Single Station Solid Surface Lavatory System is a contemporary, single-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WELS-2230 fixture comes with a contoured single-user lavatory basin, drain grate assembly, and preassembled stainless steel mounting pedestal with removable shroud and mounting backplate (anchoring hardware and adequate backing by others). The WELS-2230 lavatory system can be supplied with optional faucet hole drilling and/or a wall-mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WELS-2230 Envy Series Lavatory System are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WELS-2260 Envy Series Two Station Solid Surface Lavatory System
The Willoughby WELS-2260 Envy Series Two Station Solid Surface Lavatory System is a contemporary, multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WELS-2260 fixtures come with a contoured multi-user lavatory basin, drain grate assembly, and preassembled stainless steel mounting pedestal with removable shroud and mounting backplate (anchoring hardware and adequate backing by others). The WELS-2260 lavatory system can be supplied with optional faucet hole drilling and/or a wall-mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WELS-2260 Envy Series Lavatory System are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WELS-2290 Envy Series Three Station Solid Surface Lavatory System
The Willoughby WELS-2290 Envy Series Three Station Solid Surface Lavatory System is a contemporary, multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WELS-2290 fixtures come with a contoured multi-user lavatory basin, drain grate assembly, and preassembled stainless steel mounting pedestal with removable shroud and mounting backplate (anchoring hardware and adequate backing by others). The WELS-2290 lavatory system can be supplied with optional faucet hole drilling and/or a wall-mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WELS-2290 Envy Series Lavatory System are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WAW-2311 AquaWave® Single Station Solid Surface Lavatory System
The Willoughby WAW-2311 AquaWave® Single Station Solid Surface Lavatory System is a single-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAW-2311 fixtures come with a contoured single-user lavatory basin; drain grate assembly; selected valve, control, and plumbing; preassembled stainless steel mounting pedestal; and galvanized steel mounting backplate (anchoring hardware and adequate backing by others). The WAW-2311 lavatory system can be supplied with an optional liquid soap dispenser (installed by others). All connections between the outside plumbing and the WAW-2311 AquaWave® Lavatory System are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WAW-2311-DMF AquaWave® Single Station Solid Surface Lavatory System for (DMF) Deck Mounted Faucets
The Willoughby WAW-2311-DMF AquaWave® Single Station Solid Surface Lavatory System for Deck Mounted Faucets is a single-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAW-2311-DMF fixtures come with a contoured single-user lavatory basin, drain grate assembly, preassembled stainless steel mounting pedestal, and galvanized steel mounting backplate (anchoring hardware and adequate backing by others). The WAW-2311-DMF lavatory system can be supplied with optional faucet hole drilling and/or a liquid soap dispenser (installed by others). All connections between the outside plumbing and the WAW-2311-DMF AquaWave® Lavatory System are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WAW-2322 AquaWave® Two Station Solid Surface Lavatory System
The Willoughby WAW-2322 AquaWave® Two Station Solid Surface Lavatory System is a multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAW-2322 fixtures come with a contoured multi-user lavatory basin; drain grate assemblies; selected valve, controls, and plumbing; preassembled stainless steel mounting pedestal; and galvanized steel mounting backplate (anchoring hardware and adequate backing by others). The WAW-2322 lavatory system can be supplied with optional liquid soap dispensers and/or wall-mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WAW-2322 AquaWave® Lavatory System are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WAW-2322-DMF AquaWave® Two Station Solid Surface Lavatory System for (DMF) Deck Mounted Faucets
The Willoughby WAW-2322-DMF AquaWave® Two Station Solid Surface Lavatory System for Deck Mounted Faucets is a multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAW-2322-DMF fixtures come with a contoured multi-user lavatory basin, drain grate assemblies, pre-assembled stainless steel mounting pedestal, and galvanized steel mounting backplate (anchoring hardware and adequate backing by others). The WAW-2322-DMF lavatory system can be supplied with optional faucet hole drilling, liquid soap dispensers, and/or a wall-mounted stainless steel kick plate (all installed by others). All connections between the outside plumbing and the WAW-2322-DMF AquaWave® Lavatory System are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WAW-2333 AquaWave® Three Station Solid Surface Lavatory System
The Willoughby WAW-2333 AquaWave® Three Station Solid Surface Lavatory System is a multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAW-2333 fixtures come with a contoured multi-user lavatory basin; drain grate assemblies; selected valve, controls, and plumbing; preassembled stainless steel mounting pedestal; and galvanized steel mounting backplate (anchoring hardware and adequate backing by others). The WAW-2333 lavatory system can be supplied with optional liquid soap dispensers and/or wall-mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WAW-2333 AquaWave® Lavatory System are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WAW-2333-DMF AquaWave® Three Station Solid Surface Lavatory System for (DMF) Deck Mounted Faucets
The Willoughby WAW-2333-DMF AquaWave® Three Station Solid Surface Lavatory System for Deck Mounted Faucets is a multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAW-2333-DMF fixtures come with a contoured multi-user lavatory basin, drain grate assemblies, pre-assembled stainless steel mounting pedestal, and galvanized steel mounting backplate (anchoring hardware and adequate backing by others). The WAW-2333-DMF lavatory system can be supplied with optional faucet hole drilling, liquid soap dispensers, and/or a wall-mounted stainless steel kick plate (all installed by others). All connections between the outside plumbing and the WAW-2333-DMF AquaWave® Lavatory System are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
CWSMS-ADA Series ADA-Compliant Surface-Mounted Wall Shower
