Shop
Showing 129–192 of 250 results
-
CWMS Series Commercial Mop Sink
The Willoughby CWMS Commercial Mop Sink is a stainless steel utility fixture for vandal-resistant commercial use. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CWMS fixtures come with a rectangular-shaped sink bowl (specify dimensions) and a 3” O.D. caulk drain with removable strainer. All plumbing connections and mounting points are underneath the CWMS mop sink (anchoring hardware by others). -
ES-1015-HC Handicap Stainless Steel Commercial Lavatory
The Willoughby ES-1015- HC Stainless Steel Handicap Commercial Lavatory is a single-user fixture for vandal-resistant commercial use. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard ES-1015- HC fixtures come with a rectangular-shaped lavatory bowl, 4” x 1-1/2” O.D. tailpiece, with anchoring through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The ES-1015- HC lavatory can be supplied with a variety of optional features including: faucet hole punching, valves, controls, plumbing, etc. (installed by others). All connections between the outside plumbing and the fixture are made underneath the vandal-resistant, stainless steel fixture. The ES-1015- HC lavatory fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WEL-2311 AquaSurf® Single Station Executive Lavatory
The Willoughby WEL-2311 AquaSurf® Executive Lavatory is a single-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WEL-2311 fixtures come with a rounded rectangular-shaped lavatory bowl, with anchoring through the included heavy gauge, Type 304 stainless steel mounting bracket (anchoring hardware and adequate backing by others). The WEL-2311 lavatory can be supplied with optional faucet hole punching and TE trap enclosure (installed by others). All connections between the outside plumbing and the WEL-2311 Executive Lavatory are made underneath, and the fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
CEL Multi-station Stainless Steel Lavatory
The Willoughby CEL Multi-station Stainless Steel Lavatory is a multi-user fixture for vandal-resistant commercial use. All CEL lavatory fixtures are fabricated from 14 gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard CEL fixtures come with an integral basin/pedestal; drain assembly; selected valve, controls, and plumbing; and stainless steel trap enclosure (shroud). It can be specified in either Two Station (CEL-2817- 2) or Three Station (CEL-4818- 3) configurations, with an Adult ADA or Junior ADA (JR) rim height. Anchoring is through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The CEL lavatory can be supplied with optional DC white powder coat finish. All connections between the outside plumbing and the CEL lavatory are concealed within the stainless steel pedestal. The fixture meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
18″ Wide Combination Lavatory/Toilet Unit
The Willoughby 18" Wide Combination Lavatory/Toilet Unit (1846-Series) is a single-user fixture for use in security environments with either 45-degree or 90-degree mechanical chases. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 1846-Series fixtures come with elongated blowout toilet, oval lavatory, and standard 4-point mounting. The 1846-Series Combination fixture can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
18″ Wide Combination Lavatory/Toilet Unit with Angled Lavatory Bowl
The Willoughby 18" Wide Combination Lavatory/Toilet Unit (1847-Series) is a single-user fixture with an angled lavatory bowl for use in security environments with either 45-degree or 90-degree mechanical chases. Willoughby Combis are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 1847-Series fixtures come with elongated blowout toilet, angled multi-sided lavatory, and standard 4-point mounting. The 18" Wide Combination Lavatory/Toilet Unit can be supplied with a variety of optional features including valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless Steel 18″ Wide Rear Mounted Handicap-ADA Compliant Rectangular Bowl Lavatory
The Willoughby HS-1014-96-HC Stainless Steel 18" Rear Mounted, Handicap-ADA Compliant, Rectangular Bowl, Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1014-96-HC fixtures come with a rectangular-shaped lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The HS-1014-96-HC lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The HS-1014-96-HC lavatory fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel Single Person Rear Mounted Washout Flush Straddle Urinal
The Willoughby UW-1412-WO Stainless Steel Single Person Rear Mounted Washout Flush Straddle Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1412- WO fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 4-point mounting. The UW-1412- WO urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. The UW-1412- WO urinal fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
US/KS-3660-HC ADA-Compliant Roll-In Cabinet Shower
Willoughby US/KS-3660-HC Roll-In Cabinet Handicap Showers are ADA-compliant single-user roll in showers for wheelchairs in security environments with an accessible mechanical chase. Unitized “US” fixtures are all-welded, fabricated from 14 gauge and 11 gauge, Type 304 stainless steel polished to a #4 satin finish, with slip-resistant glass-bead- blast finish floor; fixtures are also available in Knockdown “KS” configuration (non-welded). Standard US/KS-3660- HC Handicap Cabinet Showers come with an integral ICD inside caulk drain (2”), removable strainer, GB24 horizontal 24” grab bar, GB30 horizontal 30” grab bar, GB24V vertical 24” grab bar, and FSS fold-up shower seat. The US/KS-3660- HC Roll-In Handicap Cabinet Shower can be supplied with a variety of optional features including: valves, controls, plumbing, chase orientation, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. The US/KS-3660- HC Roll-In Handicap Cabinet Shower meets all applicable ADA, UFAS, and ANSI accessibility guidelines when equipped with shower valve controls mounted on the Back Wall of the fixture, adjacent to the FSS fold-up shower seat. -