The Willoughby CWSMS-ADA Series ADA-Compliant Surface-Mounted Wall Shower is a single-user fixture for use in commercial environments with or without an accessible mechanical chase. Sloped-top CWSMS-ADA shower fixtures are fabricated from riveted 18 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CWSMS-ADA fixtures come with a hand held Flexshower head, 24” Slide Bar, selected valve assembly, with anchoring through the included Z-clip and mounting flange (anchoring hardware and adequate backing by others). The CWSMS-ADA shower can be supplied with a variety of optional features including: valves, controls, plumbing, etc., all factory-installed within the shower fixture (unless noted). All connections between the outside plumbing and the fixture are made within the vandal-resistant, stainless steel cabinet. The CWSMS-ADA shower fixture meets all ADA accessibility guidelines when mounted at the correct applicable height above the finished floor. -
CWSMS-ADA-WH Series Wide Housing ADA-Compliant Surface Mounted Wall Shower
The Willoughby CWSMS-ADA-WH Wide Housing, ADA-Compliant, Surface Mounted Wall Shower is a single-user fixture for use in commercial environments with or without an accessible mechanical chase. Sloped-top CWSMS-ADA-WH wide housing shower fixtures are fabricated from riveted 18 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CWSMS-ADA-WH fixtures come with two selected shower heads and valve assembly, with anchoring through the included Z-clip and mounting flange (anchoring hardware and adequate backing by others). The CWSMS-ADA-WH shower can be supplied with a variety of optional features including: valves, controls, plumbing, etc., all factory-installed within the shower fixture (unless noted). All connections between the outside plumbing and the fixture are made within the vandal-resistant, stainless steel cabinet. The CWSMS-ADA-WH shower fixture meets all ADA accessibility guidelines when mounted at the correct applicable height above the finished floor. -
LRBHL-2220 Ligature-Resistant Solid Surface, Behavioral Health Lavatory (for Deck Mounted Faucet)
The Willoughby LRBHL-2220 Ligature-Resistant Solid Surface Behavioral Health Lavatory (for Deck Mounted Faucet) is a single-user fixture for vandal-resistant behavioral health environments. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. The rounded lavatory has been thoughtfully designed to minimize potential ligature points. Standard LRBHL-2220 fixtures shall be supplied with ligature-resistant drain and tailpiece. Fixtures with optional LRFC faucet shall be furnished with integral checkstop, flexible supply hoses, control valve, and valve power supply. An optional in-line thermostatic mixing valve is also available. All connections between the outside plumbing and the LRBHL-2220 behavioral health lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, TAS, UFAS, CBC, and ANSI accessibility guidelines when mounted at the correct, applicable rim height above the finished floor. A removable trap cover attached with security screws allows access to all fixture plumbing and mounting points inside. -
LRBCL-2030 Ligature-Resistant Solid Surface, Behavioral Health Corner Lavatory (for Deck Mounted Faucet)
The Willoughby LRBCL-2030 Ligature-Resistant Solid Surface Behavioral Health Corner Lavatory (for Deck Mounted Faucet) is a single-user fixture for vandal-resistant behavioral health environments. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. The rounded lavatory has been thoughtfully designed to minimize potential ligature points. Standard LRBCL-2030 fixtures shall be supplied with ligature-resistant drain and tailpiece. Fixtures with optional LRFC faucet shall be furnished with integral checkstop, flexible supply hoses, control valve, and valve power supply. An optional in-line thermostatic mixing valve is also available. All connections between the outside plumbing and the LRBCL-2030 behavioral health lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA, TAS, UFAS, CBC, and ANSI accessibility guidelines when mounted at the correct, applicable rim height above the finished floor. A removable trap cover attached w/ security screws allows access to all fixture plumbing and mounting points inside. -
LRBHL-2320 Ligature-Resistant Solid Surface, Behavioral Health Lavatory
The Willoughby LRBHL-2320 Ligature-Resistant Solid Surface Behavioral Health Lavatory is a single-user fixture for vandal-resistant behavioral health environments. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard LRBHL-2320 fixtures come with a contoured lavatory basin; drain assembly; selected valve, control, and plumbing; and inline thermostatic mixing valve; with anchoring through the pre-assembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). The rounded lavatory has been thoughtfully designed to minimize potential ligature points. All connections between the outside plumbing and the LRBHL-2320 behavioral health lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached with security screws allows access to all fixture plumbing and mounting points inside. -
Stainless Steel Ligature-resistant Rear Mounted Behavioral Lavatory
The Willoughby WBLS-2018-HC Stainless Steel Ligature-resistant Rear Mounted Behavioral Lavatory is a single-user fixture for use in security and behavioral environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBLS-2018-HC fixtures come with a rectangular-shaped lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The sloped top, angular profile lavatory has been thoughtfully designed to minimize potential ligature points. The WBLS-2018-HC lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The WBLS-2018-HC lavatory fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Ligature-resistant Front Mounted Behavioral Lavatory
The Willoughby WBLS-2018-HC-FA Stainless Steel Ligature-resistant Front Mounted Behavioral Lavatory is a single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBLS-2018- HC-FA fixtures come with an oval-shaped lavatory bowl, 1-1/2” F.I.P. slip-joint P-trap, with anchoring through the back-plate mounting holes (anchoring hardware by others). The sloped top, angular profile lavatory has been thoughtfully designed to minimize potential ligature points. The WBLS-2018- HC-FA lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The WBLS-2018- HC-FA lavatory fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
ASWLDR-1922 Ligature-Resistant Stainless Steel Behavioral Health Lavatory
The Willoughby ASWLDR-1922 Ligature-Resistant Stainless Steel Behavioral Health Lavatory is a single-user fixture for vandal-resistant behavioral health environments. Willoughby stainless steel lavatory fixtures are all-welded, fabricated from T304 stainless steel, polished to a #4 satin finish. Standard ASWLDR-1922 fixtures come with a round lavatory basin with slow drain; selected valve, control, and plumbing; and inline thermostatic mixing valve; with anchoring through the heavy gauge steel backplate (anchoring hardware and adequate backing by others). The rounded lavatory has been thoughtfully designed to minimize potential ligature points. All connections between the outside plumbing and the ASWLDR-1922 behavioral health lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached with security screws allows access to all fixture plumbing and mounting points inside. -
ASWLDR-1922-DMF Ligature-Resistant Stainless Steel Behavioral Health Lavatory
The Willoughby ASWLDR-1922-DMF Ligature-Resistant Stainless Steel Behavioral Health Lavatory is a single-user fixture for vandal-resistant behavioral health environments. Willoughby stainless steel lavatory fixtures are all-welded, fabricated from T304 stainless steel, polished to a #4 satin finish. Standard ASWLDR-1922-DMF fixtures come with a round lavatory basin with slow drain; selected valve, control, and plumbing; and inline thermostatic mixing valve; with anchoring through the heavy gauge steel backplate (anchoring hardware and adequate backing by others). The rounded lavatory has been thoughtfully designed to minimize potential ligature points. All connections between the outside plumbing and the ASWLDR-1922-DMF behavioral health lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached w/ security screws allows access to all fixture plumbing and mounting points inside. -
WBIS-ADA Series ADA-Compliant Rear Mounted Built-In Shower
The Willoughby WBIS-ADA Rear Mounted Built-in Shower is a single-user fixture for use in security environments with an accessible mechanical chase. Shower plates are fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBIS-ADA fixtures come with an (2) shower heads, (2) component shower plates, and standard 4-point mounting. The WBIS-ADA built-in shower can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear of the vandal-resistant, stainless steel plates. The WBIS-ADA built-in shower fixture meets all ADA accessibility guidelines when all components are mounted at the correct applicable heights above the finished floor (installation by others). -
WBIS-FA-ADA Series ADA-Compliant Front Mounted Built-In Shower
The Willoughby WBIS-FA-ADA Compliant, Front Mounted, Built-in Shower is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Willoughby front mounted shower plates are fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBIS-FA-ADA fixtures come with two selected shower head and one selected valve assembly, with anchoring through the component shower plates (2-3 plates included, anchoring and adequate backing by others). The WBIS-FA-ADA built-in shower can be supplied with a variety of optional features including: valves, controls, plumbing, in-wall accessories, etc. All connections between the outside plumbing and the fixture are made behind the vandal-resistant, stainless steel plates. The WBIS-FA-ADA built-in shower fixture meets all ADA accessibility guidelines when all components are mounted at the correct applicable heights above the finished floor (installation by others). -
WBS-ADA-WH Series Ligature-Resistant ADA-Compliant Wide Housing Surface-Mounted Behavioral Wall Shower
The Willoughby WBS-ADA-WH Ligature-Resistant, Wide Housing, ADA-Compliant, Surface-Mounted Wall Shower is a single-user fixture for use in commercial environments without an accessible mechanical chase. Sloped-top WBS-ADA-WH shower fixtures are fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBS-ADA-WH fixtures come with (2) selected shower heads and valve assembly, with anchoring through the included Z-clip and mounting flange (anchoring hardware and adequate backing by others). The WBS-ADA-WH shower can be supplied with a variety of optional features including: valves, controls, plumbing, etc., all factory-installed within the shower fixture (unless noted). All connections between the outside plumbing and the fixture are made within the vandal-resistant, stainless steel cabinet. -
AS-S3060ADA AquaSurf® Solid Surface 30×60 ADA-Compliant Roll-in Shower Base with Integral Rear Trench Drain
The Willoughby AS-S3060ADA AquaSurf® Solid Surface 30x60 ADA-Compliant Roll-in Shower Base, with Integral Rear Trench Drain, is a single-user fixture for use in commercial, healthcare, and other environments. Willoughby AquaSurf® shower bases are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard AS-S3060ADA shower base features include integrally molded underside bracing; sloped, textured floor; integral perimeter flanges, threshold, and curb; heavy gauge stainless steel trench grate; and 2” O.D. no-hub drain. The rear drain is available in Left, Center, or Right configurations. The AS-S3060ADA shower bases can be supplied with optional color-matched, solid surface wall panel components (installation by others) for finishing a complete shower area enclosure. All connections between the outside plumbing and the AS-S3636ADA shower base are made underneath the fixture. -
AS-S3060ADAF AquaSurf® Solid Surface 30×60 ADA-Compliant Roll-in Shower Base with Integral Front Trench Drain
The Willoughby AS-S3060ADAF AquaSurf® Solid Surface 30x60 ADA-Compliant Roll-in Shower Base, with Integral Front Trench Drain, is a single-user fixture for use in commercial, healthcare, and other environments. Willoughby AquaSurf® shower bases are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard AS-S3060ADAF shower base features include integrally molded underside bracing; sloped, textured floor; integral perimeter flanges, threshold, and curb; heavy gauge stainless steel trench grate; and 2” O.D. no-hub drain. The front drain is available in Left, Center, or Right configurations. The AS-S3060ADAF shower bases can be supplied with optional color-matched, solid surface wall panel components (installation by others) for finishing a complete shower area enclosure. All connections between the outside plumbing and the AS-S3060ADAF shower base are made underneath the fixture. -
AS-S3636ADA AquaSurf® Solid Surface 36×36 ADA-Compliant Transfer Shower Base with Integral Rear Trench Drain
The Willoughby AS-S3636ADA AquaSurf® Solid Surface 36x36 ADA-Compliant Transfer Shower Base, with Integral Rear Trench Drain, is a single-user fixture for use in commercial, healthcare, and other environments. Willoughby AquaSurf® shower bases are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard AS-S3636ADA shower base features include integrally molded underside bracing; sloped, textured floor; integral perimeter flanges, threshold, and curb; heavy gauge stainless steel trench grate; and 2” O.D. no-hub drain. The rear drain is available in Left, Center, or Right configurations. The AS-S3636ADA shower bases can be supplied with optional color-matched, solid surface wall panel components (installation by others) for finishing a complete shower area enclosure. All connections between the outside plumbing and the AS-S3636ADA shower base are made underneath the fixture. -