APS User Adjustable Vandal Resistant Shower Head
Willoughby model APS User Adjustable, Vandal Resistant Shower Head shall be fixed type, constructed of Type 303 stainless steel, mounted from the rear with no visible fasteners or removable parts, and shall have a 30° angle of spray. The head shall have 3/8" F.I.P. threads on the inlet. Spray pattern is adjustable by the user. -
NPS Non-Adjustable Vandal Resistant Shower Head
Willoughby model NPS Non-Adjustable Vandal Resistant Shower Head shall be fixed type, constructed of Type 303 stainless steel, mounted from the rear with no visible fasteners or removable parts, and shall have a 30° angle of spray with an adjustable pattern. The head shall have 3/8" F.I.P. threads on the inlet. The shower head is non-adjustable from the user side. To adjust shower nozzle spray pattern, insert 1/8" Allen wrench through the nozzle orifice when shower is not in use, and turn counterclockwise to widen the spray pattern or clockwise to narrow the spray pattern. -
UBJ Universal Ball Joint Shower Head
Willoughby model UBJ Universal Ball Joint Shower Head shall be fixed type, constructed of chrome-plated brass, mounted from the rear with no visible fasteners or removable parts. The head shall have 3/8" F.I.P. threads on the inlet. The shower head spray direction is user adjustable. -
LBJ Lockable Ball Joint Shower Head
Willoughby model LBJ Lockable Ball Joint Shower Head shall be fixed type, constructed of chrome-plated brass, mounted from the rear with no visible fasteners or removable parts. The head shall have 3/8" F.I.P. threads on the inlet. The shower head spray direction can be locked in position using the recessed set screw. -
18″ Wide Front Access Combination Lavatory/Toilet Unit
The Willoughby 18" Wide Combination Lavatory/Toilet Unit (1846-FA-Series) is a front access single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. The fixture is designed for surface mounting on either a 45-degree or 90-degree interior wall. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 1846-FA-Series fixtures come with elongated blowout toilet, oval lavatory, and holes for 6-point anchor mounting (hardware provided by others). The 1846-FA-Series Combination fixture can be supplied with a variety of optional features including valves, controls, plumbing, etc., factory-installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. Removable access panels attached w/ security screws will allow access to all fixture plumbing and mounting points inside. -
CWLD Series Straight Front Stainless Steel Lavatory Deck
The Willoughby CWLD Straight Front Stainless Steel Lavatory Deck is a single- or multi-user fixture for vandal-resistant commercial use. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CWLD fixtures come with circular or oval lavatory bowls w/ OV overflows, elbow wastes w/ 1-1/2” O.D. connections, trap enclosure, with anchoring through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The CWLD lavatory deck can be supplied with a variety of optional features including: faucet hole punching, valves, controls, plumbing, etc. (installed by others). All connections between the outside plumbing and the fixture are made underneath the vandal-resistant, stainless steel fixture, within the standard trap enclosure/pipe shroud. The CWLD straight front lavatory deck meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
Stainless Steel 18″ Wide Front Mounted Handicap-ADA Compliant Rectangular Bowl Lavatory
The Willoughby HS-1014-96-HC-FA Stainless Steel 18" Wide Front Mounted Handicap-ADA Compliant Rectangular Bowl Lavatory is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1014-96-HC-FA fixtures come with a rectangular-shaped lavatory bowl, 1-1/2” F.I.P. slip-joint P-trap, with anchoring through the included Z-clip and mounting holes (anchoring hardware by others). The HS-1014-96-HC-FA lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The HS-1014-96-HC-FA lavatory fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
US/KS-3660-HC-FA ADA-Compliant Front Access Roll-In Cabinet Shower
The Willoughby US/KS-3660-HC-FA Roll-In Front Access Cabinet ADA Compliant Shower is a single-user fixture with a handicap shower base, intended for use in security environments where a mechanical chase is either non-existent or difficult to access. Unitized “US” fixtures are all-welded, fabricated from 14 gauge and 11 gauge, Type 304 stainless steel polished to a #4 satin finish, with slip-resistant glass-bead- blast finish floor; fixtures are also available in Knockdown “KS” configuration (non-welded). Standard US/KS-3660- HC-FA Handicap Cabinet Showers come with an integral ICD inside caulk drain (2”), removable strainer, GB24 horizontal 24” grab bar, GB30 horizontal 30” grab bar, GB24V vertical 24” grab bar, and FSS fold-up shower seat. The US/KS-3660- HC-FA Roll-In Front Access Handicap Cabinet Shower can be supplied with a variety of optional features including: valves, controls, plumbing, exterior finish, etc. All connections between the outside plumbing and the fixture are made behind the vandal-resistant, stainless steel shower panel. Removable shower panel attached w/ security screws allows access to all the fixture plumbing within. The US/KS-3660- HC-FA Roll-In Front Access Handicap Cabinet Shower meets all applicable ADA, UFAS, and ANSI accessibility guidelines when equipped with shower valve controls mounted on the Back Wall of the fixture, adjacent to the FSS fold-up shower seat. -
CWLDR Series Round Front Stainless Steel Lavatory Deck
The Willoughby CWLDR Round Front Stainless Steel Lavatory Deck is a single- or multi-user fixture for vandal-resistant commercial use. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard CWLDR fixtures come with circular lavatory bowls w/ OV overflows, elbow wastes w/ 1-1/2” O.D. connections, trap enclosure, with anchoring through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The CWLDR lavatory deck can be supplied with a variety of optional features including: faucet hole punching, valves, controls, plumbing, etc. (installed by others). All connections between the outside plumbing and the fixture are made underneath the vandal-resistant, stainless steel fixture, within the standard trap enclosure / pipe shroud. The CWLDR round front lavatory deck meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
CWSSS Series Commercial Surgical Scrub Sink
The Willoughby CWSSS Commercial Surgical Scrub Sink is a single- or multi-user stainless steel fixture for use in healthcare environments. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish, except for the bead-blast finish bowl. Standard CWSSS fixtures come with a deep rectangular-shaped bowl; knee-activated, positive on/off water valves; panel-mounted temperature / pressure-balancing mixing valves; laminar flow gooseneck faucets; machined stainless steel drain assembly; and 1-1/2” F.I.P. slip-joint P-trap. Scrub sinks can be specified in One- (CWSSS-1), Two- (CWSSS-2), or Three-Station (CWSSS-3) configurations. Anchoring is through the included Z-clips and mounting holes, with mounting carriers or floor-mounting bases as available options (anchoring hardware and adequate backing by others). The CWSSS scrub sink can be supplied with a variety of optional features including: alternate valves and controls, mounting carriers/bases, soap dispensers, etc. All connections between the outside plumbing and the CWSSS fixture are made within the stainless steel cabinet, with secure access panels allowing qualified maintenance personnel access to the mechanical equipment. -
Stainless Steel 15″ Wide Rear Mounted Lavatory
The Willoughby HS-1013-46-15 Stainless Steel 15" Wide Rear Mounted Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1013-46-15 fixtures come with a multi-sided lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The HS-1013-46-15 lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless Steel Single Person Rear Mounted Blowout Flush Straddle Urinal
The Willoughby UW-1412-BJ Stainless Steel Single Person Rear Mounted Blowout Flush Straddle Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1412- BJ fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 4-point mounting. The UW-1412-BJ urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. The UW-1412-BJ urinal fixture meets all applicable ADA and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
DB Series Dialysis Supply and Waste Box
The Willoughby DB-Series Dialysis Supply and Waste Box is a recessed, stainless steel utility fixture for use in healthcare environments requiring vandal-resistant access to dialysis equipment plumbing. DB-Series dialysis boxes are fabricated from Type 316 stainless steel, polished to a #4 satin finish. Standard dialysis boxes will include NSF-61 PVC, 1/2” nominal drain valves; 2-3/8” O.D. drain; 1/2” M.P.T. inlets, and 3/4” M.P.T. outlets. DB-Series fixtures are available in One- or Two-Valve; with or without locking door; with optional stainless steel valves and fittings. All plumbing connections are made behind or within the recessed wall box, with anchoring points for the wall box and the flush-mounted flange located inside the box perimeter (anchoring hardware by others). -
Stainless Steel Single Person Front Mounted Washout Flush Trough Urinal
The Willoughby UW-1814-WO-FA Stainless Steel Single Person Front Mounted Washout Flush Trough Urinal is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1814-WO-FA fixtures come with full perimeter flushing rim, 1-1/2” F.I.P. slip-joint P-trap, removable P-trap enclosure, with anchoring through the included Z-clip and front mounting flanges (anchoring hardware by others). The UW-1814-WO-FA urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal-resistant, stainless steel urinal. -
18″ Wide Ligature-Resistant Combination Lavatory/Toilet Unit
The Willoughby 18" Wide Combination Lavatory/Toilet Unit (1806-Series) is a ligature-resistant single-user fixture for use in security and behavioral environments with either 45-degree or 90-degree mechanical chases. These combis are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 1806-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, and standard 4-point mounting. It has been thoughtfully designed to minimize potential ligature points. Our Ligature-Resistant Combination Unit can be supplied with a variety of optional features including valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
18″ Wide Ligature-Resistant Front Access Combination Lavatory/Toilet Unit
The Willoughby 18" Wide Combination Lavatory/Toilet Unit (1806-FA-Series) is a ligature-resistant front access single-user fixture for use in security and behavioral environments where a mechanical chase is either non-existent or difficult to access. The fixture is designed for surface mounting on either a 45-degree or 90-degree interior wall. This combi is all-welded and fabricated from 14 gauge, T304 stainless steel polished to a #4 satin finish. Standard 1806-FA-Series fixtures come with elongated blowout toilet, ligature-resistant toilet skirt, oval lavatory, and holes for 6-point anchor mounting (hardware provided by others). It has been thoughtfully designed to minimize potential ligature points. The 18" Ligature-Resistant Combination Unit can be supplied with a variety of optional features including valves, controls, plumbing, etc., factory-installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. Removable access panels attached w/ security screws will allow access to all fixture plumbing and mounting points inside. -
20″ Wide Combination Lavatory/Toilet Unit with Offset Toilet Bowl
The Willoughby 20" Wide Combination Lavatory/Toilet Unit (2096-Series) is a single-user fixture with an offset toilet bowl for use in security environments, typically with 90-degree mechanical chases. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 2096-Series fixtures come with offset blowout elongated toilet, oval lavatory sink, and standard 4-point mounting. The 2096-Series Combination fixture can be supplied with a variety of optional features including valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