AS-S3636ADAF AquaSurf® Solid Surface 36×36 ADA-Compliant Transfer Shower Base with Integral Front Trench Drain
The Willoughby AS-S3636ADAF AquaSurf® Solid Surface 36x36 ADA-Compliant Transfer Shower Base, with Integral Front Trench Drain, is a single-user fixture for use in commercial, healthcare, and other environments. Willoughby AquaSurf® shower bases are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard AS-S3636ADAF shower base features include integrally molded underside bracing; sloped, textured floor; integral perimeter flanges, threshold, and curb; heavy gauge stainless steel trench grate; and 2” O.D. no-hub drain. The front drain is available in Left, Center, or Right configurations. The AS-S3636ADAF shower bases can be supplied with optional color-matched, solid surface wall panel components (installation by others) for finishing a complete shower area enclosure. All connections between the outside plumbing and the AS-S3636ADAF shower base are made underneath the fixture. -
BWLDR-1922 Stainless Steel Bariatric Lavatory
The Willoughby BWLDR-1922 Stainless Steel Bariatric Lavatory is a single-user fixture for vandal-resistant bariatric health environments. This wall-mounted bariatric lavatory accommodates bariatric patients and can withstand a static downward force of 650 lbs. at the front edge of the lavatory with no permanent physical damage. The lavatory has a rounded integral sloped backsplash and rounded integral side splashes. The fixture is fabricated from 14-gauge, type 304 stainless steel. The construction is welded with removable a trap enclosure. The fixture exterior, including lavatory deck, basin, and trap enclosure, all have an antimicrobial gloss white powder coat enamel finish. A bare stainless steel lavatory basin with satin finish is optional. All connections between the outside plumbing and the BWLDR-1922 lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached with security screws allows access to all fixture plumbing and mounting points inside. -
WRS-ADA Series ADA-Compliant Rear Mounted Recessed Shower Panel
The Willoughby WRS-ADA Rear Mounted, Recessed Handicap Shower Panel is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WRS-ADA fixtures come with standard 8-point mounting. The WRS-ADA shower panel can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear of the vandal-resistant, stainless steel panel. The WRS-ADA meets all applicable ADA requirements when correctly mounted (installation by others). -
WRS-FA-ADA Series ADA-Compliant Front Mounted Recessed Shower Panel
The Willoughby WRS-FA-ADA Front Mounted, Recessed Handicap Shower Panel is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixture panels are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WRS-FA-ADA fixtures come with 18 gauge galvanized steel mounting frame (shipped separately). The WRS-FA-ADA shower panel can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within the vandal-resistant, stainless steel panel. Removable face panel attached with security screws allows access to all fixture plumbing and mounting points within. The WRS-FA-ADA meets all applicable ADA requirements when correctly mounted (installation by others). -
WRS-ADA-WH Series Wide Housing ADA-Compliant Rear Mounted Recessed Shower Panel
The Willoughby WRS-ADA-WH Rear Mounted, Recessed Handicap Shower Panel is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WRS-ADA-WH fixtures come with standard 8-point mounting. The WRS-ADA-WH shower panel can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear of the vandal-resistant, stainless steel panel. The WRS-ADA-WH meets all applicable ADA requirements when correctly mounted (installation by others). -
WRS-FA-ADA-WH Series Wide Housing ADA-Compliant Front Mounted Recessed Shower Panel
The Willoughby WRS-FA-ADA-WH Front Mounted, Recessed Handicap Shower Panel is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixture panels are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WRS-FA-ADA-WH fixtures come with a 18 gauge galvanized steel mounting frame (shipped separately). The WRS-FA-ADA-WH shower panel can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within the vandal-resistant, stainless steel panel. Removable face panel attached with security screws allows access to all fixture plumbing and mounting points within. The WRS-FA-ADA-WH meets all applicable ADA requirements when correctly mounted (installation by others). -
US/KS 3636-HC ADA-Compliant Transfer Cabinet Shower
Willoughby US/KS-3636-HC Cabinet Handicap Accessible Shower Units are ADA-compliant single-user, barrier free shower stall fixtures for use in security environments with an accessible mechanical chase. Unitized “US” handicap accessible shower units are all-welded, fabricated from 14 gauge and 11 gauge, Type 304 stainless steel polished to a #4 satin finish, with slip-resistant glass-bead-blast finish floor; fixtures are also available in Knockdown “KS” configuration (non-welded). Standard US/KS-3636-HC Handicap Cabinet Showers come with an integral ICD inside caulk drain (2”), removable strainer, GB3318 horizontal L-shape grab bar, GB24V vertical 24” grab bar, and FSS fold-up shower seat. The US/KS-3636-HC Handicap Cabinet Shower can be supplied with a variety of optional features including: valves, controls, plumbing, chase orientation, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. The US/KS-3636-HC Handicap Cabinet Shower meets all applicable ADA, UFAS, and ANSI accessibility guidelines. -
US/KS-3636-HC-FA ADA-Compliant Front Access Transfer Cabinet Shower
The Willoughby US/KS-3636-HC-FA Front Access Handicap Cabinet Shower is an ADA-compliant single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Unitized “US” fixtures are all-welded, fabricated from 14 gauge and 11 gauge, Type 304 stainless steel polished to a #4 satin finish, with slip-resistant glass-bead-blast finish floor; fixtures are also available in Knockdown “KS” configuration (non-welded). Standard US/KS-3636-HC-FA Handicap Cabinet Showers come with an integral ICD inside caulk drain (2”), removable strainer, GB3318 horizontal L-shape grab bar, GB24V vertical 24” grab bar, and FSS fold-up shower seat. The US/KS-3636-HC-FA Front Access Handicap Cabinet Shower can be supplied with a variety of optional features including: valves, controls, plumbing, exterior finish, etc. All connections between the outside plumbing and the fixture are made behind the vandal-resistant, stainless steel shower panel. Removable shower panel attached w/ security screws allows access to all the fixture plumbing within. The US/KS-3636-HC-FA Front Access Handicap Cabinet Shower meets all applicable ADA, UFAS, and ANSI accessibility guidelines. -