20″ Wide Combination Lavatory/Toilet Unit with Angled Toilet Bowl
The Willoughby 20" Wide Combination Lavatory/Toilet Unit (2046-Series) is a single-user fixture with an angled toilet bowl for use in security environments, typically with 45-degree mechanical chases. Our combis are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 2046-Series fixtures come with angled elongated blowout toilet, oval lavatory, and standard 4-point mounting. Our 20" Wide Combination Unit can be supplied with a variety of optional features including valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless Steel Single Person Rear Mounted Washout Flush Trough Urinal
The Willoughby UW-1814-WO Stainless Steel Single Person Rear Mounted Washout Flush Trough Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1814-WO fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 4-point mounting. The UW-1814-WO urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. -
Stainless Steel Single Person Rear Mounted Blowout Flush Trough Urinal
The Willoughby UW-1814-BJ Stainless Steel Single Person Rear Mounted Blowout Flush Trough Urinal is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1814-BJ fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 4-point mounting. The UW-1814-BJ urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. -
Stainless Steel Multi-Person Front Mounted Washout Trough Urinal
The Willoughby UW-1800-FA Stainless Steel Multi-Person Front Mounted Washout Trough Urinal is a multiple-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1800-FA-Series fixtures come with full-length rear flush chamber, 1-1/2”O.D. x 4”L. drain tailpiece, with anchoring through the included Z-clips and front mounting slots (anchoring hardware by others). Several trough lengths are available; see Spec Page for details. The UW-1800-FA-Series urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and top, left, or right side (depending on inlet location) of the vandal-resistant, stainless steel urinal. -
WBIS Series Rear Mounted Built-In Shower
The Willoughby WBIS Rear Mounted Built-in Shower is a single-user fixture for use in security environments with an accessible mechanical chase. Shower plates are fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WBIS fixtures come with an NPS shower head (stainless steel), 2 component shower plates (stainless steel shower wall panels), and standard 4-point mounting. The WBIS built-in shower can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear of the vandal-resistant, stainless steel plates. The WBIS can be installed to conform to most ADA requirements (installation by others). -
SB-Series Stainless Steel Shower Base
The Willoughby SB-Series Stainless Steel Shower Base is a single-user fixture for use in security environments. Fixtures are all-welded, fabricated from 14 gauge and 11 gauge, Type 304 stainless steel polished to a #4 satin finish, with slip-resistant glass-bead- blast finish floor. Standard SB-Series fixtures come with an integral EBD elbow waste (2” F.I.P.), strainer drain, and tiling flange. The SB-Series shower base can be supplied with a variety of optional features including: size, drain type, chase orientation, and exterior finish. All connections between the outside plumbing and the fixture are made within the vandal-resistant, stainless steel fixture. -
Stainless Steel Small Profile Handicap-ADA Compliant Front Access Drinking Fountain
The Willoughby DF-1812-FA Stainless Steel Small Profile Handicap-ADA Compliant, Front Access Drinking Fountain is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard DF-1812-FA fixtures come with a rounded rectangular basin, CDB drinking fountain bubbler, PSL1 single temperature non-metering valve, RPT slip-joint P-trap (1-1/2” F.I.P.), with anchoring through the included mounting plate (anchoring hardware by others). The DF-1812-FA drinking fountain can be supplied with optional features including: plumbing, mounting guides, etc. All valves and plumbing will be factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable bottom panel attached w/ security screws allows access to all fixture plumbing and mounting points inside. The DF-1812-FA drinking fountain meets all applicable ADA and ANSI accessibility guidelines when mounted at the correct applicable rim height above the finished floor (installation by others). -
Stainless Steel 20″ Wide Rear Mounted Rectangular Bowl Lavatory
The Willoughby HS-1015-20 Stainless Steel Wide Rear Mounted Rectangular Bowl Lavatory is a single-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard HS-1015-20 fixtures come with a rectangular-shaped lavatory bowl, 1-1/2” F.I.P. elbow waste, and standard 4-point mounting. The HS-1015-20 lavatory can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
WRS-FA Series Front Mounted Recessed Shower Panel
The Willoughby WRS-FA Front Mounted, Recessed Shower Panel is a single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixture panels are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard WRS-FA fixtures come with an NPS shower head and 18 gauge galvanized steel mounting frame (shipped separately). The WRS-FA shower panel can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within the vandal-resistant, stainless steel panel. Removable face panel attached w/ security screws allows access to all fixture plumbing and mounting points within. -
EWSSS Series Economy Surgical Scrub Sink
The Willoughby EWSSS Economy Surgical Scrub Sink is a compact, single- or multi-user, stainless steel fixture for use in healthcare environments. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #4 satin finish, except for the bead-blast finish bowl. Standard EWSSS fixtures come with a deep rectangular-shaped bowl; knee-activated, positive on/off water valves; inline thermostatic mixing valves; laminar flow gooseneck faucets; machined stainless steel drain assembly; and 1-1/2” F.I.P. slip-joint P-trap. Scrub sinks can be specified in One- (EWSSS-1), Two- (EWSSS-2), or Three-Station (EWSSS-3) configurations. Anchoring is through the included Z-clips and mounting holes, with mounting carriers or floor-mounting bases as available options (anchoring hardware and adequate backing by others). The EWSSS scrub sink can be supplied with a variety of optional features including: alternate valves and controls, mounting carriers/bases, soap dispensers, etc. All connections between the outside plumbing and the EWSSS fixture are made within the stainless steel cabinet, with secure access panels allowing qualified maintenance personnel access to the mechanical equipment. -
FMR1 Framed Security Mirror Rear Mounted
The Willoughby FMR1 Framed Security Mirror is a fabricated 16 gauge, Type 304 stainless steel accessory, designed to provide a simple, vandal-resistant alternative to traditional mirrors in a security environment. The FMR1 framed mirrors will come with a #8 non-directional mirror finish, full mounting frame w/ ½” fiberboard mirror backing, and mounting hardware for walls up to 8” thick. FMR1 security mirrors will require a chase for installation. -
HB Series Hose Box
The Willoughby HB-Series Hose Box is a recessed, stainless steel utility fixture for use in commercial, healthcare, and other environments requiring vandal-resistant plumbing access. HB-Series hose boxes are fabricated from Type 304 stainless steel, polished to a #4 satin finish. Standard hose boxes will include 1/2” nominal brass fittings, inlet screwdriver stops, 1/2” F.I.P. inlets, and 3/4” M.G.H.T. outlets. HB-Series fixtures are available in Dual or Single Temperature; with or without Door; with or without Vacuum Breaker; and with or without Waste Outlet. All plumbing supply connections are made behind the recessed wall box, with anchoring points for the wall box and the flush-mounted flange located inside the box perimeter (anchoring hardware by others). -
Stainless Steel Multi-Person Rear Mounted Washout Trough Urinal
The Willoughby UW-1800 Stainless Steel Multi-Person Rear Mounted Washout Trough Urinal is a multiple-user fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UW-1800-Series fixtures come with full perimeter flushing rim, integral stainless steel P-trap, and standard 8-point mounting. Several trough lengths are available; see Spec Page for details. The UW-1800-Series urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the rear (and top, on Top Spud fixtures) of the vandal-resistant, stainless steel urinal. -
Stainless Steel Rear Mounted Service Sink
The Willoughby Stainless Steel Rear Mounted Service Sink is a utility fixture for use in security environments with an accessible mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard SS fixtures come with a 10” deep rectangular sink bowl, 2” F.I.P. elbow waste, fast drain with air vent, and standard 6-point mounting for Off-Floor fixtures or 8-point mounting for On-Floor fixtures. The SS service sink can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
Stainless Steel Single-User Waterless Trough Urinal
The Willoughby WU-1010 Stainless Steel Single-User Waterless Trough Urinal is a single-user fixture for use in security environments where water supplies are not available or desired. Fixtures are all-welded, fabricated from 16 gauge, Type 304 stainless steel polished to a #3 satin finish. Standard WU-1010 fixtures come with a strainer and 1-1/2” MPT pipe nipple, along with anchoring through front mounting holes (anchoring hardware by others). -
HBBD Series Hose Box with Wall Flange and Boiler Drain Valve
The Willoughby HBBD-Series Boiler Drain Valve Hose Box is a recessed, stainless steel utility fixture for use in commercial, healthcare, and other environments requiring vandal-resistant drain valve access. HBBD-Series hose boxes are fabricated from Type 304 stainless steel, polished to a #4 satin finish. Standard boiler drain valve boxes will include 1/2” nominal brass boiler drain valves, 2” M.I.P. drain, 1/2” F.I.P. inlets, and 3/4” M.G.H.T. outlets. HBBD-Series fixtures are available in Dual or Single Temperature. All plumbing connections are made behind or within the recessed wall box, with anchoring points for the wall box and the flush-mounted flange located inside the box perimeter (anchoring hardware by others). -
Stainless Steel Front Mounted Service Sink
The Willoughby SS-FA Stainless Steel Front Mounted Service Sink is a utility fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard SS-FA fixtures come with a 10” deep rectangular sink bowl, 1-1/2” F.I.P. slip-joint P-trap, fast drain with an air vent, with anchoring through the included Z-clip and mounting holes (anchoring hardware by others). The SS-FA service sink can be supplied with a variety of optional features including: valves, controls, plumbing, etc., factory installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel fixture. Removable access panels attached w/ security screws allow access to all fixture plumbing and mounting points inside. -
SB-1823 Stainless Steel Shampoo Bowl
Willoughby SB-1823 Stainless Steel Barber Shampoo Bowls are single-user commercial fixtures for vandal-resistant commercial use. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard SB-1823 fixtures come with a contoured neck rest, contoured sink bowl, 3-1/2” O.D. basket strainer drain, and wall mounting bracket. The SB-1823 stainless steel shampoo bowl can be supplied with an optional faucet kit (WSB-KIT), which includes a single-handle adjustable faucet, hand-held sprayer, and fixture-mounted vacuum breaker. All connections between the outside plumbing and the fixture are made underneath the vandal-resistant, fixture, with anchoring through the included wall bracket and mounting holes (anchoring hardware and adequate backing by others). -