US/KS-3660-HC ADA-Compliant Roll-In Cabinet Shower
Willoughby US/KS-3660-HC Roll-In Cabinet Handicap Showers are ADA-compliant single-user roll in showers for wheelchairs in security environments with an accessible mechanical chase. Unitized “US” fixtures are all-welded, fabricated from 14 gauge and 11 gauge, Type 304 stainless steel polished to a #4 satin finish, with slip-resistant glass-bead- blast finish floor; fixtures are also available in Knockdown “KS” configuration (non-welded). Standard US/KS-3660- HC Handicap Cabinet Showers come with an integral ICD inside caulk drain (2”), removable strainer, GB24 horizontal 24” grab bar, GB30 horizontal 30” grab bar, GB24V vertical 24” grab bar, and FSS fold-up shower seat. The US/KS-3660- HC Roll-In Handicap Cabinet Shower can be supplied with a variety of optional features including: valves, controls, plumbing, chase orientation, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. The US/KS-3660- HC Roll-In Handicap Cabinet Shower meets all applicable ADA, UFAS, and ANSI accessibility guidelines when equipped with shower valve controls mounted on the Back Wall of the fixture, adjacent to the FSS fold-up shower seat. -
US/KS-3660-HC-FA ADA-Compliant Front Access Roll-In Cabinet Shower
The Willoughby US/KS-3660-HC-FA Roll-In Front Access Cabinet ADA Compliant Shower is a single-user fixture with a handicap shower base, intended for use in security environments where a mechanical chase is either non-existent or difficult to access. Unitized “US” fixtures are all-welded, fabricated from 14 gauge and 11 gauge, Type 304 stainless steel polished to a #4 satin finish, with slip-resistant glass-bead- blast finish floor; fixtures are also available in Knockdown “KS” configuration (non-welded). Standard US/KS-3660- HC-FA Handicap Cabinet Showers come with an integral ICD inside caulk drain (2”), removable strainer, GB24 horizontal 24” grab bar, GB30 horizontal 30” grab bar, GB24V vertical 24” grab bar, and FSS fold-up shower seat. The US/KS-3660- HC-FA Roll-In Front Access Handicap Cabinet Shower can be supplied with a variety of optional features including: valves, controls, plumbing, exterior finish, etc. All connections between the outside plumbing and the fixture are made behind the vandal-resistant, stainless steel shower panel. Removable shower panel attached w/ security screws allows access to all the fixture plumbing within. The US/KS-3660- HC-FA Roll-In Front Access Handicap Cabinet Shower meets all applicable ADA, UFAS, and ANSI accessibility guidelines when equipped with shower valve controls mounted on the Back Wall of the fixture, adjacent to the FSS fold-up shower seat. -
Stainless Steel Single Person Front Mounted Washout Flush Straddle Urinal
The Willoughby UW-1412-WO-FA Stainless Steel Single Person Front Mounted Washout Flush Straddle Urinal is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1412- WO-FA fixtures come with full perimeter flushing rim, 1-1/2” F.I.P. slip-joint P-trap, removable P-trap enclosure, with anchoring through the front flanges anchoring hardware by others). The UW-1412- WO-FA urinal can be supplied with a variety of optional features including: valves controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal-resistant, stainless steel urinal. The UW-1412- WO-FA urinal fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
AquaDeck 2230 Series Square Front (1-1/2″) Solid Surface Lavatory Deck
The Willoughby WAD-2230 AquaDeck Square Front (1-1/2”) Lavatory Deck is a single- or multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaDeck lavatory decks are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. The WAD-2230 deck can be ordered with up to four separate, integral wash stations, featuring a 1-1/2” square-eased front edge and straight sides. Standard WAD-2230 fixtures come with oval lavatory bowls and integral overflows, with the deck designed to be supported by an in-wall carrier system (in-wall carrier, anchoring hardware, and adequate backing by others). Heavy gauge, Type 304 stainless steel mounting brackets are an available manufacturer option. The WAD-2230 square front lavatory deck can be supplied with optional features, including: faucet hole drilling, mounting brackets, modular drain shrouds, etc. (installed by others). All connections between the outside plumbing and the WAD-2230 lavatory deck are made underneath, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable deck rim height above the finished floor. -
AquaDeck 2235 Series Square Front (3″) Solid Surface Lavatory Deck
The Willoughby WAD-2235 AquaDeck Square Front (3”) Lavatory Deck is a single- or multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaDeck lavatory decks are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. The WAD-2235 deck can be ordered with up to four separate, integral wash stations, featuring a 3” square-eased front edge and straight sides. Standard WAD-2235 fixtures come with oval lavatory bowls and integral overflows, with the deck designed to be supported by an in-wall carrier system (in-wall carrier, anchoring hardware, and adequate backing by others). Heavy gauge, Type 304 stainless steel mounting brackets are an available manufacturer option. The WAD-2235 square front lavatory deck can be supplied with optional features, including: faucet hole drilling, mounting brackets, modular drain shrouds, etc. (installed by others). All connections between the outside plumbing and the WAD-2235 lavatory deck are made underneath, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable deck rim height above the finished floor. -
15″ Wide ADA-Compliant Combination Lavatory/Toilet Unit for 45° Chase Wall
The Willoughby 15" Wide Combination Lavatory/Toilet Unit (1545-Series) is an ADA-compliant single-user fixture for use in security environments with 45-degree mechanical chases. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 1545-Series fixtures come with elongated blowout toilet, rectangular lavatory, integral grab bar, and standard 4-point mounting. The 15" Wide Handicap/ADA Combi fixture can be supplied with a variety of optional features including valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The 1545-Series Combination fixture meets all applicable ADA, UFAS, and ANSI accessibility guidelines; a CBC-compliant model 1545 is also available. -
ASFVC-ADA Ligature-Resistant ADA Compliant Flush Valve Cover