RTH Series Tissue Holder
The Willoughby RTH line of Recessed Toilet Tissue Holders (models: RTH1, RTH2) are die-formed 14 gauge, Type 304 stainless steel accessories, designed to accommodate a standard roll of toilet tissue. When the RTH tissue holder is stocked with a standard-size toilet tissue roll, it becomes nearly impossible to conceal any contraband behind the roll without the roll protruding out for the correctional officers to see. All mounting hardware or stainless steel security screws are typically provided with the tissue holder, with any needed wall anchors supplied by others. -
Stainless Steel Single Person Floor Mounted Stall Urinal
The Willoughby UF-1438 Stainless Steel Single Person Floor Mounted Stall Urinal is a single-user fixture for use in security environments with or without a mechanical chase. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard UF-1438 fixtures come with full perimeter flushing rim, 2” caulk waste connection, flat strainer drain, with anchoring through the front flanges (anchoring hardware by others). The UF-1438 urinal can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made at the bottom and rear or top (depending on inlet location) of the vandal-resistant, stainless steel urinal. The UF-1438 urinal fixture meets all applicable ADA and CBC accessibility guidelines. -
ASRTH Series Ligature-Resistant Tissue Holder
The Willoughby ASRTH Recessed Toilet Roll Holder (models: ASRTH1, ASRTH2, and ASRTH3) is a die-formed 14 gauge, Type 304 stainless steel accessory, designed to accommodate a standard roll of toilet tissue. When the ASRTH tissue holder is stocked with a standard-size toilet tissue roll, it becomes nearly impossible to conceal any contraband within the accessory. All mounting hardware or stainless steel security screws are typically provided supplied with the tissue holder, with any needed wall anchors supplied by others. The ASRTH tissue holder is ligature-resistant. -
WAF-2200/2201 AquaFount® Corner Mounted Two Station Solid Surface Washfountain
The Willoughby WAF-2200/2201 AquaFount® Corner Mounted Two Station Solid Surface Washfountain is a multi-user solid surface fixture for vandal-resistant commercial use. It can be specified in either Floor Mounted (WAF-2200) or Wall Mounted (WAF-2201) configurations, with an Adult or Juvenile (JR) rim height. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-2200/2201 fixtures come with a contoured multi-user lavatory basin; drain grate assembly; selected valve, controls, and plumbing; and preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). The WAF-2200/2201 washfountain can be supplied with an optional liquid soap dispenser. All connections between the outside plumbing and the WAF-2200/2201 AquaFount® Corner Mounted Washfountain are concealed within the stainless steel pedestal. The fixture does not meet ADA, ANSI, and CBC accessibility guidelines. -
RSD Wall Mounted Recessed Soap Dish
The Willoughby RSD line of Recessed Soap Dishes (models: RSD1 and RSD2) are die-formed 16 gauge, Type 304 stainless steel accessories, designed to accommodate a single bar of soap. All mounting hardware or stainless steel security screws are typically provided with the soap dish, with any needed wall anchors supplied by others. RSD soap dishes have wide-radius corners to help reduce residue build-up. -
WAF-3300/3301 AquaFount® Three Station Solid Surface Washfountain
The Willoughby WAF-3300/3301 AquaFount® Three Station Solid Surface Washfountain is a multi-user solid surface fixture for vandal-resistant commercial use. It can be specified in either Floor Mounted (WAF-3300) or Wall Mounted (WAF-3301) configurations, with an Adult or Juvenile (JR) rim height. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-3300/3301 fixtures come with a contoured multi-user lavatory basin; drain grate assembly; selected valve, controls, and plumbing; and preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). The WAF-3300/3301 washfountain can be supplied with optional liquid soap dispensers. All connections between the outside plumbing and the WAF-3300/3301 AquaFount® washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WAF-4400/4401 AquaFount® Four Station Solid Surface Washfountain
The Willoughby WAF-4400/4401 AquaFount® Four Station Solid Surface Washfountain is a multi-user solid surface fixture for vandal-resistant commercial use. It can be specified in either Floor Mounted (WAF-4400) or Wall Mounted (WAF-4401) configurations, with an Adult or Juvenile (JR) rim height. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-4400/4401 fixtures come with a contoured multi-user lavatory basin; drain grate assembly; selected valve, controls, and plumbing; and preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). The WAF-4400/4401 washfountain can be supplied with optional liquid soap dispensers. All connections between the outside plumbing and the WAF-4400/4401 AquaFount® washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor. -
WAF-3603 AquaFount® Three Station Half Round 36″ Solid Surface Washfountain
The Willoughby WAF-3603 AquaFount® Three Station, Half Round, 36” Solid Surface Deep Bowl Washfountain is a multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-3603 fixtures come with a contoured multi-user lavatory basin; drain assembly; selected valve, controls, and plumbing; and preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). It can be specified with an Adult ADA or Junior ADA (JR) rim height. The WAF-3603 washfountain can be supplied with optional liquid soap dispensers and/or wall-mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WAF-3603 AquaFount® washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (excluding FO - Foot Operated valve models). -
WWF-3603 Three Station Half Round 36″ Stainless Steel Washfountain