The Willoughby ASFVC-ADA Ligature-Resistant ADA-compliant Flush Valve Cover is a fabricated 14 gauge, Type 304 stainless steel accessory, designed to conceal exposed top spud toilet plumbing while meeting ADA requirements for clear space around toilet compartment grab bars (sold and installed separately). Stainless steel security screws are typically provided supplied with the sloped-top ASFVC-ADA cover, with any needed wall anchors supplied by others. The flush valve actuator can be mounted on either the left-front or right-front of the cover, with an included hole-cover plate to cover the unused push button hole. The ASFVC-ADA flush valve cover can be specified with any size flush valve actuator hole, and the cover can come in standard #4 stainless steel finish or DC white powder coat finish. -
LRFVC-ADA Ligature-Resistant ADA Compliant Flush Valve Cover
The Willoughby LRFVC-ADA Ligature-Resistant ADA-compliant Flush Valve Cover is a fabricated 14 gauge, Type 304 stainless steel accessory, designed to conceal exposed top spud toilet plumbing while meeting ADA requirements for clear space around toilet compartment grab bars (sold and installed separately). Stainless steel security screws are typically provided supplied with the sloped-top LRFVC-ADA cover, with any needed wall anchors supplied by others. The flush valve actuator can be mounted on either the left-front or right-front of the cover, with an included hole-cover plate to cover the unused push button hole. The LRFVC-ADA flush valve cover can be specified with any size flush valve actuator hole, and the cover can come in standard #4 stainless steel finish or DC white powder coat finish. -
Stainless Steel 18″ Wide Rear Mounted Handicap-ADA Compliant Lavatory
The Willoughby HS-1013-46-HC Stainless Steel 18" Wide Rear Mounted Handicap-ADA Compliant Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-46-HC fixtures come with an oval-shaped lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The HS-1013-46-HC lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The HS-1013-46-HC lavatory fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Handicap-ADA Compliant Rear Mounted Drinking Fountain
The Willoughby DF‐1015‐96‐HC Stainless Steel Handicap-ADA Compliant, Rear Mounted Drinking Fountain is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard DF‐1015‐96‐HC fixtures come with an oval‐shaped basin, CDB drinking fountain bubbler, PSL1 single temperature non‐metering valve, EB elbow waste (1‐1/2” F.I.P.), and standard 4‐point mounting. The DF‐1015‐96‐HC drinking fountain can be supplied with optional features including: plumbing, mounting guides, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal‐resistant, stainless steel cabinet. The DF‐1015‐96‐HC drinking fountain meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (installation by others). -
Stainless Steel 18″ Wide Front Mounted Handicap-ADA Compliant Lavatory
The Willoughby HS-1013-46-HC-FA Stainless Steel 18" Wide Front Mounted Handicap-ADA Compliant Lavatory is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-46-HC- FA fixtures come with an oval-shaped lavatory bowl, 1-1/2” F.I.P. slip-joint P-trap, with anchoring through the included Z-clip and mounting holes (anchoring hardware by others). The HS-1013-46-HC-FA lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The HS-1013-46-HC-FA lavatory fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Handicap-ADA Compliant Front Mounted Drinking Fountain
The Willoughby DF‐1015‐96‐HC‐FA Stainless Steel Handicap‐ADA‐Compliant, Front Mounted Drinking Fountain is a single‐user fixture for use in security environments where a mechanical chase is either non‐existent or difficult to access. Fixtures are all‐welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard DF‐1015‐96‐HC fixtures come with an oval‐shaped basin, CDB drinking fountain bubbler, PSL1 single temperature non‐metering valve, RPT slip‐joint P‐trap (1‐1/2” F.I.P.), with anchoring through the included Z‐clip and mounting holes (anchoring hardware by others). The DF‐1015‐96‐HC‐FA drinking fountain can be supplied with optional features including: plumbing, mounting guides, etc. All valves and plumbing will be factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal‐resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The DF‐1015‐96‐HC‐FA drinking fountain meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (installation by others). -
BWLDR-1922-DMF Stainless Steel Bariatric Lavatory (for Deck Mounted Faucet)
The Willoughby BWLDR-1922-DMF Stainless Steel Bariatric Lavatory is a single-user fixture for vandal-resistant bariatric health environments. This wall-mounted bariatric lavatory accommodates bariatric patients and can withstand a static downward force of 650 lbs. at the front edge of the lavatory with no permanent physical damage. The lavatory has a rounded integral sloped backsplash and rounded integral side splashes. The fixture is fabricated from 14-gauge, type 304 stainless steel. The construction is welded with removable a trap enclosure. The fixture exterior, including lavatory deck, basin, and trap enclosure, all have an antimicrobial gloss white powder coat enamel finish. A bare stainless steel lavatory basin with satin finish is optional. All connections between the outside plumbing and the BWLDR-1922-DMF lavatory are concealed within the stainless steel pedestal, and the fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. A removable trap cover attached with security screws allows access to all fixture plumbing and mounting points inside. -
BHS-3123 ADA-Compliant Solid Surface Bariatric Sink (Lavatory)
The Willoughby BHS-3123 ADA-Compliant Solid Surface Bariatric Sink (Lavatory) is a single-user solid surface sink fixture for use in bariatric health environments. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard BHS-3123 fixtures come with a contoured D-shaped lavatory basin; antimicrobial drain assembly w/ offset tailpiece; 1.5 GPM, 4CC, 8” gooseneck faucet and plumbing; and preassembled stainless steel mounting pedestal w/ solid polymer panel cladding. Standard anchoring is through the preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). The rounded lavatory has been designed to withstand a static edge load of 1,000 lbs. to accommodate bariatric healthcare patients. The BHS-3123 bariatric lavatory can be ordered with a variety of optional features including: alternative faucets, faucet hole drilling, plumbing, etc. All connections between the outside plumbing and the BHS-3123 bariatric healthcare lavatory are concealed within the stainless steel pedestal, with a secure access panel attached w/ security screws allowing access to all fixture plumbing and mounting points inside. The BHS-3123 fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
ES-1015-HC Handicap Stainless Steel Commercial Lavatory