The Willoughby WWF-3603 Three Station, Half Round, 36” Stainless Steel Deep Bowl Washfountain is a multi-user fixture for vandal-resistant commercial use. All WWF-3603 deep bowl washfountain fixtures are fabricated from heavy gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard WWF-3603 fixtures come with an integral, contoured, multi-user basin; drain assembly; selected valve, controls, and plumbing; solid surface head cover; and stainless steel mounting pedestal. It can be specified with an Adult ADA or Junior ADA (JR) rim height, with anchoring through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The WWF-3603 washfountain can be supplied with optional liquid soap dispensers and/or wall mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WWF-3603 washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (excluding FLR Floor Mounted and FO Foot Operated valve models). -
WWF-4203/4204 Three and Four Station Half Round 42″ Stainless Steel Washfountain
The Willoughby WWF-4203/4204 Three / Four Station, Half Round, 42” Stainless Steel Deep Bowl Washfountain is a multi-user fixture for vandal-resistant commercial use. All WWF-4203/4204 deep bowl washfountain fixtures are fabricated from heavy gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard WWF-4203/4204 fixtures come with an integral, contoured, multi-user basin; drain assembly; selected valve, controls, and plumbing; solid surface head cover; and stainless steel mounting pedestal. It can be specified in either Three Station (WWF-4203) or Four Station (WWF-4204) configurations, with an Adult ADA or Junior ADA (JR) rim height. Anchoring is through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The WWF-4203/4204 washfountain can be supplied with optional liquid soap dispensers and/or wall mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WWF-4203/4204 washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (excluding FLR Floor Mounted and FO Foot Operated valve models). -
WAF-5403/5404 AquaFount® Three / Four Station Half Round 54″ Solid Surface Washfountain
The Willoughby WAF-5403/5404 AquaFount® Three / Four Station, Half Round, 54” Solid Surface Deep Bowl Washfountain is a multi-user solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-5403/5404 fixtures come with a contoured multi-user lavatory basin; drain assembly; selected valve, controls, and plumbing; and preassembled stainless steel mounting pedestal (anchoring hardware and adequate backing by others). It can be specified in either Three Station (WAF-5403) or Four Station (WAF-5404) configurations, with an Adult ADA or Junior ADA (JR) rim height. The WAF-5403/5404 washfountain can be supplied with optional liquid soap dispensers and/or wall-mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WAF-5403/5404 AquaFount® washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (excluding FO - Foot Operated valve models). -
WWF-5403/5404 Three and Four Station Half Round 54″ Stainless Steel Washfountain
The Willoughby WWF-5403/5404 Three / Four Station, Half Round, 54” Stainless Steel Deep Bowl Washfountain is a multi-user fixture for vandal-resistant commercial use. All WWF-5403/5404 deep bowl washfountain fixtures are fabricated from heavy gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard WWF-5403/5404 fixtures come with an integral, contoured, multi-user basin; drain assembly; selected valve, controls, and plumbing; solid surface head cover; and stainless steel mounting pedestal. It can be specified in either Three Station (WWF-5403) or Four Station (WWF-5404) configurations, with an Adult ADA or Junior ADA (JR) rim height. Anchoring is through the included Z-clip and mounting holes (anchoring hardware and adequate backing by others). The WWF-5403/5404 commercial hand sink can be supplied with optional liquid soap dispensers and/or wall mounted stainless steel kick plate (installed by others). All connections between the outside plumbing and the WWF-5403/5404 washfountain are concealed within the stainless steel pedestal. The fixture meets all applicable ADA, ANSI, and CBC accessibility guidelines when mounted at the correct applicable rim height above the finished floor (excluding FLR Floor Mounted and FO Foot Operated valve models). -
WAF-3606 AquaFount® Six Station Full Round 36″ Solid Surface Washfountain
The Willoughby WAF-3606 AquaFount® Six Station, Full Round, 36” Solid Surface Deep Bowl Washfountain is a floor-mounted, multi-user, solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-3606 fixtures come with a full-round multi-user lavatory basin; drain assemblies; selected valve, controls, and plumbing; and preassembled stainless steel floor pedestal (anchoring hardware by others). It can be specified with an Adult ADA or Junior ADA (JR) rim height. The WAF-3606 washfountain can be supplied with optional liquid soap dispensers and/or telescoping shroud for fixtures with supplies from above (installed by others). All connections between the outside plumbing and the WAF-3606 AquaFount® washfountain are concealed within the stainless steel head kit and pedestal. The fixture has one station that fully meets all applicable ADA and ANSI accessibility guidelines (excluding FO - Foot Operated valve models); the other five stations will comply with most but not all accessibility guidelines. -
WWF-3606 Six Station Full Round 36″ Stainless Steel Washfountain
The Willoughby WWF-3606 Six Station, Full Round, 36” Stainless Steel Deep Bowl Washfountain is a floor mounted, multi-user fixture for vandal-resistant commercial use. All WWF-3606 deep bowl washfountain fixtures are fabricated from heavy gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard WWF-3606 fixtures come with an integral, contoured, multi-user basin; drain assemblies; selected valve, controls, and plumbing; solid surface head cover; and stainless steel floor pedestal (anchoring hardware by others). It can be specified with an Adult ADA or Junior ADA (JR) rim height. The WWF-3606 washfountain can be supplied with optional liquid soap dispensers and/or telescoping shroud for fixtures with supplies from above (installed by others). All connections between the outside plumbing and the WWF-3606 washfountain are concealed within the stainless steel head kit and pedestal. The fixture has one station that fully meets all applicable ADA and ANSI accessibility guidelines (excluding FO Foot Operated valve models); the other five stations will comply with most but not all accessibility guidelines. -
WWF-4206 Six Station Full Round 42″ Stainless Steel Washfountain
The Willoughby WWF-4206 Six Station, Full Round, 42” Stainless Steel Deep Bowl Washfountain is a floor mounted, multi-user fixture for vandal-resistant commercial use. All WWF-4206 deep bowl washfountain fixtures are fabricated from heavy gauge, Type 304 stainless steel, with all exposed surfaces polished to a #4 satin finish. Standard WWF-4206 fixtures come with an integral, contoured, multi-user basin; drain assemblies; selected valve, controls, and plumbing; solid surface head cover; and stainless steel floor pedestal (anchoring hardware by others). It can be specified with an Adult ADA or Junior ADA (JR) rim height. The WWF-4206 washfountain can be supplied with optional liquid soap dispensers and/or telescoping shroud for fixtures with supplies from above (installed by others). All connections between the outside plumbing and the WWF-4206 washfountain are concealed within the stainless steel head kit and pedestal. The fixture has two stations that fully meet all applicable ADA and ANSI accessibility guidelines (excluding FO Foot Operated valve models); the other four stations will comply with most but not all accessibility guidelines. -
WAF-5406/5408 AquaFount® Six / Eight Station Full Round 54″ Solid Surface Washfountain
The Willoughby WAF-5406/5408 AquaFount® Six / Eight Station, Full Round, 54” Solid Surface Deep Bowl Washfountain is a floor-mounted, multi-user, solid surface fixture for vandal-resistant commercial use. Willoughby AquaSurf® lavatory fixtures are constructed of AquaSurf® cast polymer, antimicrobial resin—a stain-, impact-, and burn-resistant solid surface material. Standard WAF-5406/5408 fixtures come with a full-round multi-user lavatory basin; drain assemblies; selected valve, controls, and plumbing; and preassembled stainless steel floor pedestal (anchoring hardware by others). It can be specified in either Six Station (WAF-5406) or Eight Station (WAF-5408) configurations, with an Adult ADA or Junior ADA (JR) rim height. The WAF-5406/5408 washfountain can be supplied with optional liquid soap dispensers and/or telescoping shroud for fixtures with supplies from above (installed by others). All connections between the outside plumbing and the WAF-5406/5408 AquaFount® washfountain are concealed within the stainless steel head kit and pedestal. The fixture meets all applicable ADA and ANSI accessibility guidelines (excluding FO - Foot Operated valve models). -
RS Series Recessed Shelf
The Willoughby RS line of Recessed Shelves (models: RS1 and RS2) are all-welded 16 gauge, Type 304 stainless steel accessories, designed to provide a simple, vandal-resistant storage space. All mounting hardware or stainless steel security screws are typically provided with the recessed shelves, with any needed wall anchors supplied by others. RS recessed shelves can be specified in either rear-mounted or front-mounted configurations. -
26″ Wide Combination Lavatory/Toilet Unit with Offset Toilet Bowl
The Willoughby 26" Wide Combination Lavatory/Toilet Unit (2696-Series) is a single-user fixture with an offset toilet bowl for use in security environments, typically with 90-degree mechanical chases. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 2696-Series fixtures come with offset elongated blowout toilet, oval lavatory, and standard 4-point mounting. The 2696-Series Combination fixture can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. -
37″ Wide ADA-Compliant Combination Lavatory/Toilet Unit for 90° Chase Wall
The Willoughby 37" Wide Combination Lavatory/Toilet Unit (3696-Series) is an ADA-compliant single-user fixture for use in security environments with 90-degree mechanical chases. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 3696-Series fixtures come with elongated blowout toilet, oval lavatory, and standard 6-point mounting. The 3696-Series Combination fixture can be supplied with a variety of optional features including: valves, controls, plumbing, etc. All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. The 3696-Series Combination fixture meets all applicable ADA, UFAS, and ANSI accessibility guidelines; a CBC-compliant model 3696 is also available. ADA Compliance requires the addition of a Grab Bar (GB4296); sold separately, field installed. -
37″ Wide ADA-Compliant Front Access Combination Lavatory/Toilet Unit for 90° Interior Wall
The Willoughby 37" Wide Combination Lavatory/Toilet Unit (3696-FA-Series) is an ADA-compliant front access single-user fixture for use in security environments where a mechanical chase is either non-existent or difficult to access. The fixture is designed for surface mounting on a 90-degree interior wall. Fixtures are all-welded, fabricated from 14 gauge, Type 304 stainless steel polished to a #4 satin finish. Standard 3696-FA-Series fixtures come with elongated blowout toilet, oval lavatory, and holes for 5-point anchor mounting (hardware provided by others). This 37" Wide Combination Unit fixture can be supplied with a variety of optional features including valves, controls, plumbing, etc., factory-installed inside the fixture cabinet (unless noted). All connections between the outside plumbing and the fixture are made within or at the rear of the vandal-resistant, stainless steel cabinet. Removable access panels attached w/ security screws will allow access to all fixture plumbing and mounting points inside. The 3696-FA-Series Combination fixture meets all applicable ADA, UFAS, and ANSI accessibility guidelines; a CBC-compliant model 3696-FA is also available. ADA Compliance requires the addition of a Grab Bar (GB4296); sold separately, field installed.