The Willoughby ES-1015- HC Stainless Steel Handicap Commercial Lavatory is a single-user fixture for vandal-resistant commercial use. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ES-1015- HC fixtures come with a rectangular-shaped lavatory bowl, 4” x 1-1/2” O.D. tailpiece, with anchoring through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The ES-1015- HC lavatory can be supplied with a variety of optional features including: faucet hole punching, valves, controls, plumbing, etc. (installed by others). All connections between the outside plumbing and the fixture are made underneath the vandal-resistant, stainless steel fixture. The ES-1015- HC lavatory fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WEL-2311 AquaSurf® Single Station Executive Lavatory
The Willoughby WEL-2311 AquaSurf® Executive Lavatory is a single-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WEL-2311 fixtures come with a rounded rectangular-shaped lavatory bowl, with anchoring through the included heavy gauge, Type 304 stainless steel mounting bracket (anchoring hardware and adequate backing by others). The WEL-2311 lavatory can be supplied with optional faucet hole punching and TE trap enclosure (installed by others). All connections between the outside plumbing and the WEL-2311 Executive Lavatory are made underneath, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
CEL Multi-station Stainless Steel Lavatory
The Willoughby CEL Multi-station Stainless Steel Lavatory is a multi-user fixture for vandal-resistant commercial use. All CEL lavatory fixtures are fabricated from 14 gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard CEL fixtures come with an integral basin/pedestal; drain assembly; selected valve, controls, and plumbing; and stainless steel trap enclosure (shroud). It can be specified in either Two Station (CEL-2817- 2) or Three Station (CEL-4818- 3) configurations, with an Adult ADA or Junior ADA (JR) rim height. Anchoring is through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The CEL lavatory can be supplied with optional DC white powder coat finish. All connections between the outside plumbing and the CEL lavatory are concealed within the stainless steel pedestal. The fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel 18″ Wide Rear Mounted Handicap-ADA Compliant Rectangular Bowl Lavatory
The Willoughby HS-1014-96-HC Stainless Steel 18" Rear Mounted, Handicap-ADA Compliant, Rectangular Bowl, Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1014-96-HC fixtures come with a rectangular-shaped lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The HS-1014-96-HC lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The HS-1014-96-HC lavatory fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Single Person Rear Mounted Washout Flush Straddle Urinal
The Willoughby UW-1412-WO Stainless Steel Single Person Rear Mounted Washout Flush Straddle Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1412- WO fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 4-point mounting. The UW-1412- WO urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. The UW-1412- WO urinal fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
CWLD Series Straight Front Stainless Steel Lavatory Deck
The Willoughby CWLD Straight Front Stainless Steel Lavatory Deck is a single- or multi-user fixture for vandal-resistant commercial use. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CWLD fixtures come with circular or oval lavatory bowls w/ OV overflows, elbow wastes w/ 1-1/2” O.D. connections, trap enclosure, with anchoring through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The CWLD lavatory deck can be supplied with a variety of optional features including: faucet hole punching, valves, controls, plumbing, etc. (installed by others). All connections between the outside plumbing and the fixture are made underneath the vandal-resistant, stainless steel fixture, within the standard trap enclosure/pipe shroud. The CWLD straight front lavatory deck meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel 18″ Wide Front Mounted Handicap-ADA Compliant Rectangular Bowl Lavatory
The Willoughby HS-1014-96-HC-FA Stainless Steel 18" Wide Front Mounted Handicap-ADA Compliant Rectangular Bowl Lavatory is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1014-96-HC-FA fixtures come with a rectangular-shaped lavatory bowl, 1-1/2” F.I.P. slip-joint P-trap, with anchoring through the included Z-clip and mounting holes (anchoring hardware by others). The HS-1014-96-HC-FA lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The HS-1014-96-HC-FA lavatory fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
CWLDR Series Round Front Stainless Steel Lavatory Deck
The Willoughby CWLDR Round Front Stainless Steel Lavatory Deck is a single- or multi-user fixture for vandal-resistant commercial use. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CWLDR fixtures come with circular lavatory bowls w/ OV overflows, elbow wastes w/ 1-1/2” O.D. connections, trap enclosure, with anchoring through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The CWLDR lavatory deck can be supplied with a variety of optional features including: faucet hole punching, valves, controls, plumbing, etc. (installed by others). All connections between the outside plumbing and the fixture are made underneath the vandal-resistant, stainless steel fixture, within the standard trap enclosure / pipe shroud. The CWLDR round front lavatory deck meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Single Person Rear Mounted Blowout Flush Straddle Urinal
The Willoughby UW-1412-BJ Stainless Steel Single Person Rear Mounted Blowout Flush Straddle Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1412- BJ fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 4-point mounting. The UW-1412-BJ urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. The UW-1412-BJ urinal fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Small Profile Handicap-ADA Compliant Front Access Drinking Fountain
The Willoughby DF-1812-FA Stainless Steel Small Profile Handicap-ADA Compliant, Front Access Drinking Fountain is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard DF-1812-FA fixtures come with a rounded rectangular basin, CDB drinking fountain bubbler, PSL1 single temperature non-metering valve, RPT slip-joint P-trap (1-1/2” F.I.P.), with anchoring through the included mounting plate (anchoring hardware by others). The DF-1812-FA drinking fountain can be supplied with optional features including: plumbing, mounting guides, etc. All valves and plumbing will be factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The DF-1812-FA drinking fountain meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor (installation by others). -
Stainless Steel Single Person Floor Mounted Stall Urinal
The Willoughby UF-1438 Stainless Steel Single Person Floor Mounted Stall Urinal is a single-user fixture for use in security environments with or without a mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UF-1438 fixtures come with full perimeter flushing rim, 2” caulk waste connection, flat strainer drain, with anchoring through the front flanges (anchoring hardware by others). The UF-1438 urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal-resistant, stainless steel urinal. The UF-1438 urinal fixture meets all applicable ADA and CBC accessibility guidelines. -
WAF-3300/3301 AquaFount® Three Station Solid Surface Washfountain
The Willoughby WAF-3300/3301 AquaFount® Three Station Solid Surface Washfountain is a multi-user solid surface fixture for vandal-resistant commercial use. It can be specified in either Floor Mounted (WAF-3300) or Wall Mounted (WAF-3301) configurations, with an Adult or Juvenile (JR) rim height. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-3300/3301 fixtures come with a contoured multi-user lavatory basin; drain grate assembly; selected valve, controls, and plumbing; and preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). The WAF-3300/3301 washfountain can be supplied with optional liquid soap dispensers. All connections between the outside plumbing and the WAF-3300/3301 AquaFount® washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WAF-4400/4401 AquaFount® Four Station Solid Surface Washfountain
The Willoughby WAF-4400/4401 AquaFount® Four Station Solid Surface Washfountain is a multi-user solid surface fixture for vandal-resistant commercial use. It can be specified in either Floor Mounted (WAF-4400) or Wall Mounted (WAF-4401) configurations, with an Adult or Juvenile (JR) rim height. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-4400/4401 fixtures come with a contoured multi-user lavatory basin; drain grate assembly; selected valve, controls, and plumbing; and preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). The WAF-4400/4401 washfountain can be supplied with optional liquid soap dispensers. All connections between the outside plumbing and the WAF-4400/4401 AquaFount® washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WAF-3603 AquaFount® Three Station Half Round 36″ Solid Surface Washfountain
The Willoughby WAF-3603 AquaFount® Three Station, Half Round, 36” Solid Surface Deep Bowl Washfountain is a multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-3603 fixtures come with a contoured multi-user lavatory basin; drain assembly; selected valve, controls, and plumbing; and preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). It can be specified with an Adult ADA or Junior ADA (JR) rim height. The WAF-3603 washfountain can be supplied with optional liquid soap dispensers and/or wall-mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WAF-3603 AquaFount® washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (excluding FO - Foot Operated valve models). -
WWF-3603 Three Station Half Round 36″ Stainless Steel Washfountain
The Willoughby WWF-3603 Three Station, Half Round, 36” Stainless Steel Deep Bowl Washfountain is a multi-user fixture for vandal-resistant commercial use. All WWF-3603 deep bowl washfountain fixtures are fabricated from heavy gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard WWF-3603 fixtures come with an integral, contoured, multi-user basin; drain assembly; selected valve, controls, and plumbing; solid surface head cover; and stainless steel mounting pedestal. It can be specified with an Adult ADA or Junior ADA (JR) rim height, with anchoring through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The WWF-3603 washfountain can be supplied with optional liquid soap dispensers and/or wall mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WWF-3603 washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (excluding FLR Floor Mounted and FO Foot Operated valve models). -
WWF-4203/4204 Three and Four Station Half Round 42″ Stainless Steel Washfountain
The Willoughby WWF-4203/4204 Three / Four Station, Half Round, 42” Stainless Steel Deep Bowl Washfountain is a multi-user fixture for vandal-resistant commercial use. All WWF-4203/4204 deep bowl washfountain fixtures are fabricated from heavy gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard WWF-4203/4204 fixtures come with an integral, contoured, multi-user basin; drain assembly; selected valve, controls, and plumbing; solid surface head cover; and stainless steel mounting pedestal. It can be specified in either Three Station (WWF-4203) or Four Station (WWF-4204) configurations, with an Adult ADA or Junior ADA (JR) rim height. Anchoring is through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The WWF-4203/4204 washfountain can be supplied with optional liquid soap dispensers and/or wall mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WWF-4203/4204 washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (excluding FLR Floor Mounted and FO Foot Operated valve models). -
WAF-5403/5404 AquaFount® Three / Four Station Half Round 54″ Solid Surface Washfountain
The Willoughby WAF-5403/5404 AquaFount® Three / Four Station, Half Round, 54” Solid Surface Deep Bowl Washfountain is a multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-5403/5404 fixtures come with a contoured multi-user lavatory basin; drain assembly; selected valve, controls, and plumbing; and preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). It can be specified in either Three Station (WAF-5403) or Four Station (WAF-5404) configurations, with an Adult ADA or Junior ADA (JR) rim height. The WAF-5403/5404 washfountain can be supplied with optional liquid soap dispensers and/or wall-mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WAF-5403/5404 AquaFount® washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (excluding FO - Foot Operated valve models). -
WWF-5403/5404 Three and Four Station Half Round 54″ Stainless Steel Washfountain
The Willoughby WWF-5403/5404 Three / Four Station, Half Round, 54” Stainless Steel Deep Bowl Washfountain is a multi-user fixture for vandal-resistant commercial use. All WWF-5403/5404 deep bowl washfountain fixtures are fabricated from heavy gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard WWF-5403/5404 fixtures come with an integral, contoured, multi-user basin; drain assembly; selected valve, controls, and plumbing; solid surface head cover; and stainless steel mounting pedestal. It can be specified in either Three Station (WWF-5403) or Four Station (WWF-5404) configurations, with an Adult ADA or Junior ADA (JR) rim height. Anchoring is through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The WWF-5403/5404 commercial hand sink can be supplied with optional liquid soap dispensers and/or wall mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WWF-5403/5404 washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (excluding FLR Floor Mounted and FO Foot Operated valve models).
